CTS Temperature Shock Test Chamber TSS-70/130 Hot: +50°C to +200°C Cold: -80°C to +100°C 130L

CTS TSS-70/130

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Gedpfezf Ibkox Aipsuh Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Memmert Type: CTC 256 Memmert CTC 256 Climate Testing Chamber Temperature and Humidity Testing Chamber Industrial Quality For sale is a high-quality climate testing chamber / temperature testing chamber from the manufacturer Memmert, type CTC 256. The unit comes from professional use and is ideal for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is used for the precise simulation of temperature and climate conditions. It enables both cooling and heating processes, and – in this version – the control of humidity. This makes the unit perfect for material testing, aging tests, climate stress tests, and long-term tests under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time profiles can be set. The forced-air circulation system ensures a uniform temperature distribution in the interior. Measurement data can be documented and further processed externally via existing interfaces. Equipment: Temperature and climate testing chamber (heating & cooling) Humidity control Electronic control with program function Forced-air circulation system for uniform temperature distribution Internal data logger USB and Ethernet interface Additional socket 230 V Cable entry (side) Water tank system (humidification/condensate) Mobile on castors Technical data: Manufacturer: Memmert Type: CTC 256 Device type: Climate testing chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Gujdpfoy D Ni Aox Aipjh Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (See picture) Memmert CTC 256 climate testing chamber Insert grid Water canister Documents Delivery as shown in the picture (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heating capacity: 4500 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Fuse, on customer side: 32 A, slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB (A) Side access port: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following information: Guodpfx Asyu Rhgjipsh The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Guedpfx Aiozd R Auepoh Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.