Glass cutting table

BOTTERO 520 LAM-37

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Gjdpfx Asycgiijf Dsbh Minimum measurement: 150 mm Maximum cutting length: 3700 mm Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Maximum glass weight for loading/unloading on arms: 450 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Gbedownww Nspfx Af Djh

Condition: used, • Type – 490P/LFB/1Q+14 No. 2020/6450 • Semi-automatic for split strips • Cutting head can be automatically switched between longitudinal and cross-cutting • Digital display for longitudinal and cross-cutting • Cross-cutting drive: Automatic • Longitudinal cutting by pulling the cutting bridge over the cutting table Gbjdpowcz Rijfx Af Deh • Complete table is pneumatically tiltable • Air cushions • Breaking bars • Working height approx. 900 mm • Table length – 3800 mm, width – 2500 mm • Width with cutting bridge 2800 mm • Year of manufacture approx. 2020 • Price upon request

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition Gbjdpjiy Dtbjfx Af Deh As is Available immediately

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Gjdpou Rqq Hjfx Af Debh Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Year of construction: 2006, condition: ready for operation (used), Inclination: 7°, compressed air supply: 6.5bar, connected load: 8.5kW, length: 4170mm, width: 2990mm, height: 3330mm, weight: 2.8t, including documentation. Gedpfx Afoibiivo Dobh

Condition: new, Year of construction: 2025, operating hours: 20 h, functionality: fully functional, total width: 3,596 mm, total length: 4,865 mm, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, Bottero 353BKM-R: Loading, cutting, Low-E grinding and breakout table. 2–19mm – Max cutting speed: 150m/min – Max grinding speed: 80m/min – Max sheet dimension: 3810x2750mm. Shape scanner, sonar detection for special glass/materials, machine computer with onboard software. Gjdpfsx Ah Ifox Af Dsbh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. Gedpor Ak Exofx Af Djbh There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Godpfexg Nxyex Af Djbh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Godpfx Afewd Ihqs Debh Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Stand-Alone or integrated into the ISO Line Very easy operation with nearly no maintainance.