Beverage making machine

Bottling Krones Aseptic Bottling Complete Line 36.000 bph

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Type: air blades Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Year: 2009 Cjdjtqfcgepfx Abropt TWIN PACK handle applicator Year: 2000

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps Cpjdpfexvda Dox Abrst - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Codpoxd Ap Hsfx Abrspt Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: used, Year of construction: 2004, functionality: fully functional, NP 684 | COMPLETE BOTTLING LINE PET KRONES 30,000 BPH Product: Still water (with neck modification can also process sparkling) Capacity: - 30,000 BPH with 0.5L bottles - 30,000 BPH with 1.5L bottles - 22,000 BPH with 2L bottles Total working hours: 56,000 Preform Tipper M. Tanner AG: - Model: VZT-4010 - Year: 2004 Preform Washing System Krones: - Year: 2004 High Pressure Compressor Ateliers Francois: - Model: 20G282 - Year: 2004 - Pressure: 40 BAR Codpfjxl R Uajx Abropt PET Blower Krones: - Model: Contiform 20 - Year: 2004 - Number of cavities: 20 - Molds not included - Complete with preform feeder and orientator Cap Elevator and Orientator Gassner: - Year: 2004 - Supported cap types: Plastic pre-threaded cap - Type: Mechanical Cap Elevator and Orientator Gassner (Sport Cap): - Year: 2004 - Supported cap types: Sport cap - Type: Mechanical CIP Steinecker: - Model: Media - Year: 2004 UV Sterilization Station WEDEDCO: - Year: 2004 - Water treatment by UV rays KRONES Monoblock (filler and capper): - Model: Isofill - Year: 2004 - Rotation: Counterclockwise - Electric height adjustment Filler: - 88 valves - Filling type: Isobaric - Valve type: Mechanical - With degassing Capper: - 22 heads - Supported caps: Pre-threaded plastic; Sport Cap - Distribution: Pick & Place system Bottle Inspector Heuft: - Model: HBBVXTXXX - Year: 2015 - Bottle flow: Right to left - Inspection: Overfill, underfill, cap presence, cap misalignment Bottle Conveyors Krones: - Year: 2004 Labeller Krones: - Model: Contiroll - Year: 2019 - Rotation: Clockwise - Electric head adjustment - 18 mechanical cam heads - 1 roll-fed station - wrap-around label - Label presence control Shrink Wrapper Variopac: - Year: 2004 - Execution: Film only Wrap Around Packer Krones: - Model: Wrapapac - Year: 2004 - Hot glue system: Nordson - Packaging formats: 12x1.5L, 24x0.5L - Hours used: 1000 Bundle/Box Conveyors Krones: - Year: 2004 Handler Comag: - Model: H 55/2 - Year: 2004 - Double lane Palletizer Krones: - Model: Pressant - Year: 2004 - Package types: Bundles, boxes - Type: Push - Pallet warehouse - Interlayer system - Dual infeed Pallet Wrapper Robopac: - Model: HELIX HS 30 - Year: 2004 - Wrapping type: Rotating arm - Pre-stretch system

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. Cpedpfxoxm Rmxj Abrot The machines have seen little use since 2019 and remain in good condition.

Condition: used, Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour. Additional title: with pressure tank Cpedew Tlq Hopfx Abrjt Capacity: 1000 l/h Compressed air: 6 bar for control air Operation / Control: HMI on switch cabinet Base construction: mounted on frame Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

Condition: used, Year of construction: 2014, operating hours: 32,886 h, Used Blow Molding Machine KRONES Contiform S14 year 2014 Introduction: Revolutionizing Bottling Operations In the realm of bottling technology, the Used Blow Molding Machine KRONES Contiform S14, crafted in 2014, emerges as a paragon of efficiency and precision. Developed by Krones, this rotary-type machine redefines the standards of production, boasting unparalleled features and capabilities. Engineering Excellence: Unraveling the Components At the core of the Contiform S14 lies a meticulously engineered mold with 14 cavities, designed to accommodate diverse production needs. This configuration ensures optimal utilization of resources while maintaining high output rates. Complementing this design is the machine’s impressive operational speed, reaching up to 28000 bottles per hour, a testament to its efficiency in meeting demanding production schedules. Power and Performance: A Closer Look to the Blow Molding Machine KRONES Contiform S14 The Contiform S14’s power lies in its robust blow mechanism, generating 266 kW of force to shape each bottle with precision and consistency. Furthermore, the integrated chiller, with a capacity of 13 kW, ensures that temperature-sensitive processes remain stable, guaranteeing product quality throughout production cycles. Such meticulous attention to detail underscores Krones’ commitment to delivering reliable solutions for bottling operations. Flow Dynamics: Optimizing Production A critical aspect of any bottling machine is its flow rate, and the Contiform S14 excels in this regard. With a flow rate of 1300 m3/h, this machine facilitates seamless processing of materials, minimizing downtime and maximizing productivity. This feature is particularly advantageous for industries with high-volume production requirements, where efficiency is paramount. Structural Integrity: Built to Last Cedpfx Absvgu Ecsrspt Durability is a cornerstone of the Contiform S14’s design, evident in its substantial weight of 25 tons. This robust construction not only ensures stability during operation but also enhances longevity, minimizing maintenance requirements and associated costs. Moreover, the machine’s rotary design further enhances its reliability, enabling continuous operation with minimal downtime. Electrical Efficiency: Powering Performance Efficiency extends beyond mechanical components to electrical systems, and the Contiform S14 excels in this aspect as well. Operating at 400V, 6Hz, and drawing 337A, this machine optimizes power utilization, reducing energy wastage and operating costs. Such efficiency is crucial for sustainable operations, aligning with contemporary environmental standards and regulations. Current Status: Ready for Deployment Despite its advanced capabilities, the Contiform S14 currently resides in storage, awaiting deployment in bottling facilities seeking to enhance their production processes.

Condition: good (used), For sale - injection molding machine, aggregate, machine for the production of EPS polystyrene shapes - thermoboxes, fishboxes - used, very good condition. The machine is currently still connected to the installation, which will make it easier for the buyer to dismantle and mark individual connections - Complete machine, ready to be connected to a steam installation, transport of EPS granulate, electricity, compressed air, cooling system. - Year of production 2023 - configurable mold for the production of polystyrene thermoboxes, fishboxes, 3 sizes, with or without holes, with a lid - a total of 6 configurations - complete boxes with lids are produced in one cycle - no need to change molds. - the set includes the rights to the design of boxes, fishboxes - documentation, ATTENTION! the machine can produce EPS building shapes for walls, ceilings !! - examples in one of the photos. We have other elements of the production line, check our ads. We also have other elements/devices for sale, such as: - injection molding machine, aggregate, machine for the production of EPS polystyrene foundation plates + plate mold - Certus container steam boiler room (oil steam generator) - EPS foamer - steam installation: boiler room - machines - 3m3 steam tank - installation for transporting foamed EPS - EPS silos - polystyrene crusher Csdoua Dqispfx Abrjpt - many spare parts Possibility to send more photos and information by email. Possibility to sell individual components of the set separately.

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Codpfewzvl Sjx Abrjpt

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Cjdpfx Aovddkvsbrept Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition