Condition: used, Year of construction: 2008, 39 Mio. impressions approx. 370×520 mm (14×20″) CP-Tronic Dkjb Ezevn R Aysvnkol Alcolor Autoplate Streamfeeder Autom. ink roller washer, Autom. blanket washer, Low-pile delivery Powder sprayer Plusversion Available: at short term

Condition: excellent (used), Year of construction: 2020, operating hours: 13,051 h, Functionality: fully functional, input voltage: 240 V, Markforged ONYX Pro, Gen2. Able to print continuous fibres into nylon parts. The Onyx pro mainly printed with Nylon and fibreglass. This printer has recently had Mark Two Print head fit allowing you print Carbon and Kevlar. I have been able to use 3DXTech Obsidian, Fibreethree and Fiberon PA-CF20 Nylon with great success. Equal in print quality when printing with mark forged ONYX but at A quarter the price when using Fiberon. I have had the machine the since new, May 2020. It is exceptional machine and produces great strong parts. Our was printing carabiners for safety lanyards. And these carabiners were able to withstand 350+ kg using only fibreglass. So if you want to produce strong end use parts this is a great machine. Any questions please do ask. Comes the original Dry Box to store the Nylon while Printing Ships in Non-Original Box Dksb Eswg Ey Ajzvnkjl

Condition: used, Year of construction: 1989, Bookbinding or embossing of leather and other materials Height-adjustable pull-out table 35 x 25 cm Embossing plate surface 12 x 10 cm (die attached to double-sided adhesive tape) 220 V power supply Cycle counter A great advantage of the machine is the possibility to set a smooth step shift of the foil according to the required size of the die. The shift is triggered automatically via the embossing lever. The heating range of the head is up to approx. 250 °C. Dobov Nikre Ezvnkjkl

Condition: used, Year of construction: 2000, approx. 34 million prints Format:36 x 52 cm Varn Kompac dampening Plus version Straight machine Dksb Ezvov Ax R Isnkel available April 2025

Condition: used, Gathering Machine Laconda B4 25 stations with double sheet and missing sheet control good working condition Djb Ezvjtvrplsnkokl short-term available

Condition: used, 2-spindle paper drilling machine Nagel Citiborma 280b good working condition short-term available Dkeb Ezvorudbfsnkel

Condition: used, Year of construction: 1997, approx. 107 million prints 37 ×52 cm (14×20″) CPC-104 Dkob Eoui U I Eozvnkol CP-Tronic Alcolor Autoplate Streamfeeder Autom. Ink roller-, blanket and impressioncylinder wash-up device Perfecting 2/2, Low-pile delivery Plusversion Powder sprayer Available: at short term

Condition: used, Year of construction: 1995, Gathering machine Horizon HAC15 Tower a/b/m 4x15 stations 1 gathering tower HAC 15a 1 gathering tower HAC 15b Dkjbentdw Te Ezvnkel 2 gathering towers HAC 15m 15 stations each friction feeder with 40mm loading height each delivery / stacking table Stielow ST-20 Technical data: Paper size max. 31,8 x 7mm paper size min. 14,8 x 21mm missing/double sheet control paper weights 40 - 200 g/sqm Output approx. 4800 cycles/h

Condition: used, Year of construction: 1988, Stahl Folder T 49-4 4 buckles 1 blade Djb Ejruu Hzszvnkjkl

Condition: used, Year of construction: 2009, Duplo DC-445 Du-Creaser grooving machine good condition Dob Ezeqw Eknsvnkokl available at short notice

Condition: used, Year of construction: 2010, approx. 176 million prints 53 x 74 cm (20×29″) PressCenter Deb Ezvnsp Ugwtokekl AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Dkob Ezvsud U D Isnkel Gate-fold unit Available: at short term

Condition: used, Rhin-O-Tuff Wire-O-Punch PAL-14 PIKS-A-LIFT Paper Picker Modul Die-Cutter HD7700 Lay-Down Unit Tools: 3:1 round 3:1 square 2:1 square Dkob Ezvstvhvnenkjl

Year of construction: 2006, Condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 Dkjboh Nrh Ue Ezvnkjl The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Year of construction: 2002, 1,96 Mio. cuts approx. good working condition Dob Eevn I E Sozvnkskl availalbe March/April 2025

Condition: used, Year of construction: 2004, 84,5 Mio prints approx. Format: 370×520 mm (14×20″) ClassicCenter Dkeb Esv Idddezvnkjl Alcolor Autoplate Technotrans cooling Streamfeeder Autom. blanket wash-up device Low-pile delivery Powder sprayer Available: at short term

Condition: used, Year of construction: 2000, 75 Mio. imprints approx. 370×520 mm (14×20″) CP-Tronic Alcolor with Technotranscooling, Autoplate Streamfeeder, Dkob Esv D Izfozvnkel Autom. ink roller washer, Autom. blanket washer, Autom. impressioncylinder washer, Low-pile delivery Powder sprayer Available: at short term

Condition: used, Year of construction: 1998, Stahl Folder TI 52-4 Fi Format: 52 x 84 cm Djb Ezvsv S Azpsnkjkl FI52 - Flat pile feeder available at short notice

Condition: used, Year of construction: 2011, only approx. 91,500 cuts Maximum cutting width: 76 cm Maximum paper length: 76 cm Dimensions: Length 1900 mm, width 1400 mm, height 1450 mm Weight: 1000 kg Cutting speed: 42 cuts per minute Dkjb Eov Tztaszvnkol comes from a school Top condition - like new

Condition: used, Electric table punch for plastic effect binding Triggered by foot pedal, 220V connection Incl. manual binding device Working width: 320 mm Manufacturer: probably Renz- unfortunately no type plate available anymore Can be inspected on site in production Dsb Ezjv Sbl Hovnkskl available at short notice

Condition: used, Year of construction: 2024, Polar N115 Accessories: Dksb Ezvev I Tzfjnkel Resopal air tables 100 x 100 cm, left and right Knife changing tool 2 HSS knives on-board tooling

Condition: used, Year of construction: 2007, Laminating machine Foliant Gemini 400 S Technical data: Working width: 380 mm Sheets (B3) per hour: 1200 / 1800 (400 GA) Format max. 38 x 58 cm Format min. 32 x 25 cm Machine dimensions: 700 x 1170 x 800 mm Djb Ezvnovt T Ipjkjkl

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm Dob Ezeh I Ahxevnkokl with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: used, Year of construction: 2007, Format: max. 540x1000mm; min. 100x148mm Paper weight: 40-250g/sqm Loading capacity: 55mm Output: max. 45,000 cycles/h compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Dkeb Ezvnjup Ut Ujksl Horizon AFC-564AKT, Horizon AFC-566AKT Horizon AFC-566F, Horizon AFC-566FKT Weight: 518kg good working condition available at short notice

Condition: used, Year of construction: 2016, Total prints: 3,768,802 Color: 3,316,984 B/W: 451,818 Machine can still be viewed in production and prints excellent quality Dkob Ezvnswcfd Hokel Available at short notice