Condition: used, Manufacturer: EuroProjet – Studio 54 Model : Armadio Oasis 1400 Type : Refrigerated cabinet Cgob E Ilsv I U R Ujugot Material : 304 stainless steel Capacity : 1315 L Working temperature: +2°/+8°C Digital temperature control Inside dimensions : W 54 x H 150 x D 70 cm Outside dimensions : W 145 x H 205 x D 85 cm Weight: 300 kg

Condition: used, Make by : Tsuruta Electric : TBX-25K (06017) Cgsb E Ilsdc A Rreugot

Condition: excellent (used), Year of construction: 1996, operating hours: 250 h, Functionality: fully functional, We have a 2000 KVA container generator for sale. Optionally 400/230 V (50 Hz) or 10 kV (+/- 5%) (50 Hz) Fully installed in two soundproof 40' HC containers. Suitable and intended for multi-layer installation. Dimensions: (L x W x H) 12020 x 2500 x 5800 mm Weight: approx. 33 t + 11 t Engine: MTU 16v396 TB 34D Generator: A.v. Kaick DIDBN 130/125 h/4 2000 KVA Generator Engine and generator completely mounted on a base frame and connected via a flexible coupling. Cooling system: Separate table cooler installed as a dual-circuit cooler in the upper container, including temperature control, connecting lines (stainless steel cooling water lines with shut-off valves for each line), circulation pumps, control valves, etc. for safe operation. Tank system: 4000-liter tank system installed in the upper container, including system-specific accessories and complete piping. Air supply and exhaust system: Soundproof baffles within the air supply and exhaust chambers in the container. Air supply and exhaust openings each equipped with appropriate weather protection grilles, motor-operated blinds in the container that open automatically when the generator is in operation. Exhaust system: Insulated exhaust ducts within the container lead vertically from the container via silencers through the upper container, discharging the exhaust gases through the container roof. Switchgear: Medium/low-voltage switchgear for fully automatic emergency power operation!!! Optionally 400/230 V or 10 kV (+/-5%) Fully automatic machine monitoring with control for power failure detection, automatic start-up, and emergency power takeover. Upon power recovery, the system automatically switches back to the mains supply. In the low-voltage range, parallel operation with the mains/resynchronization is possible. Control for external mains switch - optionally 10 kV or 400/230 V Low-voltage switchgear equipped with: 3200 A generator switch (400/230 V) Medium-voltage switchgear equipped with: 115 A generator switch (10 kV) Technical data of the type-tested medium-voltage switchgear Panel type: ZS8 Rated voltage: 12 kV Operating voltage: 10 kV etc. Cgob E Iljwa Tg Dsuget

Condition: excellent (used), Year of construction: 1996, pressure: 13 bar, operating pressure: 13 bar, 1 used steam boiler ----- Make: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 53 m² Csb Ejv I Rpas Ilugjgt Output: 3,200 kg/h Max. operating pressure: 13.00 bar Increased test pressure: 24.05 bar Water capacity at low water level approx.: 2,650 l Water capacity when full approx.: 3,770 l Year of construction: 1996 Equipped with a Weishaupt gas/oil combi burner, gas control system, control cabinet mounted on the boiler body, feedwater pump, and the existing coarse and fine valves.

Condition: new, Year of construction: 2023, Functionality: fully functional, Description: Cjb E Ilev Hamxjugsgt Generator emergency power generator, manufacturer: Emean, type: DAGFS 50, 50 kW, 50 Hz, 400 volts, 3-phase, 4-cylinder, water-cooled, IP23, year of manufacture: 2023, each with 3 x 16 amp sockets (blue) and 1 x 32 amp socket (red), dimensions: 2.30 m x 0.95 m x 1.25 m, weight: approx. 900 kg, new, unused, rated output: 50 kVA, continuous output max. 40 kVA, standby output: 55 kVA / 44 kW, rated current 33 amps, voltage: 400/230 volts, 50 Hz, 230 volts, 50 Hz, fuel consumption at 75% capacity: approx. 11 liters/h, fuel consumption in standby mode approx. 4 liters Liters/h, drive motor: 4-cylinder RICARDO in-line diesel engine, engine power at 1500 rpm: 45 kW, engine power at 1800 rpm: 55 kW, displacement: 1500 cc, fuel tank capacity: 99 liters, simple and compact design with sound-insulated metal housing, fork recesses for easy and safe forklift transport, 3 x CEE 16 Amp sockets (3-pin, 230 volts), 1 x CEE socket (5-pin, 400 volts), terminals for cable power connections for external devices, e.g., construction site power distribution boards, 2 x 12-volt starter batteries for 24-volt starters. The generator has an AVR control and is equipped with a battery. A starter kit consisting of an oil filter, air filter, and diesel filter is also available.

Condition: used, Subject of this sale are two steam generators WIMA 500 and WIMA 400 Steam generator WIMA 500 (shown in the photos) - specifications: Steam capacity 500 kg Working pressure 10 bar Burner - fuel oil Speck feed pump WIMA 400 steam generator - specifications: Steam capacity 400 kg Working pressure 10 bar Cob E Ijuabwgolugogt Burner - fuel oil Speck feed pump

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, Desktop Robot VR3403F - Heavy duty version Item No. 505945 +Startbox for JR-3000 Robot Series Item No. 505832 +TeachBox II for JR-3000 Robot Series Item No. 508351 +Enclosure Dispensing Robots Dispensing robots enable automated and controlled dispensing of materials onto a workpiece. With our industrial robots, the dispensing process can be controlled reliably and in an extremely repeatable manner. The programming of the application is easy to setup and can be customized to the need. The operation of the dispensing robot is easy and user-friendly This is the heavy duty version of the VR3403F. Its load capacity for the tool is 15 kg. The workpiece may have a maximum weight of 20 kg. The VR3400F model has a working range of 400 x 400 mm. Programming of the dispensing routine can be easily done with the Teachbox, supplied with the robot, or software for Microsoft® Windows® operating system. Operation: Our cartesian dispensing robots automatically interpolate lines and curves in all axes. The powerful and user-friendly software provides clear user guidance for quick and easy program creation. This means that the device is ready for use within a few minutes. Connection options: The system is equipped with a (16 x input / 16 x output I/O signal interface for controlling external systems. Programming: Programming is achieved by means of a teach box (13-line display, illuminated). Perfect dispensing through continuous path movements. Optionally Windows® and CAD software for entering coordinates. Features: Points, lines, arcs and circles Seals, castings, fillings and insulations Perfect dispensing due to repeat accuracy of max. 0.01 mm deviation Computer skills not required Fast, accurate and reliable Technical data: Speed PTP: X-axis 900 mm/s; Y axis 900 mm/s; Z axis 400 mm/s; R axis 900 °/s CP speed: 850 mm/s Combination of X/Y/Z movements Repeat accuracy: ± 0.007 mm per axis Memory capacity: Max. 32,000 points via system card Control: PTP (point to point) and CP (continuous motion) Interpolation: XYZ axes simultaneous (CP) 3D line interpolation Programming: Remote & Manual Data Input (MDI) PLC: 100 programs, 1000 steps for each program I/O signals: SYSTEM I/O 16 input and 16 output signals; USER I/O-1 (optional) 8 input and 8 output signals (including 4 relays); I/O-MT (optional): can also control up to two external motors External interfaces: RS-232C (3 ch) for external device; USB for storing and loading programs or backup; Fieldbus CC Link; DeviceNet; Profi bus (optional); LAN for PoE Industrial Hub Connections Relative humidity: 35-85% without condensation Color: green Drive: stepper Cgjb E Iswanafjlugjt Installation: Table top robot Enclosure For occupational safety reasons, our dispensing robots may only be operated within suitable protective equipment. Our protective bonnets are fixed, separating protective devices that form a physical barrier between man and machine. Our protective bonnets fulfill all the requirements of the Machinery Directive. This means that nothing stands in the way of an EC declaration of conformity (CE marking). Finding the right safety guard depends on many different factors: Firstly, the size of the dispensing robot and its working area are decisive. The height of the bonnet depends on which structure you want to use on the robot head. Number of axis: 3 Payload table: 20 Payload tool: 15 Work area: 400 x 400 x 150

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: RRK 640-850, Boiler RRK 640-850 (rated output 800 kW for fuel with water content W40), Cgsbswbr Ipj E Iluget max. design temperature 110 °C, max. operating temperature 105 °C, max. design pressure 6 bar, operating pressure 5 bar, medium water Boiler block with water-cooled walls, horizontal 3-pass heat exchanger with integrated safety heat exchanger, including RECI flue gas recirculation, automatic high-speed heat exchanger cleaning, flue gas fan with frequency converter, MZA multicyclone Fireplace with sliding grate SRF 640-850 for burning wood chips according to EN 14961 or ÖNORM M7133, max. water content by weight 50% (M50, "W50"), max. ash content 7% (A7.0, "A5") Combustion chamber with vacuum control, sliding grate with movable rows of grates for linear displacement of fuel. Fans for primary and secondary combustion air supply. Including de-ashing of the boiler with a hydraulic slide and ash removal. Boiler filling using a screw conveyor SBA TS system Filling screw conveyor with motor, backfire port flap

Condition: used, Year of construction: 2018, Functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Csb E Ilujv Uz Efjgsgt Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, 2 used steam boilers ----- Manufacturer: LOOS International Type: U-HD 500 Heating surface approx.: 9 m² Max. output: 500 kg/h Max. permissible operating pressure: 13.00 bar Increased test pressure: 24.05 bar Full water capacity approx.: 770 l Year of manufacture: 2007 Cgob Eov I Rigj Ilugjt CE mark: 0036 Equipped with Weishaupt gas burner WG40N/1-A, ZM-LN, 55-550 kW, gas control system, Eco control cabinet with touch panel, feedwater pump and the existing coarse and fine valves

Year of construction: 2022, Condition: new, rated capacity max. 8,1 kVA capacity in kVA bei 400 V - 7,5 kVA rated capacity bei 230 V - 6,1 kVA power fuel Diesel 0 tank capacity 15 l 0 11 KW cubic capacity 498 ccm weight of the machine ca. 0,165 t Cjbevw Dubo E Ilugogt dimensions of the machine ca. 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load,

Condition: used, The object of the sale is four steam generators: the Certuss 200, Certuss 400, Certuss 500 and Certuss 1800. Certuss 200 steam generator specification: Capacity 200 kg, Working pressure 10 bar, Oil burner, Speck feed pump. Certuss 400 steam generator - specifications: Steam capacity 400 kg, Burner - fuel oil, Working pressure - 10 bar, Cjb E Ilueuacgvegjgt Speck feed pump, New integrated SUW water preparation module Certuss 500 steam generator - specifications: Capacity 500 kg, Working pressure 10 bar, Burner - gas, Year of production 2004. Certuss 1800 steam generator - specifications: Capacity 1800 kg, Working pressure 16 bar, Burner - fuel oil, Speck feed pump.

Year of construction: 2021, Condition: like new (used), 1.Introduction: 1. This document describes the functional requirements regarding a; 1.1. LC tray degassing chamber 1.2. LC tray degassing chamber is a (controlled vacuum chamber) in which an aluminum tray containing LC liquid is degassed in a vacuum environment during a period of time (i.e. entrapped air is evacuated) Vacuum profiles; 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile 2.Interior; 2.1.Stainless steel (aluminum) polished process chamber (inside) 2.1.1. Leak rate to be discussed 2.2. LC-tray (adaptation) drawer to easily (un-)load the LC-tray (no shock/shake movement allowed), see Section 2 LC-tray dimensions and appendix 1 2.3. LC tray must be level (waterpas) at all times to prevent LC spillage 2.4.Chamber must be easily/quickly accessible for cleaning and/or LC tray (un)loading 2.5.Chamber inside must be polished for easy cleaning and prevention of Cebjwam Sae E Ilugegt contamination and/or moisture collection 2.6.Monitoring (window) possibility of the degassing cycle i.e. monitoring LC liquid surface behavior in the LC tray 2.7.No process contamination caused by chamber material (-manufacturing)

Condition: used, Year of construction: 1981, For further details see type plate (image) Cgeb E Iluewa Apzogst

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 7533569600009, power: 1,350 kW (1,835.49 HP), operating pressure: 6 bar, for sale gas boiler Vitoplex 100, with the burner Weisshaupt. excellent condition video call possible Csbewcbw Ae E Ilugegt

Condition: excellent (used), Functionality: fully functional, continuous power (apparent): 1,400 kVA, type of cooling: water, SDMO powered by mtu 12V4000 diesel engine. Coupled to Brushless Roy-Somer alternator. Power 1400 kva emergency, 3000 hours running only Comes with -engine & alternator on frame, complete control panel, radiator, and silencer. Emergency energy backup gen-set is in excellent condition. Cgjb E Ilev U Drheugjt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Csb E Ioqqhuyolugogt Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. The container also contains a 2,000 L tank for the initial diesel supply. The generators are regularly tested under load.

Year of construction: 2002, Condition: excellent (used), Boiler used Manufacturer: Viessmann Type: Vitoplex300 SX1 Year of manufacture: 2002 Nominal heat output: 1750kw Operating overpressure: 6 bar Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. Cob Eshl Sagj Ilugogt The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: repair required (used), color: green, output voltage: 690 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: 0852773/01, The generator is as shown in the photos. It is offered on an "as is" basis, so there are no warranties or returns. For more details, please contact us. Technical Features: Cgsb Eswbhi As Iluget Serial Number: 0852773/01 Machine ID: P05E388280 Frame/Core: LVSI804W2 KVA Base Rate (BR): 3555 KW Base Rate (BR): 2844 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Amperage Base Rate (BR): 2974.6 Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 75V Excitation Amperage: 3.70 Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding (Stator Connection): STAR

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive Cob E Iljv Hxw Aeugsgt -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 stroke: 60 mm -Shaft: Ø 20 mm -Number: 6x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece

Condition: new, Year of construction: 2023, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Everything that is required for commissioning is included. (without fuel) Available in stock Technical specifications Engine : Fawde Kraft series 4DW92-35D, 4 cylinders Generator: Newpower NW/N32 Continuous power: 24 kW / 30 kVA Maximum power: 26 kW / 33 kVA water cooled Connection: 1x5pole 32A -, 1x3P 16A -, 1x220V chocolate sockets, circuit breaker, optional automatic transfer switch.). Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap AMF8 Year of construction: 2021 Dimensions (LxWxH): 2000x 930x1250mm Weight: 930 kg Diesel tank: 95 L 100% load l/h 7.3 75% load l/h 5.1 50% load l/h 3.4 Network monitoring, soundproof Ready for immediate use. Cgjbsh R Tt Aj E Ilugst additional costs; Automatic transfer desk: €500

Condition: repair required (used), machine/vehicle number: MT31556, overall weight: 1,780 kg, color: grey, output current: 981 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power (apparent): 680 kVA, motor speed: 1,500 rpm, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The product was serviced many years ago and needs inspection before commissioning. For more details, please contact us. Specifications: Generator type: MJB 355 MA4 Code: MJB3532G067M0 Weight: 1780 kg Phases: 3 Serial number: MT31556 Insulation class: H Degree of protection: IP 23 Power factor (P.F.): 0.8 S1 CONTINUOUS DUTY (at an ambient temperature of 40°C): 680 kVA Voltage: 400 V (Y-star configuration) Current: 981 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 660 kVA Voltage: 220 V (Y star configuration) Current: 1732 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 775 kVA Voltage: 440 V (Y star configuration) Current: 1017 A Frequency: 60 Hz Cgebot Hvfts E Iluget Speed: 1800 rpm Excitation voltage: 24.4 V Excitation current: 3.7 A STAND BY DUTY (at an ambient temperature of 27°C): 750 kVA Voltage: 400 V (Y-star configuration) Current: 984 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 28.6 V Excitation current: 4.2 A 855 kVA Voltage: 440 V (Y star configuration) Current: 1122 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 25 V Excitation current: 3.8 A Standards and Certifications: Standards: EN 60034-1, IEC 60034-1 CE Mark

Condition: new, Continuous power: 60 kW / 75 kVA Engine: Fawde 4110/125Z-09D, 4 cylinder, water-cooled Connection: 1x32A, 1x64A 1x220V Sockets or circuit breakers, optional 125A socket Csboh R Tm Is E Ilugegt Frequency: 50Hz Voltage: 400/230V including electronic speed control, AVR, battery charger, preheater Comap AMF8 control with generator network grid feed in RCD protection

Condition: repair required (used), output voltage: 400 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: A16H328962, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. For more details, please contact us. Technical Specifications: Serial Number: A16H328962 Cgjb E Ilotynqpsugjt Frame/Core: HCG634H2 KVA Base Rate (BR): 731 KW Base Rate (BR): 584.8 Amperage Base Rate (BR): 1055.1 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 400V Phases: 3 Power Factor (PF): 0.80 Service: Continuous Excitation Voltage: 58 Excitation Amperage: 3.3 Ambient Temperature: 40°C Temperature rise: 105°C Thermal Classification: 180°C Protection Class: IP23 Insulation Class: H Stator Winding: 312 Stator Connection: Star

Condition: repair required (used), machine/vehicle number: 0855555/01, color: green, output voltage: 690 V, output frequency: 50 Hz, motor speed: 1,500 rpm, type of cooling: air, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The alternator has cracks on the rear crankcase and requires inspection before use. For more details, please contact us. Technical Specifications: Serial Number: 0855555/01 Machine ID: P08J155680 Frame/Core: LVS1804S2 KVA Base Rate (BR): 2790 KW Base Rate (BR): 2232 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Base Rate Amperage (BR): 2334.5A Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 68V Excitation Amperage: 3.60A Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Csb Eetu Hypo Ilugegt Insulation Class: Class H Stator Winding: 65 Stator Connection: Star