Filling System

AMTEC SAMPLE-SYS SML CP2

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Djdsrivv Ejpfx Akcowc Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: M254, type of input current: AC, input voltage: 380 V, total width: 4,000 mm, total length: 3,000 mm, total height: 150 mm, Equipment: documentation/manual, Due to relocation of production, this machine has been put up for sale. Our business consists of selling essential oils that were filled with this machine. Operating instructions available. Djdpfx Akevkcavjcewc

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Dwedsubyyvepfx Akcsc

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line; possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute; filling capacity: 20-60ml; 1.75kW; 6-8bar. All theses specifications are just examples. The final system will be custom-built. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. Dodpfov Nlbyjx Akcswc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops. The system includes an container unscrambler, which sets the small bottles into an infeed line. Module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. The system is PLC controlled. The total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. All liquid touching parts are made of stainless steel SS316 completely. - Specifications: Filling precision: < +/- 0.5%; max. speed of the machine in neutral: 120 bottles/minute; filling capacity: 5-30ml; 380V, 3.8kW; 6bar. All these specifications only are sample specifications. Depending on the final working process they will vary. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dedpfx Ajv Nlbtskcswc

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Dwjdpfx Asyuyruokcsc Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual