Clean air extraction unit ALKO Power Unit 250 P - used -

AL-KO Power Unit 250 P

Condition: new, AL-KO POWER UNIT 250 P - Exhibition machine - Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 250 mm, Nominal volumetric flow: 3,534 m³/h, Maximum volumetric flow: 4,900 m³/h, Maximum negative pressure: 3,184 Pa, Filter area: 22.4 m², Chip collection volume: 2 x 250 liters, Number of bags: 2, Nsdo Aaz S Nopfx Af Ejlh Motor 400 V: 7.5 kW, Dimensions (L x W x H): 2,351 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 758 kg, According to: GS - HO - new exhibition machine -

Condition: good (used), Year of construction: 1970, Cutting range round/square: 190/190 x 190 mm Cutting range at 45° mitre round/rectangular: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 stroke speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Njdpfx Afjyvfp Ie Eelh Required space: 1200 x 600 x 980 mm

Condition: as good as new (ex-display), Clean air filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 250 mm Nominal volume flow: 3,534 m3/h Maximum volume flow: 4,900 m3/h Negative pressure at Vnenn: 3,184 Pa Filter area: 22.4 m2 Nsdpfx Afehfmpxj Ejlh Compressed air cleaning including integrated pre-separator including integrated extinguishing system including inverter for speed control including integrated sound insulation shroud (-4 dB(A)) Chip collection volume: 2 x 250 l Sound pressure level: 71 dB(A) including dust baffle Dimensions L x W x H = 3000 x 1058 x 2361 mm Weight 850 kg

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Nsdsbuvbrspfx Af Ejlh Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2260x920x2250 mm Weight 450 kg Nodpfx Afsvz Eiuo Ejlh Total power requirement 7,5 kw

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Nodpfxjcdr Ens Af Eolh Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Nodpfjcdr E Asx Af Ejlh Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: used, Year of construction: 1997, Suction nozzle diameter: 200 mm Maximum volumetric flow rate: 3,200 m³/h Nominal volumetric flow rate: 2,862 m³/h Volumetric flow monitoring: Differential pressure display Negative pressure: 2,336 Pa Filter surface area: 16.8 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: dB Chip bag volume: l Filter cleaning: Pneumatic Motor power: 4 kW Machine length: 2,300 mm Machine width: 900 mm Nledpfxsx Edmvs Af Eeh Machine height: 2,200 mm Weight: 350 kg

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Nlodpscdy I Rsfx Af Esh Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2026, Capacity: 5500 m³/h Motor power: 5.5 kW Voltage: 3-phase / 380 V Net weight: 700 kg Dimensions (L x W x H): 2289 x 1160 x 3063 mm Material: Galvanized sheet steel, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 0.9 bar Sound power level: 65 - 75 dB(A) Negative pressure: 2200 - 2500 Pa Filtration area: 30 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted for use in environments with dust explosion hazards in accordance with the requirements ATEX. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the machine finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application Nlsdezx Av Ajpfx Af Eoh The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.