Used Wood shredder for sale (379)

Condition: good (used), Functionality: fully functional, Phenix make Cgsb Ey Rsvk U I Sjcqot Shaft diameter 40 cm Shaft length 680 mm Knife - cube set at an angle of 45 degrees Hydraulic drive Pump motor 45 kW Hydraulic pressure drawer 30 mm sieve

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, Functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Satrind can still be seen working and can be used immediately. power 44 KW is 60 HP Cgjb Ey Rju Abkhjcqjt

Year of construction: 2009, Condition: excellent (used), motor power 37kW capacity 4-7m3/h shaft length 1000mm shaft diameter 226mm weight c.a. 3t hydraulic pressure Ceb Ey Rcoikvugsqsgt pump motor power 2,2kW

Condition: like new (used), ‒ 4 knives ‒ Shock absorber set ‒ Trapezoidal belt set ‒ Motor pulley ‒ 6 m conveyor belt including 1 motor head, 3 elements of 2 m and 1 terminal element ‒ Chute for gravity feeding Cgob Ey Refl Swbocqot ‒ Piping ‒ Replacement knives ‒ Electrical equipment including 100 HP main motor with slides, starter box, discontactors, button box, cabin presentation

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 061-24, first registration: 06/2024, overall weight: 12,000 kg, fuel type: electric, color: grey, Log debarking machine Two debarking rollers of 9000 mm. length each one. Lower belt for bark removal Cgob Ey Retywmtocqot Side gate opening for log exit, with remote control Electric panel included with variable speed drives to control the rotation speed of the rotors.

Year of construction: 2022, operating hours: 20 h, Condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm Csb Eof N Nk Hey Rcqjgt • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,154 h, Functionality: fully functional, machine/vehicle number: 1P9BA5134JE352360, power: 827 kW (1,124.41 HP), first registration: 05/2018, fuel type: diesel, color: blue, loading space width: 600 mm, Super OFFER!! THE PETERSON 5000H WHOLE TREE CHIPPER PRODUCES HIGH QUALITY LOW BARK CONTENT CHIPS FOR WOOD PULP AND PELLETS, PROCESSING WHOLE TREES IN ONE CONTINUOUS OPERATION. Cgob Ejtq E Rgey Rcqet Equipped with a large feed throat, the 5000H Whole Tree Chipper can accept up to a 23 inch (56 cm) diameter single tree or multiple smaller stems. The 5000H Whole Tree Chipper can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The standard three-pocket disc produces chips from 5⁄8 to 1 1/4 inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long. Chipping production rates up to 100 tons (90 tonnes) per hour can be achieved depending on chip size and wood characteristics.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Cgsb Ey Rshclffjcqet Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: ready for operation (used), Motor power - 18.5 kW Cob Esvbbfrsy Rcqjgt Shaft width - 350 mm Shaft diameter - 252 mm 18 knives on the shaft Capacity - approx. 600 kg/h Year of manufacture - 2006 Shaft speed - 620 rpm Length of the feeding trough - 4.9 m

Condition: ready for operation (used), Year of construction: 2012, Reinbold AZR 600 waste wood shredder / chipper only 697 hours Year of construction 7/ 2012 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 18.5 kW CE Cgjbot Ivlie Ey Rcqjt Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg Price 12500.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, power: 11.03 kW (15.00 HP), input voltage: 400 V, The small, compact wood shredder for the joinery Small space requirement Sophisticated technology Energy-efficient drive concept Homogeneous wood chip quality Further information Drive: Belt drive with 2-stage shaft-mounted gearbox and elastomer damper Rotor speed: 85 rpm Rotor length: 516 mm Rotor diameter: 248 mm Number of blade rows: 1 Number of cutting tools: 14 pcs. Type of cutting tool: ÜSS Hole screen diameter: 15-20 mm Cgsbsu Ei Srs Ey Rcqet Hopper design: Standard Control type: Siemens LOGO, incl. automatic switch-off Discharge system: Suction spout without screw conveyor Discharge side: Floating bearing Discharge speed Suction speed: at least 22 m/s Filling opening: 516 x 830 mm Machine housing: RAL7012 Protective cover: RAL1004 Control cabinet: RAL7035 light gray

Condition: new, Year of construction: 2024, Functionality: fully functional, Rotor speed: 90 rpm Hopper volume: 2,1 m³ Drive motor: 30 kW Hydraulic: 2,6 kW Cgjb Eeuiuvzey Rcqjt Rotor diameter: Ø370 mm Rotor width: 1100 mm The MASUR compact shredder are machines with a slow running rotor and quiet in operation. They are of robust construction and have a large feed hopper. The machines have drive motors with sizes ranging from 22 to 45 kW and a star-delta routine. The material is forced onto the cutter rotor by means of a hydraulic ram. The pressure of the ram is regulated via a pressure sensor system, allowing for fully automatic chipping.

Year of construction: 2024, Condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips Cgjb Ey Roful Uijcqst - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Cob Ey Rcjr Dvdkoqsgt

Condition: good (used), motor power 11kW bin dimensions 940x700mm hydraulic pressure unit shaft length 700mm shaft speed 110 RPM capacity 180-220 kg/h Cjb Eyoirtvco Rcqsgt

Condition: excellent (used), Year of construction: 2017, I sell the wood shredder LAIMET LS-21/E, Cob Ey Rcst S Ertjqogt Year 2017 Spiral system, very quiet. 315x210mm input in the shredder Motor 30KW Leistung Zirka 25m3 / hr. (40-70mm / 30-50mm / 20-30mm) Condition very good. Avialable immediately.

Condition: good (used), Year of construction: 1996, operating hours: 1,000 h, Functionality: fully functional, fuel type: diesel, bar diameter: 600 mm, product height (max.): 150 mm, product length (max.): 10 mm, product width (max.): 150 mm, TECHNICAL DETAILS Ceb Ey Rcsvgb Hyeqjgt Machine type: Mobile auger chipper Drive: Diesel engine Engine: 8 cylinder Scania Chassis: Tracked chassis Maximum trunk diameter: 60 cm Wood chip size: approx. 15 x 15 x 1 cm MACHINE DETAILS Length: approx. 9,000 mm Width: approx. 2,800 mm Height: approx. 3,600 mm Weight: approx. 16 t Operating hours: approx. 1,000 h Tank capacities Diesel tank: approx. 500 l Hydraulic tank: approx. 1,500 l

Condition: new, Year of construction: 2024, Functionality: fully functional, Dimensions: 2035 x 1275 x 1100 mm Infeed width: 600 mm Infeed height: 500 mm Inlet height: 150 mm Infeed roller: Ø240 mm Rotor speed: ca. 284 rpm Screen size: 20 x 20 mm or upon agreement Drive motor: 22 kW Infeed motor: 2 x 1,1 kW Outfeed screw: 0,37 kW Weight: ca. 1700 kg Cgsb Ey Rceuiurijqst Noise level: ca. 95 - 105 dB(A)

Year of construction: 2024, Condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm Cob Eyonyidbe Rcqsgt - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Condition: used, Year of construction: 2023, machine/vehicle number: 510-4690, Vorführmaschine! Listenpreis: 33.390,- Das Maschinenkonzept Die Weima Hochleistungs - Zerkleinerer mit ihren flexiblen Einsatzmöglichkeiten können alle Arten von Holzwerkstoffen ( Hartholz, Weichholz, Spanplatten, MDF-Materialien, Sperrholz, Furnierreste usw. ) zu Brennspänen verarbeiten und erzielen hierbei, bei sperrigen Materialien, eine enorme Volumenreduzierung des Materials. Funktionsweise: Die Maschine ist mit einem großen Einfülltrichter ausgestattet und kann mittels eines Förderbandes oder von Hand beschickt werden. Dieser Trichter kann den individuellen Bedürfnissen angepasst werden und garantiert eine kontinuierliche und kostengünstige Materialzuführung, ohne dass manuelle Hilfe in Anspruch genommen werden muss. Der hydraulisch gesteuerte Schieber führt die zu zerkleinernden Holzabfälle dem Schneidbereich des Rotors zu und wird dabei automatisch und lastabhängig gesteuert. Die innenliegenden Schieberführungen sind aus hochabriebfestem Kunststoff ( Polyamid ) und können nachgestellt werden. Die Hydraulikzylinder sind kardanisch aufgehängt, um Querkräfte auf die Kolbenmanschetten zu vermeiden. Der patentierte und profilierte V-Rotor aus Vollstahl hat einen Durchmesser von 252 mm und arbeitet mit einer Rotordrehzahl von 80 - 120 U/min. Die konkav geschliffenen, aggressiven und 4-fach drehbaren Messer / Schneidwendekronen befinden sich in eingefrästen Messertaschen auf speziellen Messerträgern. Dieses patentierte System garantiert, durch die damit erstmals mögliche Reduzierung des Schnittspaltes zwischen Gegenmesser und Rotor, hohe Durchsatzleistung, geringen Energieverbrauch und einen optimalen Austrag des zerkleinerten Materials. Die Kraftübertragung von den Elektromotoren erfolgt über Keilriemen auf ein stark dimensioniertes Getriebe, welches an einer Rotorseite auf dem Wellenstumpf angebracht ist. Grundausstattung: V-Rotor mit einer Messerreihe 40 x 40 mm -Schwingungsdämpfende Maschinenfüße -Niederhalter am Schieber -Horizontalschieber -Schaltschrank mit 5m Kabel inkl. SPS Steuerung und Textdisplay LOGO! -Schraubsieb -WEIMA WAP-Getriebe -Absaugstutzen Ø160 mm -Gerader Trichter Zusatzausstattung: -Zusätzliche Rotormesserreihe (28 Messer) - Freischneidender Trichter (LOGSPACER) -Segmentboden 4-seitig -Schnelle Hydraulik rückwärts mit Schockventil Cebovfy Rze Ey Rcqjgt

Condition: new, main motor power 18,5kW hydraulic pump motor power 1,5kW bin dimensions 630x810mm shaft length 630mm cubic knives Cob Ey Rcokn D Dksqegt sieve 15mm

Condition: excellent (used), Year of construction: 2004, I sell the horizontal wood shredder DI Mechanik SDOP 400/3, Made in Slovakia Year 2004 Cylinder system with 3 knives. 400x150mm input in the shredder Cob Ey Rcet S Euneqegt Motor 30KW Productivity apprx 5-7 m3 / hr. Condition like new. Avialable immediately.

Condition: new, Year of construction: 2024, Functionality: fully functional, Technical data: • Hopper opening: 980x540mm • Dimensions: ca. 1750x1100x1700 mm • Hopper volume: ca. 0,7 m³ • Rotor diameter: Ø250mm • Rotor width: 500mm • Rotor speed: ca. 100U/min • Drive motor: 11kW Cgob Ey Rcsuiuqxoqet • Noise level: 85dB(A) Lieferumfang: • Wood shredder with rotor • Cutters and counterknifes • Panel, ready wired, Siemens PLC

Condition: good (used), motor power 7,5kW hydraulic pressing unit dimensions of bin 500x1100mm bin with cover capacity 0,5-1,4m3/h Cgsb Ey Reirtvyocqjt rotor length 505mm rotor diameter 194mm

Condition: good (used), Year of construction: 2009, motor power 37kW Cob Ey Rcoh S Dmueqjgt capacity 4-7m3/h shaft length 1000mm shaft diameter 226mm weight c.a. 3t hydraulic pressure hydraulic pump motor power 2,2kW