Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Dsdpfx Asrivv Eofvswd Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 2008, machine/vehicle number: PAL57, Used SBC palletizer - 12000 BPHTechnical Specifications & Performance DataThis conventional automatic palletizer is engineered for efficient end-of-line handling of wrap-around cartons, packs, and cases. Manufactured by Sbc in 2008, it delivers reliable performance for industrial packaging and beverage production environments. Designed for EPAL pallets, it ensures stable stacking and optimized warehouse logistics within a used bottling line or second hand packaging setup.Manufacturer: SbcYear: 2008Nominal capacity: up to 3 layers per minuteMaximum speed: 12000 (on 3x2 pattern) Pallet format: EPAL 800x1200 mmWorking height (H): 750 mmCompressed air: 6 barApplication: palletizing wrap-around cartons, packs/casesContainer materials handled: Aluminum cans, Glass bottles, PET bottlesAutomatic layer pad inserter: Yes (automatic layer sheet application)Advanced Automation & Control SystemsThe palletizer features a conventional automatic architecture aimed at consistent layer formation and stable load building. An automatic layer pad inserter enhances load integrity, especially for mixed-height or fragile carton configurations. Operator-friendly controls support format changeovers and routine adjustments, helping reduce downtime and maintain throughput in high-demand industrial packaging operations.Conventional automatic layer formation and placementAutomatic layer pad insertion for improved pallet stabilityOperator control panel for setup and adjustmentsDesigned for safe, repeatable stacking patternsProduction Line Integration CapabilitiesOptimized for integration downstream of wrap-around case packers and upstream of pallet wrapping systems, this palletizer fits easily into beverage production and broader packaging machinery layouts. It supports standard EPAL 800x1200 mm pallets and is suitable for handling cartons that contain PET, glass, or aluminum can products.Inline or standalone operation with conveyor interfacesIdeal downstream of wrap-around case packersCompatible with pallet wrappers and stretch hoodersSuitable for packs/cases across PET, Glass, and Aluminum formatsMachine Condition & Maintenance HistoryThe machine is ready for operation and supplied with compatible spare parts. It has been overhauled and is covered by a 6-month warranty, reflecting a dependable second hand asset for a used bottling line or industrial packaging application. It is offered in overhauled condition, sold as seen and approved, to ensure confidence in performance and mechanical integrity.Ready for operationOverhauled and guaranteed6-month warrantyProvided with compatible spare partsOperational Performance & VersatilityWith a nominal capacity up to 3 layers per minute, this palletizer is suitable for a wide range of beverage and food product categories packaged in cartons or cases. Its compa... Djdpfxs Adtzds Afvjwd

Condition: used, Year of construction: 2006, machine/vehicle number: PAL54, Used KOSME PALPACK-PS-DS palletizer 10800 BPHTechnical Specifications & Performance DataThis Kosme PALPACK-PS-DS palletizer is engineered for high-efficiency end-of-line operations in beverage production and industrial packaging. Designed to palletize products in shrink-wrap or on tray, it offers reliable performance for second hand and used bottling line upgrades. Manufactured in 2006, it combines robust mechanics with Siemens automation for dependable, repeatable results.Manufacturer: KosmeModel: PALPACK-PS-DSYear: 2006Maximum speed: up to 10,800 bottles per hour (3x2 pattern)Supported pallets: Eur-Epal 800x1200 mm; 1000x1200 mmWork height (infeed level): 900 mmDimensions: length approx. 8512 mm; width approx. 6433 mmTotal weight: 4500 kgInstalled power: 10.16 kWElectrical supply: 400 V, 3-phase, 50 HzPneumatic supply: 6 barAutomation: Siemens S7 PLC with Siemens Simatic HMILayer pad inserter: AutomaticOperation type: Conventional automatic, low-level handlingAdvanced Automation & Control SystemsControl is built around a Siemens S7 PLC paired with a Siemens Simatic HMI for clear operator guidance, diagnostics, and parameter management. The automation architecture supports high uptime and consistent pallet patterns with minimal manual intervention. Integrated recipe control and guided adjustments streamline format changes and ensure repeatable quality across different pack sizes and container materials. Electrical specifications are 400 V, 3-phase, 50 Hz with an installed power of 10.16 kW, suitable for most beverage production facilities.Production Line Integration CapabilitiesThe PALPACK-PS-DS interfaces seamlessly with upstream shrink wrappers and tray packers, making it ideal for complete bottling and packaging lines. It handles packs and cases formed in wrap or on tray and is designed for PET, glass, and aluminum can containers. With low-level infeed at 900 mm, the machine integrates easily with existing conveyor systems and allows fast adjustments for different pack configurations and pallet formats (EPAL 800x1200 and 1000x1200 mm).Machine Condition & Maintenance HistoryThis unit is refurbished, guaranteed, and ready for immediate operation. It is offered with a 6-month warranty and supplied with compatible spare parts, ensuring smooth commissioning and reliable performance in a second hand or used bottling line environment.Operational Performance & VersatilityOptimized for high-performance industrial packaging, the PALPACK-PS-DS palletizes shrink-wrapped bundles and tray packs across a wide product mix. Typical applications include water (still and sparkling), soft drinks, beer, wine, spirits, milk, and oil, as well as food conserves. The automatic layer pad inserter increases stability and protection during pallet build-up, while Siemens-driven motion and control enhance placement accuracy and repeatability at speeds up to 10,800 bph in a 3x2 patt... Dsdpfx Afe Adtzksvjwd

Condition: used, Haver & Boecker SWA/MECII-20 Loading System Haver & Boecker SWA/MECII-20 bulk loading system with weighing scale for loading trucks or wagons with bulk materials. Suitable for free-flowing, non-dusty bulk materials. Description Brand: Haver & Boecker Type: SWA/MECII-20 Year of construction: 2003 Temperature range: -10 °C / 40 °C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg, Min 10 kg Dimensions: Section I: L2.43 x W187 x H310 Section II: L240 x W240 x H310 Haver net weighing system with frame Dwodpfx Asg Sfa Tofved Weighing and discharge electronics MEC II-20 for controlling weighing and/or machine functions Advantages • High level of user comfort • Simple programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Operator terminal BT 15 For automatic remote adjustment of product types, including motorized adjustment of bag length/width parameters. More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2003, machine/vehicle number: PAL61, Used TMG Strio 2S1 palletizer 14000 BPHTechnical Specifications & Performance DataThe TMG Strio 2S1 Palletizer is a robust solution for end-of-line packaging in beverage production and industrial packaging environments. Designed to handle multiple container materials and pack styles, it delivers reliable throughput for used bottling line applications and second hand packaging upgrades. Manufactured by TMG in 2003, this palletizer supports wrap-around, tray, and film packages, making it a versatile choice for high-mix operations.Manufacturer: TMGModel: Strio 2S1Year: 2003Production speed: up to 14,000 bottles per hourPack configurations: wrap-around, tray, filmContainer materials: PET, Glass, Aluminum (cans)Current formats: 0.33L, 0.5L, 0.75L, 1.0LSupported pallets: Eur-Epal 800x1200 mmWorking height (conveyor level): 750 mmElectrical supply: 400 V, 3-phase + TCompressed air: 6 barControl: Siemens PLC with HMI S7-300Auxiliary system: Automatic layer-pad inserterAdvanced Automation & Control SystemsEngineered for dependable automation, the palletizer features a Siemens PLC and an operator-friendly HMI based on the S7-300 platform. This control architecture ensures precise motion coordination, consistent layer formation, and straightforward diagnostics. Recipe-based operation enables quick selection of formats and pack patterns, while the automatic layer-pad inserter enhances load stability and minimizes manual intervention. The 400 V, 3-phase power supply supports industrial duty cycles in demanding beverage production environments.Production Line Integration CapabilitiesThe TMG Strio 2S1 integrates smoothly into existing bottling equipment and packaging machinery. It can operate inline with shrink wrappers, wrap-around case packers, and tray packers, or as a standalone palletizing cell. Its compatibility with PET, glass, and aluminum containers across 0.33L to 1.0L formats provides multi-product flexibility for water, CSD, beer, wine, milk, oil, and spirits. Standard pallet handling for Eur-Epal 800x1200 mm simplifies logistics and downstream pallet wrapping.Machine Condition & Maintenance HistoryAvailable used and ready for operation. The unit can be supplied overhauled and guaranteed, or on an as-is basis depending on production needs. This flexibility supports rapid commissioning for second hand line expansions or phased maintenance strategies.Operational Performance & VersatilityBuilt for high uptime and consistent performance, the Strio 2S1 manages wrap-around, tray, and film-packed units with accurate layer formation. The automatic layer-pad inserter optimizes load stability for transport. Its broad container material compatibility makes it suitable for beverage production, including still and sparkling water, soft drinks, beer, wine, milk, oil, and spirits, as well as mixed-format industrial packaging.Installation Requirements & Site PreparationThe machine requir... Dodpfx Afezcf Nbjvewd

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Dwodpey I Ac Dofx Afvjd

Condition: used, Year of construction: 2006, machine/vehicle number: M269, Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph This Monoblock  offers a bottling unit manufactured by Bertolaso in 2006. Although designed to operate at a maximum speed of 2000 bottles per hour (BPH), operators have never used it, leaving it in very good condition. Furthermore, the Olimpia 12/12/1 monoblock efficiently handles glass containers, allowing for both 0.75 and 1.5-liter formats, and performs especially well for bottling still wine and beer. Rinsing System of the Used Filling Monoblock OLIMPIA 12/12/1 The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph achieves rinsing through a gripper system equipped with 12 clamps for glass containers. In fact, this system ensures uniform container cleaning before filling. Moreover, its single-type treatment prepares containers efficiently, maintaining the final product’s integrity. This configuration controls the rinsing flow stably, achieving efficiency even in high-intensity work environments. Filling Technology: Gravity Valves with Light Depression The Monoblock BERTOLASO integrates 12 valves that fill containers using gravity, supported by light depression, ensuring precise liquid dosage. Consequently, this method minimizes air presence in the container, which helps preserve product quality and increases storage stability for wine and beer. Dwedovgvfkopfx Afved Fixed Nozzles for Consistent Filling Additionally, the fixed nozzles of the Filling Monoblock BERTOLASO maintain stable, continuous filling, ensuring homogeneous liquid distribution in containers. As a result, this design enables the monoblock to handle high volumes efficiently, therefore reducing product waste and optimizing production processes. Operational Condition and Storage State The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph remains in storage, having never been activated. Thus, this storage state keeps all components in pristine condition, so they are ready for immediate operation. Therefore, it serves as an ideal solution for those seeking a ready-to-use bottling monoblock without wear or restoration requirements. Production Advantages of the Used Filling Monoblock OLIMPIA 12/12/1 The Monoblock BERTOLASO adapts especially well to production lines requiring flexibility for different container formats and bottled products. In particular, its ability to manage various container sizes (0.75 L and 1.5 L) expands its applications, making it a versatile choice. Finally, the machine’s overall design enhances efficiency, ensuring high performance during production runs.

Year of construction: 2000, condition: ready for operation (used), A hot beverage filling and capping machine MBF is available. Filling stations: 35, capping heads: 4, bottle type: VdF, bottle volume: 1000ml/500ml, max. filling temperature: 95°C, screw cap: MCA aluminum standard, cap dimensions X/Y: 28mm/15mm, filling capacity: 7000bottles/h, bottle height (1l): 306.5mm, machine dimensions X/Y/Z: approx. 3400mm/2300mm/2600mm. Documentation available. On-site inspection is possible. Dwedjyhgn Ajpfx Afvod

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER Djdpfx Aotraaaefvjwd • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Year of construction: 2012, condition: used, machine/vehicle number: HO2, Used Tetra Pak TA25 6.3T aseptic homogenizerTechnical Specifications & Performance DataThis aseptic homogenizer is engineered for high-pressure product homogenization in beverage and food processing environments. Manufactured by Tetra Pak, the TA25 series is widely recognized for dependable performance and hygienic design. The offered unit corresponds to a TA25 configuration with an identified 6.3T variant and a pressure class indicated as 250 BAR. It is CE marked and built for applications requiring aseptic processing integrity. A preparation and upgrade package for aseptic operation is included, ensuring the machine is set up for sterile production workflows in industrial packaging and beverage production contexts.Manufacturer: Tetra PakModel: TA25Variant/Configuration: 6.3TPressure rating: 250 BARYear of manufacture: 2012Compliance: CE markedMachine type: Aseptic high-pressure homogenizerIncluded scope: Preparation/upgrading to aseptic homogenizerAdvanced Automation & Control SystemsDesigned for reliable process control, the TA25 platform supports precise pressure regulation and consistent homogenization performance. The machine features integrated operator controls for start-up, setpoint management, and safety interlocks. Its aseptic configuration enables controlled product handling, facilitating consistent quality and repeatability across production runs. The control interface is optimized for quick parameter adjustments and routine operations, helping reduce downtime and enhancing overall line efficiency in second hand and used bottling line projects.Production Line Integration CapabilitiesThis homogenizer integrates seamlessly into processing lines upstream of fillers in beverage production and industrial packaging environments. It is suitable for inline operation with pasteurization, sterilization, and CIP systems, and can be adapted to both standalone and fully integrated configurations. The aseptic upgrade package supports compatibility with aseptic tanks, valves, and downstream aseptic filling equipment handling PET or glass containers on bottling equipment. Its compact footprint and service access points facilitate installation into existing used bottling line layouts.Machine Condition & Maintenance HistoryThe unit is offered as a second hand machine in ready-for-operation status. The inclusion of preparation and upgrading to an aseptic homogenizer configuration supports swift commissioning and alignment with hygienic production requirements. Routine maintenance practices for this model typically include seal inspection, pump and valve checks, pressure calibration, and verification of aseptic barrier integrity.Operational Performance & VersatilityThe TA25 series is known for stable pressure delivery and efficient particle size reduction, contributing to product stability, mouthfeel, and shelf-life in beverage production. Its aseptic-ready design supports extended run times and reduced contamination risk, making it a strong fit for high-demand industrial packaging lines. The 250 BAR rating enables robust homogenization across a wide range ... Dwjdezd Ulyspfx Afvod

Condition: used, Year of construction: 2021, operating hours: 400 h, machine/vehicle number: M345, Used SRAML filling monoblock 2400 BPH for glass - Year 2021Technical Specifications & Performance DataThis Sraml Filling Monoblock model I9P10VX is a compact, second hand bottling solution designed for efficient beverage production and industrial packaging applications. Engineered for glass bottle handling, it combines rinsing, filling, and capping in a single, space-saving frame. It is ideal for producers seeking reliable bottling equipment within a used bottling line or as a standalone upgrade to existing packaging machinery.Manufacturer: SramlModel: I9P10VXYear of manufacture: 2021Production speed: up to 2,400 bph at 0.25L; up to 1,500 bph at 0.75LContainer types: Glass bottlesWorked formats: 0.25L, 0.75LRinser: 9 grippers; 1 treatment (rinsing)Filler: 10 valves; fixed nozzlesCapper: 1 head; ROPP aluminum screw caps, 28x15.4mmDimensions (L x W x H): 2792 mm x 1258 mm x 2024 mmWeight: 1800 kgElectrical supply: 400 V, 50 HzInstalled power: 3 kWAdvanced Automation & Control SystemsThe monoblock integrates synchronized rinsing, filling, and capping turrets for stable operation and consistent bottle handling. The filling system with fixed nozzles provides precise, low-turbulence filling suitable for quality-sensitive products. Standard machine protections typical of modern bottling equipment help ensure operator safety and dependable uptime. The CE-marked design underlines compliance with European safety and hygiene directives for beverage production.Production Line Integration CapabilitiesThis unit can operate as a standalone filling monoblock or integrate seamlessly within a broader used bottling line. It is supplied with compatible Sraml ancillary equipment and conveyors for smooth line connectivity and accumulation management. Format changeovers support 0.25L and 0.75L glass bottles, helping producers switch SKUs with minimal downtime.Sraml RT800 rotating tableSraml RM6 rinsing medium unit with pump and heater (powered from the monoblock); 400V; 7 kW; 80 kgSraml BT1.5 bottle tilter; 400V; 1.1 kW; 350 kgSraml PT2000 packing table; 130 kgConveyors to connectMachine Condition & Maintenance HistoryManufactured in 2021, this filling monoblock has been lightly used for approximately three production seasons and records around 400 operating hours. It has been placed in dry storage since August 2024. Overall, it presents as a well-kept second hand machine suitable for rapid recommissioning in beverage production environments.Operational Performance & VersatilityDesigned for glass bottle handling, the system has processed apple juice and, thanks to its configuration, can be adapted to various still beverages. The ROPP capping head supports 28x15.4 mm aluminum screw closures common in premium juice and specialty drink applications. The 9-gripper rinser and 10-valve filler pairing provide balanced throughput a... Dwsdpfx Aszrgrhjfvod

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Dsdpswiu Rvsfx Afvewd Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: used, Weger filling machine, weighing machine, vibrating chute Entirely made of stainless steel Includes a small weighing scale up to 6 kg Can optionally be expanded to handle weights up to +/- 50 kg (operation of load cells unknown) Complete with weighing control system Dwsdjzh Nn Rspfx Afvod See our other listings.

Condition: used, Year of construction: 1998, machine/vehicle number: PX15, Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes the mixed product before filling. Sanitizing transfer pump moves the sanitizing solution efficiently. Dwsdov Ai Hyjpfx Afvjd Control panel houses all operational and monitoring controls. Work Cycle of the Used Premix PARMATEC Drinkmix The Used Premix PARMATEC Drinkmix 12000 l/h follows a structured four-step process that ensures accurate proportioning and thorough mixing of ingredients. DeaerationFirst, the system removes oxygen from the water to facilitate carbonation. It does this by injecting a precise amount of CO₂ before the water enters the main tank. Additionally, a specially designed nozzle creates a “rain effect” that enhances oxygen separation. As a result, the system achieves optimal preparation for the next stage. DosingNext, the deaerated water and syrup pass through micrometric valves that regulate their flow with exceptional accuracy. Moreover, the machine displays these flow rates on dedicated graduated indicators, allowing operators to monitor the process in real time. This phase ensures that the final premix meets the beverage’s exact specifications. Final Carbonation and MixingAt this stage, the system injects carbon dioxide in the first section of the heat exchanger coil. Then, a micrometric valve controls the amount of CO₂ while a flow meter displays the exac...

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio Suction Unit CS1 – versatile suction and blowing device A GEWA Chio Suction Unit CS1 is for sale. The new price was approximately €1,750. This device is ideal for sucking in or blowing out packaging chips (filling material) into or out of cardboard boxes. It facilitates the quick filling and emptying of packaging and is ideal for shipping, warehousing, and logistics. Features: For sucking in and blowing out packaging chips Suitable for cardboard boxes and other packaging containers Robust design Ideal for shipping and warehousing operations Dwsdpfxoxiv Ero Afvsd The scope of delivery and condition correspond to the photos shown.

Condition: like new (used), ZACMI Automatic Telescopic Filler – Canning Industry ZACMI automatic telescopic filler, designed for the volumetric filling of solid and particulate food products in cans and other rigid containers within continuous production lines. Manufactured by ZACMI, a specialist in machinery for the canning industry, the machine utilizes a rotary telescopic filling system that allows for the automatic, controlled, and continuous dispensing and introduction of the product into the containers. This type of technology is especially suitable for canning processes where a regular volumetric dosage of solid or particulate products is required, while maintaining a continuous flow of containers through the line. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dispensing -Automatic container feeding and positioning -Continuous container infeed and outfeed -Integrated conveyor -Industrial construction in stainless steel -Perimeter enclosure with safety guards -Integrated control panel -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling of containers using a rotary telescopic system. The containers are automatically fed and transferred to the carousel, where the dispensing and subsequent introduction of the product takes place. Once the filling is complete, the containers automatically continue to the next stage of the process. It can be integrated with: Djdpfx Afsxp Rqpevjwd -Product feeding systems -Can feeders and conveyors -Liquid, oil, or brine dispensers -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling machines and end-of-line equipment APPLICATIONS Especially suitable for canning industries, processors of vegetables, legumes, and other solid or particulate food products that require automating the filling of containers. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of ZACMI technology, telescopic filling, and continuous rotary operation provides a robust solution for industrial canning packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Dsdpfszxch Sex Afvjwd Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2017, condition: as good as new (ex-display), Flow meter for water Manufacturer: ABB Kent Messtechnik Type: 656 WP 4800 Dwjdpfx Asd Tg Szofvjd Pn: 16 bar Qn: 25 m3/h Ap: 0.3 bar 30 degrees 30 degrees

Condition: used, Year of construction: 2004, machine/vehicle number: PAL49, Used Keber PALPACK DS Palletizer The Keber PALPACK DS is a conventional automatic palletizer designed for end-of-line carton palletizing in beverage production and industrial packaging environments. This secondhand solution streamlines the final stage of a used bottling line by arranging sealed cartons into stable layers and placing them onto pallets according to predefined stacking patterns. Engineered for reliable throughput and smooth handling, it helps producers prepare loads for wrapping, storage, and transport with consistent quality and minimal operator intervention. Manufactured by Keber, the PALPACK DS integrates seamlessly into complete packaging lines processing glass bottles packed in cartons. Typical applications include bottled beverages in standard retail formats such as 0.75L, 1.0L, and 1.5L. Its practical layout and robust construction support continuous-duty operation in demanding facilities where uptime and pallet stability are essential. Whether upgrading an existing used bottling line or expanding capacity, this palletizing system offers dependable performance in a compact, operator-friendly footprint. Technical Specifications & Performance Data Manufacturer: Keber Model: PALPACK DS Machine type: Conventional automatic palletizer for cartons Year: 2004 Container handling: Designed for glass bottles packed in cartons Bottle formats: Compatible with 0.75L, 1.0L, 1.5L bottle formats (cartonized) Pallet format: Eur-Epal pallet, 800×1200 mm Advanced Automation & Control Systems The PALPACK DS enables automated layer forming and orderly pallet build-up for consistent, repeatable results. Its end-of-line control logic coordinates carton infeed, layer positioning, and pallet changeover, helping operators maintain stable stacks for downstream wrapping. The design supports clear operator access, safety interlocks, and straightforward adjustments to maintain efficiency during product runs and format changes. Production Line Integration Capabilities This palletizer is positioned downstream of a hot-melt case sealing stage and upstream of pallet wrapping, enabling a continuous, automated flow from packed case to finished pallet. It is compatible with standard conveyor systems and integrates into used bottling line layouts handling glass bottle cartons. The system is suited to beverage production where multiple bottle sizes are packed into cases and prepared for distribution. Typical integration examples include: Upstream: hot-melt case sealer (e.g., TE-CO 607-98) Downstream: automatic pallet wrapper (e.g., Imballaggi Service Group EASY WRAP 2000 A) Machine Condition & Maintenance History This equipment is listed as ready for operation within a complete line context. It is presented as a functional, secondhand palletizer suitable for immediate integration into industrial packaging and beverage production workflows. Operational Performance & Versatility The PALPACK DS focuses on carton palletizing for glass bottle packaging, supporting stable, repeatable pallet loads that protect product quality during handling and transport. Its design emphasizes consistent layer formation, dependable transf... Dsdpjxywafofx Afvjwd

Condition: used, Year of construction: 2003, machine/vehicle number: M317, Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monoblock features rotary motion for steady, synchronized bottle transfer between filling and capping stations. The integrated cap sorter ensures consistent cap orientation and feeding to the capping heads, supporting sustained high-speed operation. Standard industrial control architecture enables precise timing, smooth acceleration curves, and consistent torque application during capping.Automatic cap sorting and feeding to the capperCoordinated filler-capper synchronization for stable continuous flowIndustrial control logic for accurate cycle timingOperator-friendly interface and routine changeover adjustmentsElectrical protection and auxiliaries matched to 24 V control circuitsProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly within a complete used bottling line. It can operate inline with upstream bottle preparation equipment and downstream inspection, labeling, and packaging machinery. Format changes between 0.45L and 0.5L are supported with the correct set of format parts.Standalone or inline operation with conveyorsInterfaces readily with labeling, inspection, and end-of-line packaging systemsSuitable for liquid detergents, household cleaners, and similar chemical products when configured accordinglyFlexible container materials subject to starwheel and guide change partsMachine Condition & Maintenance HistoryOffered as a second hand rotary filling monoblock, the unit presents defined performance data for 0.45L and 0.5L formats. It is positioned for quick recommissioning in an industrial packaging environment, with capacities appropriate for medium-speed production. Availability and readiness support rapid deployment in existing lines.Operational Performance & VersatilityWith speeds up to 105 bottles per minute, this ACMA monoblock is engineered for consistent fill accuracy and secure closure application. The integrated sorter enhances capping efficiency and minimizes misfeed-related downtime. The rotary platform supports smooth bottle handling, reducing scuffing and maintaining presentation quality across PET or glass bottles when equipped with the correct handling parts.Stable rotary handling for reduced container stressHigh capping reliability supported by integrated sortingAdaptable to multiple home care and chemical categories with appropriate componentsBalanced... Dwodpfxoyr Hu De Afvod

Condition: used, Big bag discharging station Adjustable to different heights Equipped with lifting yoke for forklift Dedpoyt N N Tsfx Afvewd Fitted with steel hopper and vibrating motor

Condition: ready for operation (used), Year of construction: 2007, A Haver & Boecker bagging machine is available as a test machine for filling various powdery bulk materials including an MEC 3 weighing electronics. Weighing range: 10kg-50kg, adjustment increment: 50g, bag filling weight: 25kg, bagging capacity at 25kg: approx. 180/h, max. product moisture: 0%, product filling temperature: 20°C, bag material: 2-layer paper/PE with filter fleece. Documentation vorhanden. An on-site inspection is possible. Dodpfx Afox U Dv Ssvjwd

Condition: good (used), Year of construction: 1995, Fuel gauge, oil conveyor, oil dispensing system, oil station, fuel pump, tank data acquisition, tank system display, DSS microcomputer -Manufacturer: Tecalemit, DSS data interface .: 2.78 11 10.1 -Smallest measuring quantity: 0.5 liters -Volume flow: 1 to 10 l/min Dsdpfx Asrwqbysfvswd -DSS Microcomputer: 1.575001.1 -Dimensions: 370/280/H180 mm -Weight: 8.2 kg

Year of construction: 2026, condition: new, Compact, mobile system for filling and capping liquid, semi-liquid and viscous products in glass jars or bottles. The machine combines a volumetric piston filler and a pneumatic capper in one workstation and is suitable for juices, purees, jams, honey and sauces. The filler can be connected directly to a kettle or tank. It supports hot filling at temperatures up to 90°C and can process products containing soft particles. After filling, Twist-Off caps are closed by the pneumatic capper, whose adjustable torque enables consistent sealing. The machine can be adjusted for different jar and bottle heights. Technical specifications • Dosing range: 50–1500 ml, depending on the selected variant • Cap type: Twist-Off (lug) caps • Operation: semi-automatic, pneumatic • Maximum filling temperature: 90°C • Product-contact material: AISI 316L stainless steel • Chassis: mobile stainless-steel trolley with lockable caster wheels The hygienic stainless-steel construction is designed for food processing. Its mobile frame facilitates repositioning and provides convenient access for cleaning. Dwedpfx Ajz Nd D Ujfvjd

Condition: excellent (used), Dinnissen sack discharge system, sack discharge station Djdjzhkz Espfx Afvewd Semi-automatic machine All stainless steel Equipped with empty sack press Equipped with left-right distribution screw Equipped with DCE Donaldson dust extractor Neat, complete machine