Condition: used, Year of construction: 2007, machine/vehicle number: PAL53, Used COMACO PA4B palletizer 10800 BPHTechnical Specifications & Performance DataThe Comaco PA4B is a second hand, overhauled palletizer engineered for reliable end-of-line handling in beverage production and industrial packaging. Built in 2007 and professionally refurbished, this unit delivers robust performance with a maximum throughput of up to 10,800 bottles per hour (3x2 configuration), making it a strong fit for used bottling line upgrades where efficiency and footprint matter.Model: PA4BManufacturer: ComacoYear: 2007Maximum speed: 10,800 bottles per hour (3x2 pattern)Container materials supported: Aluminum cans, PET bottles, Glass bottlesPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmInstalled power: 1.4 kWElectrical supply: 400 V, 50 HzWorking pressure: 6 barApproximate footprint: 8165 x 7777 mmLayout note: Working height H = 1100 mm (as indicated on layout)Configuration: Conventional automatic palletizer with automatic layer-pad inserterAdvanced Automation & Control SystemsDesigned for dependable automation, the PA4B integrates proven Siemens control technology for stable operation and easy diagnostics. A Siemens Simatic HMI provides intuitive operator interaction, while the Siemens S7 PLC ensures precise motion control and sequencing.HMI: Siemens SimaticPLC: Siemens S7Operational mode: Conventional automatic palletizing with layer-pad applicationChangeover: Practical adjustments for varying pack patterns and container typesProduction Line Integration CapabilitiesThe Comaco PA4B integrates smoothly with upstream packaging machinery such as shrink wrappers, wrap-around case packers, and conveyors. It handles a wide range of secondary packaging units, including bundles, cases, and tray-packs, supporting both PET and Glass bottle lines as well as Aluminum cans.Inline/standalone: Suitable for inline integration or standalone operationHandled units: Bundles, cases, tray-packsMulti-product flexibility: Compatible with water, CSD, beer, wine, milk, oil, and spirits workflowsPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmMachine Condition & Maintenance HistoryThis palletizer is overhauled, tested, and ready for operation. Supplied in excellent working order with a commercial guarantee, it is an ideal choice for facilities seeking a reliable second hand upgrade with minimized commissioning risk.Status: Ready for immediate useCondition: Overhauled and guaranteedWarranty: 6 monthsSpare parts: Compatible spare parts availableOperational Performance & VersatilityThe PA4B addresses diverse end-of-line need... Bedpj Adtzqefx Anyedi

Condition: used, Year of construction: 2004, machine/vehicle number: DEPAL41, Used ACMI RASAR D200 depalletizerTechnical Specifications & Performance DataThis ACMI RASAR D200 depalletizer is a reliable solution for high-efficiency bottle handling within a used bottling line or second hand industrial packaging environment. Engineered for beverage production and general industrial packaging, it processes layers of bottles from standard pallets with precise and gentle handling. Designed for glass and PET bottle applications, it offers stable performance for multiple beverage categories, ensuring dependable operation in demanding production schedules.Manufacturer: ACMIModel: RASAR D200Year: 2004Machine type: DepalletizerMaximum speed: 16,200 bph (application dependent)Container materials: Glass, PETPallets handled: EPAL 800x1200 mmWorking height: 1200 mmOperating pressure: 6 barSupply voltage: 400 V (3PH + N)Frequency: 50 HzRated current: 51 AAuxiliary voltage: 24 V DCShort-circuit rating: 6 kAElectrical schematic code: EOC3691Approx. layout dimensions: length 14,367 mm; width 4,915 mmAdvanced Automation & Control SystemsThe ACMI RASAR D200 features an industrial-grade automation package centered on a Siemens PLC, delivering robust control, diagnostic capability, and stable operation. The control system supports automatic layer handling with coordinated movements for layer separation and transfer to downstream conveyors. Electrical architecture uses a 400 V three-phase supply with 24 V DC auxiliaries for sensors and control devices, ensuring safe and reliable low-voltage control.Siemens PLC-based control for dependable automation24 V DC auxiliary circuits for instrumentationClear operator interface and status signaling for quick troubleshootingIntegrated interlocks for safe operation and process controlProduction Line Integration CapabilitiesThe depalletizer integrates seamlessly into beverage production lines and broader packaging machinery systems. It interfaces with infeed/outfeed conveyors and can operate as a standalone depalletizing cell or as part of a complete bottling line. The RASAR D200 handles EPAL 800x1200 mm pallets and can be set up for multiple bottle patterns and sizes within glass and PET ranges, supporting flexible changeovers for different end products.Inline or standalone operation modesCompatible with upstream pallet handling and downstream bottle conveyorsDesigned for Glass and PET bottle handling across various sizesSuitable for Water, CSD, Wine, Beer, Spirits, Milk, and Oil applicationsMachine Condition & Maintenance HistoryThis unit is ready for operation and presented in excellent working order. It has been overhauled and is supplied with compatible spare parts. A warranty support period of 6 months is indicated, reinforc... Bdedpfs Adtz Rjx Anyji

Condition: used, Year of construction: 2004, machine/vehicle number: PAL55, Used OCME PERSEUS L12 palletizer 22680 BPHTechnical Specifications & Performance DataThe OCME Perseus L12 Palletizer is a conventional automatic palletizing system engineered for wrap-around packs and cases. Built in 2004 and featuring a robust mechanical design with Siemens automation, it delivers reliable performance for high-volume beverage and food packaging environments. Designed to handle products packed in cartons coming from upstream wrap-around or case packing machines, it supports standardized pallet formats for streamlined logistics and warehousing.Manufacturer: OCMEModel: Perseus L12Machine type: Palletizer (conventional, low-level infeed)Year of manufacture: 2004Maximum speed: 22680 (3x2 pattern)Handled unit: Wrap-around packs / casesSupported pallets: EPAL 800x1200 mmContainer materials downstream of packs: PET, Glass, Aluminum cansAutomation: Siemens PLCCompressed air: 6 barLayer pad inserter: AutomaticCompliance: CE-markedAdvanced Automation & Control SystemsThe Perseus L12 integrates a Siemens PLC for dependable control, recipe management, and precise coordination of infeed, layering, and discharge operations. The HMI-driven interface enables quick format selection and parameter adjustments to minimize downtime. Safety interlocks and a multi-color stack light provide clear visual status and enhance operator awareness. Modular programming supports stable layer formation and accurate placement of interlayer pads to ensure load integrity.Siemens PLC with user-friendly HMIRecipe-based format management for rapid changeoversIntegrated safety interlocks and emergency stop circuitsAutomated layer pad insertion synchronizationProduction Line Integration CapabilitiesEngineered for seamless integration into a used bottling line or second hand industrial packaging setup, the Perseus L12 accepts cartons from wrap-around or case packers and forms stable pallet loads. It interfaces easily with standard conveyor systems and can be configured for various layout constraints due to its low-level infeed design. It is suitable for beverage production handling of PET, glass, and aluminum can packs, making it ideal for water, CSD, beer, wine, milk, oil, and spirits applications.Inline operation with wrap-around packers and case packersDesigned for PET, Glass, and Aluminum can packsOptimized for EPAL 800x1200 palletsMulti-format flexibility for diverse product SKUsMachine Condition & Maintenance HistoryThis palletizer is ready for operation, overhauled, and offered with compatible spare parts. It includes a warranty period to ensure dependable startup and performance. The overall condition supports immediate deployment into beverage or food packaging lines with minimal commissioning effort.Ready for immediate useOverhauled with compatible spare partsWarrant... Bdsdpfxe Adyu Rj Anyji

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Bdjdpfxe Adt T Ts Anyoi Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry.

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock... Bdsdpfj Adywrex Anyei

Condition: used, Year of construction: 2012, We offer this used OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE mod. DIVA/5, year of construction 2012. Bdedpox Rw Hvofx Anyei Model: MOD. CONF. DIVA-5 Serial number: 2298 Year of manufacture: 2012 Accident protection guards compliant with with CE norms. Required electric power: three phase 220/380 V, 50 60 Hz. Required compressed air: 6 Atm. Frame in welded steel and painted with epoxy resin paint. Colour code: RAL 9006 (OMAG standard). If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 1971, machine/vehicle number: M126, Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Products: oils and oil-based liquids appropriate for gravity/weight filling Condition: NEW Bodpfx As Adyw Ssnyedi Documentation: operating and maintenance manuals included Safety: integrated guards and protections Advanced Automation & Control Systems Each filling station uses an individual load cell to measure and control product dose in real time. The system runs at atmospheric pressure with contactless nozzles to reduce cross-contamination risks and mechanical wear. Typical features include recipe selection for bottle formats and targets, automatic tare, drift compensation, and out-of-tolerance detection with reject signaling. A modern control panel with clear operator interface supports production counters, alarms, and changeover guidance. The electrical cabinet is designed for industrial duty and can be configured to common plant standards; integration with line controls and upstream/downstream interlocks is supported. Safety features include interlocked access doors, emergency stops, and jam diagnostics. Production Line Integration Capabilities This monoblock integrates seamlessly into complete lines alongside rinsing, labeling, coding, case packing, and palletizing systems. It is suitable for both new installations and upgrades where it must connect to an existing used bottling line or second hand equipment. Quick-change format parts support fast shifts among the available bottle sizes, while the cap feeder and 6-head press-on capper are tuned for 28–30 mm closures. The weight-filling architecture is versatile for oil applications and maintains accuracy across minor density or temperature changes. The machine communicates effectively with upstream rinsers and downstream labeling machines common in beverage production and food-grade industrial packaging environments. Machine Condition & Maintenance History The machine is in NEW condition and ready for commissioning. It is supplied with manuals to support installation, operation, and preventive maintenance. Wear components are designed for straightforward access, and the contactless, gravity-based design minimizes mechanical complexity. A recommended spare parts list can be...

Condition: used, Year of construction: 2005, operating hours: 16,412 h, machine/vehicle number: R96, Used Tetra Pak A3Flex 1000 Base - Year 2005Technical Specifications & Performance DataThe Tetra Pak A3/Flex 1000 Base is an aseptic carton filling machine designed for industrial packaging and beverage production. It forms, fills and seals carton packs in a controlled filling process, supporting efficient integration into an aseptic carton packaging operation.Manufacturer: Tetra PakModel: A3/Flex 1000 BaseDrawing specification: 648576-0100Year of manufacture: 2005Advanced Automation & Control SystemsThis filling machine is intended for automated carton handling, forming, filling and sealing within an industrial packaging line. The A3/Flex platform supports coordinated operation with upstream product preparation and downstream conveying, packing and coding equipment.Production Line Integration CapabilitiesSuitable for use as the central filling station in an aseptic carton production line, this machine can be integrated with carton handling conveyors, accumulation systems, secondary packaging machinery and line control equipment. Aseptic carton filling technology is widely applied in beverage production and other liquid-food packaging operations where sealed carton packs are required.The machine can be positioned downstream of product processing and upstream of conveying, coding and final packaging equipment. Integration should account for product supply, carton material handling, discharge conveyors and synchronization with downstream industrial packaging machinery.Machine Condition & Maintenance HistorySpare parts will be replaced as needed. This maintenance approach supports continued machine serviceability and helps maintain operational readiness for a second hand aseptic filling installation.Operational Performance & VersatilityThe Tetra Pak A3/Flex 1000 Base is built for automated carton filling applications. As part of a used bottling line or carton packaging operation, this type of equipment provides a dedicated solution for producing filled and sealed carton packs while supporting consistent handling through the filling and discharge stages.Installation Requirements & Site PreparationInstallation requires a suitably prepared production area with access for product feeding, packaging-material supply, electrical connection and discharge conveyor integration. Site planning should also allow adequate access for operation, cleaning, maintenance and replacement of service parts.Safety Standards & Compliance CertificationSafe installation and operation require the machine to be integrated with appropriate guards, operator access controls and emergency-stop provisions for the complete production line. Before commissioning, all safety devices, utility connections and hygiene-related operating procedures should be checked as part of the site acceptance process. Bedpfx Ans Adttyoyjdi

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. Bdsdpfx Ane Adyv Ujyei -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Condition: excellent (used), Fully automatic filling machine, De Vree V 156 Filling capacity: 1-20 liters Automatic cap feeder Automatic cap closer Bdedpfxjztc Sgs Anyei In very good condition, directly from production!!!

Condition: used, Year of construction: 2000, machine/vehicle number: M347, Used DIPRAM primi filling monoblock - Year 2000Technical Specifications & Performance DataThis DIPRAM filling monoblock is engineered for glass bottle applications requiring precise product preservation and secure closures. It combines a high-vacuum filler with dedicated capping capabilities to support a wide range of beverage production needs within industrial packaging environments.Filling system: High-vacuum technology for low-oxygen fillingNo. of filling valves: 16Vacuum pump: Not includedCapping options: Aluminum screw cap 31,5 x 24; T-top stopper Top/Head diameter: 28 mm, Cork/Shank diameter: 19 mm, Overall length/height: 29 mmContainer type: Glass bottlesConfiguration: Monoblock with synchronized filler and capper modulesManufacturer: DIPRAMAdvanced Automation & Control SystemsThe monoblock configuration ensures synchronized operation between the 16-valve filler and the capping stations, supporting consistent cycle timing and stable throughput. A centralized operator interface typically provides straightforward control of filling parameters and closure application, while mechanical synchronization delivers repeatable performance on glass bottles. Safety guarding and interlocks protect operators during normal operation and format adjustments. Quick tooling adaptation supports changeovers between aluminum screw caps (31,5 x 24) and T-top stoppers, aligning with modern beverage production standards and second hand bottling equipment best practices.Production Line Integration CapabilitiesThis monoblock integrates seamlessly into a used bottling line or new installations, operating inline with upstream and downstream equipment in beverage production. Typical integrations include an upstream rinsing machine and downstream labeling, inspection, and secondary packaging solutions. The monoblock accepts standard glass bottle handling and interfaces with conveyor systems common to industrial packaging lines.Inline compatibility with conveyors and accumulation systemsSupports integration with labeling machines, inspectors, and packersAdaptable to multiple glass bottle sizes with appropriate change partsSuitable for both standalone upgrades and complete line modernizationMachine Condition & Maintenance HistoryThis is a second hand filling monoblock designed for professional beverage production environments. It is suitable for immediate integration into an operational line following standard commissioning and utility connection. The vacuum pump is not included, allowing buyers to specify or match an external pump to plant standards.Operational Performance & VersatilityThe high-vacuum filling system is well-suited to products that benefit from minimized oxygen pickup, supporting quality preservation in glass bottles. Dual capping capability enhances flexibility: the aluminum screw cap 31,5 x 24 is widely used for many glass formats, while the T-top stopper option addresses premium closures. The monoblock’s compact footprint and synchronized drives deliver efficient ope... Bsdpfs Adtx Nsx Anyedi

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks Bedjzabgwspfx Anyjdi For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Year of construction: 2009, condition: used, machine/vehicle number: ISP18, Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (green, brown, flint)Closures handled (format identification): Crown cap, screw-cap threading, mechanical swing-topElectrical supply (InLine): 3-phase 400/415 V; 230/240 V phase voltage; 50/60 HzElectrical supply (plate data): 3-phase + N + PE 400/230 V, 20 A; 1-phase 230 V, 4 APower (Spectrum TX): 3.3 kW (continuous active power) at up to 72,000 containers/hPneumatics: 6–10 bar operating pressureIncluded handling: Infeed/outfeed conveyor sections and reject accumulation/discharge tableAdvanced Automation & Control SystemsThe inspector leverages HEUFT reflexx image processing with comprehensive optical inspection and residual liquid detection. The Spectrum SX TB 72 pre-selector verifies bottle geometry upstream, ensuring only conforming containers enter the main EBI. The Gateway II interface enables network connectivity for line data exchange and coordinated rejection logic.Full sidewall inspection at infeed and dischargeNeck and mouth integrity verification, including thread check for screw-cap bottlesResidual liquid detection via IR and HF technologiesSupplementary neck-area sensor to identify trapped labelsTest-bottle recognition for continuous rejection accuracy monitoringOperator control via integrated unit controller with synchronized pre-selectionProduction Line Integration CapabilitiesDesigned for seamless integration into high-speed beverage production, the system supports inline operation with existing conveyors and accumulation. Its pre-selection and main inspection units communicate over the network to optimize rejection precision and minimize false rejects, making it an excellent fit for second hand bottling equipment upgrades or complete used bottling line retrofits.Inline or stand-alone deployment with included conveyor interfacesNetworked pre-selection and main inspection for coordinated controlCompatible with standard glass beer formats (0.33L, 0.5L) Bdedpfxo Adt I Ro Anyei

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel Bjdox R Umtjpfx Anysdi - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Bjdpeww Hvmsfx Anyodi Special price due to warehouse clearance: €3,600 ex works Külsheim.

Condition: used, Year of construction: 1998, machine/vehicle number: M315, Used filling triblock for vinegar Fimer 1998 - 5000 BPHTechnical Specifications & Performance DataThis second hand triblock Rinsing-Filling-Capping Monoblock delivers reliable performance for glass bottling applications. Manufactured by Fimer with proven engineering quality, the SRT 24-24-6 configuration integrates a 24-clamp rinser, a 24-valve filler, and a 6-head capper into a compact, efficient platform suitable for industrial packaging and beverage production. It is a strong option for upgrading an existing used bottling line or expanding a production cell with robust, easy-to-service equipment.Manufacturer: FimerModel: SRT 24-24-6Year: 1998Configuration: 24-24-6 triblock (rinser-filler-capper)Production speed: up to 5,000 bphContainers: Glass bottlesRinser: 24 grippers with mobile nozzleFiller: 24 valves, gravity/light depression technologyCapper: 6 heads for aluminum screw capsCap format: 31.5 x 18 mm aluminum screw capElectrical supply: 380 V, 50 HzInstalled power: 6.5 kWCompressed air: max 6 barIncluded accessories: cap elevator and a selection of spare partsAdvanced Automation & Control SystemsThe monoblock features straightforward controls designed for dependable day-to-day operation. Mechanical synchronization between the rinser, filler, and capper ensures accurate bottle handling and repeatable processes at rated speeds. Standard operator interfaces allow parameter adjustments and format transitions, while interlocked guards and emergency stops support safe operation. The filling section’s light vacuum (low depression) assistance improves filling stability for still products, enhancing consistency and minimizing product exposure.Production Line Integration CapabilitiesEngineered for integration within an industrial packaging environment, this triblock can operate inline with upstream and downstream conveyors, accumulations, and inspection equipment. Starwheels and guides are designed for glass handling, offering smooth transfers between rinsing, filling, and capping stations. The 31.5 x 18 mm aluminum screw closure format is widely used across condiments and still beverages, enabling compatibility with existing cap feeding and sorting systems. The machine is well suited for retrofit into a used bottling line seeking reliable glass bottle processing.Machine Condition & Maintenance HistoryThis second hand unit has been used previously for vinegar in glass bottles and is complete with a cap elevator and select spare parts. Its configuration and technical state make it a practical candidate for recommissioning in beverage production or other still liquid applications. The equipment presents as ready for operation subject to standard installation, setup, and format tooling verification by the buyer.Operational Performance & VersatilityThe gravity/light depression filler is optimized for still, non-carbonated products, supporting clean fills with red... Bdjds Adt Scopfx Anyji

Condition: used, Year of construction: 1998, machine/vehicle number: M310, Technical Specifications & Performance Data Bdedpfo Ady Ecex Anyji This Rinsing-Filling-Capping Triblock by FIMER is a robust rotary monoblock engineered for glass bottle handling and precision filling. Built on the model SRT 24-24-6, it integrates a 24-clamp rinser with mobile nozzle, a 24-valve gravity/light depression filler, and a 6-head aluminum screw capper. Designed for reliable operation in beverage production and industrial packaging, it is suitable for second hand and used bottling line upgrades where consistent performance and compact footprint are priorities. Manufacturer: FIMER Model: SRT 24-24-6 Year: 1998 Rinser: 24 grippers, mobile nozzle Filler: 24 valves, gravity/light depression (slight vacuum) Capper: 6 heads, aluminum screw caps 31,5 x 18 Cap handling: Complete with cap elevator Electrical power: 6.5 kW Power supply: 380 V, 50 Hz Compressed air: Max 6 bar Construction: Rotary triblock for glass bottles Advanced Automation & Control Systems The triblock integrates coordinated rotary turrets for synchronized rinsing, filling, and capping. It is designed for straightforward operation with clear machine status visibility and quick access to critical areas for adjustments. The filler operates on gravity/light depression principles for stable liquid level control, ideal for products like vinegar in glass bottles. Electrical configuration: 380 V, 50 Hz Installed power: 6.5 kW Filling technology: Gravity/light depression for accurate, low-turbulence filling Safety systems: CE-marked with protective guarding and emergency stop circuits Changeover: Format changes supported via standard change parts Production Line Integration Capabilities This unit can be integrated into a complete used bottling line or operate as a standalone monoblock in glass bottling applications. It interfaces easily with upstream bottle conveyors and downstream inspection, labeling, and packaging machinery in beverage production and industrial packaging environments. Operation mode: Inline integration or standalone Container handling: Designed for glass bottles Cap logistics: Integrated cap elevator for continuous feeding Applications: Suitable for vinegar and similar still products Machine Condition & Maintenance History The triblock comes from a professional bottling context and is presented as a second hand solution in working condition, ready for operation. The configuration and components indicate routine industrial use with standard maintenance practices typical of glass bottling environments. Status: Ready for operation Usage: Previously used to fill vinegar into glass bottles Operational Performance & Versatility With 24 rinsing grippers and 24 filling valves, the machine provides balanced throughput, while the 6-head capper ensures consistent aluminum screw cap applicat...

Year of construction: 2007, condition: used, machine/vehicle number: AT93, Used Bottle Diverter APSOL 3500 bph The Used Bottle Diverter APSOL 3500 bph efficiently redirects bottle flows within high-speed bottling and packaging lines. Its dual-path configuration, in particular, allows the system to dynamically control product direction, thereby improving distribution toward parallel lines or accumulation zones. Consequently, this diverter increases plant flexibility, optimizes output, and significantly reduces bottlenecks. As a result, it becomes an essential component in the optimization of continuous production lines. Structural Design and Technical Dimensions APSOL manufactured the DFM2 model in 2007. The machine is currently ready for installation. Since the frame is built from stainless steel, it ensures durability and resistance in demanding industrial environments. In addition, the compact dimensions—1400 mm in length, 1000 mm in depth, and 2300 mm in height—allow the Used Bottle Diverter APSOL 3500 bph to integrate easily into tight spaces. Therefore, engineers can implement it without modifying existing layouts. Performance and Operational Capacity The Used Bottle Diverter APSOL 3500 bph handles a nominal capacity of 3500 bottles per hour. Accordingly, this speed suits high-output production facilities. Furthermore, the diverter system provides smooth, synchronized transitions that prevent both accumulation and bottle damage. As such, it works ideally for managing multiple product flows during filling, labeling, or packaging phases. In this context, the system ensures maximum product integrity while maintaining operational continuity. Control via OMRON PLC An OMRON PLC system controls all machine operations. Because of its reliability and precision, the controller effectively manages diverter positioning, sensor readings, and switching logic in real time. Moreover, the interface allows technicians to quickly configure settings according to production needs. Thanks to this capability, the Used Bottle Diverter APSOL 3500 bph adapts immediately to layout or format changes. Consequently, it minimizes downtime and ensures a stable operational flow. Power Supply and Energy Consumption The device operates on a 400 Volt three-phase power supply, consumes 2 kW, and runs at 50 Hz. Despite its industrial performance, the machine maintains a low energy profile. For this reason, the Used Bottle Diverter APSOL 3500 bph integrates seamlessly into existing bottling lines, even where power limitations exist. Moreover, it complies with all relevant European energy efficiency standards, reducing operational costs in the long term. Safety Systems and Technical Documentation The machine includes both active and passive safety features, such as protective barriers and emergency stop buttons, all compliant with current safety directives. Additionally, APSOL provides comprehensive manuals with detailed electrical diagrams and scheduled maintenance procedures. As a result, operators can install and operate the machine autonomously. Moreover, the documentation supports faster troubleshooting, which increases overall system uptime. Technical Conclusion Bode Adt Tgepfx Anyjdi In summary, the Used Bottle Diverter APSOL 3500 bph provides a robust and flexible solution for intelligent bottle flow management. Not only does it offer precise OMRON-based control, but it also guarantees compatibility with modern bottling environments. Therefore, engin...

Condition: used, Year of construction: 2003, machine/vehicle number: DEPAL36, Used Automatic Depalletizer ACMI  2200 plastic crates/hour The Used Automatic Depalletizer ACMI 2200 plastic crates/hour, model Rasar D180, operates as a fully automatic system for bottom-feed depalletizing of 1-liter glass bottles packed in 12-bottle plastic crates. Specifically designed for high-speed bottling lines, the system processes up to 2200 boxes per hour. Moreover, its modular frame allows seamless integration into existing production lines. Although it is currently dismantled and in storage, the unit remains in full working condition, ready for reinstallation. Depalletizing Structure and Operating Mode The Used Automatic Depalletizer ACMI 2200 plastic crates/hour utilizes a conventional automatic vertical structure to handle pallet loading from below. This configuration, therefore, ensures optimal stability and precision during the handling of glass containers. In addition, the machine includes an integrated pallet magazine, which automatically feeds pallets into the process without requiring manual assistance. Consequently, the system improves line efficiency and minimizes stoppage time. Furthermore, thanks to its automated design, the machine reduces labor dependency and enhances repeatability. Bdjdpfx Ae Adyx Nsnyei Container Compatibility and Format Handling in the ACMI depalletizer This machine specifically handles 1-liter glass bottles arranged in 12-bottle plastic crates. As such, it suits production lines that deal with fragile, heavy, or pressurized containers. In terms of compatibility, the Used Automatic Depalletizer ACMI 2200 plastic crates/hour meets standard industry requirements for crate and bottle handling. Additionally, it ensures accurate transfer from pallet to crate and then to the conveyor system. Not only does the equipment offer reliable performance, but it also reduces the risk of damage during transfer. Similarly, its precise control mechanisms help optimize changeovers when switching formats. Safety Features and Electronic Control of the ACMI depalletizer Engineers equipped the machine with certified safety systems that meet all current regulations for automated equipment. These features include physical guarding, sensor-based detection, and emergency stop functions in critical zones. As a result, the machine ensures safe operation in industrial environments. The Used Automatic Depalletizer ACMI 2200 plastic crates/hourruns under the control of a Siemens PLC, which manages operations through real-time sequencing and diagnostics. In particular, the PLC simplifies fault detection, thereby reducing downtime. Moreover, its open architecture supports easy integration into plant-wide SCADA systems. Therefore, users benefit from complete process visibility and responsive control. Technical Documentation and Operational Status In terms of documentation, the Used Automatic Depalletizer ACMI 2200 plastic crates/hour includes full technical manuals. These documents cover installation, electrical schematics, PLC logic, and communication interfaces. As a result, maintenance teams can easily service and adapt the system as needed. Although the machine is currently stored and disassembled, all core components remain available and intact. Consequently, technicians can reassemble and recommission the unit with minimal intervention. In summary, this depalletizer offers a reliable, automated, and efficient solution for bottle crate depalletizing in high-speed pr...

Condition: used, functionality: fully functional, Dosing hopper with inclined base, equipped with an extraction screw conveyor. Bodpfx Anozxz Iqjyedi Capacity: 3 m3 Dimensions: 2800x1400x2300mm Driven by a high-efficiency ALMO IE3 geared motor (model MH3-100L4, 230/400V, 1445 rpm, manufactured 07/2017). Equipped with plexiglass inspection windows. Mounted on a mobile frame with wheels. In good overall condition. Made of painted steel.

Year of construction: 2022, condition: new, We are selling the gummy-making machine because we no longer use it. The machine has never been used and has been stored in our production facility for all these years. You can view it at our warehouse. If you are interested, please contact me. Bjdpfx Ansz Rzknoyodi

Condition: used, Year of construction: 2013, machine/vehicle number: DEPAL44, Used SIDEL seep-off depalletizer - Year 2013Technical Specifications & Performance DataThis Sidel Sweep-Off automatic depalletizer is designed to unload bottles and jars from palletized layers and transfer them efficiently to the downstream production line. Built in 2013, it is suitable for industrial packaging operations requiring reliable container handling at the start of a used bottling line.Manufacturer: SidelModel: Sweep-OffProduction capacity: up to 200 layers/hourProcessable pallet format: 1000 x 1200 mmContainer materials: Glass and AluminumHandled containers: Bottles and jarsInstalled power: 17.7 kWElectrical supply: 400 V, 3-phase + protective earth, 50 HzFull-load current: 32 AOperating pressure: 6 barAdvanced Automation & Control SystemsThe machine operates automatically through a Siemens S7-300 PLC and a B&R Panel PC 800 operator interface. This control architecture provides operators with an intuitive interface for managing depalletizing cycles, pallet handling and line transfer operations. Automated control supports consistent layer discharge and coordinated operation with connected bottling equipment.Production Line Integration CapabilitiesThe Sweep-Off depalletizer is positioned at the infeed of a bottling or industrial packaging line, where it transfers containers from 1000 x 1200 mm pallets to conveyor systems feeding downstream process equipment. It can be integrated with rinsing, filling, capping, labeling and secondary packaging machinery. Its handling capability for glass bottles, aluminum cans and jars makes it suitable for flexible beverage production and packaged food applications.For a second hand production line, the depalletizer provides an important automated material-handling function by reducing manual pallet unloading and maintaining a controlled flow of empty containers toward the line.Machine Condition & Maintenance HistoryThe machine is ready for operation and has been overhauled. Compatible spare parts are available, and the machine is supplied with a 6-month warranty. Its stated ready-to-use condition makes it suitable for buyers seeking a used bottling line component that can be integrated into an existing industrial packaging installation.Operational Performance & VersatilityThis automatic depalletizer is intended for bottles and jars used in preserves, still water, sparkling water, soft drinks, milk, oil, beer, wine and spirits production. The Sweep-Off handling concept supports orderly transfer from pallet layers to the production line, helping maintain a continuous container supply to downstream bottling equipment. Its compatibility with glass and aluminum containers broadens its use across beverage production and food packaging environments.Installation Requirements & Site PreparationInstallation planning should allow for pallet loading and unloading access, the 1000 x 1200 mm pallet footprint, and connection to infeed and discharge conveyors. The electrical installation requires a 400 V, 3-phase + protective e... Bedpez E Dgmjfx Anyjdi

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Bodsv Di Itjpfx Anyjdi

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version Bodpfx Aezpy Nzenyjdi For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: used, Year of construction: 2015, machine/vehicle number: M352, Used TREPKO type 233KSP Filling monoblock - Year 2015Technical Specifications & Performance DataThe Trepko Type 233KSP filling triblock/monoblock is industrial filling and capping equipment for continuous gravimetric dosing of food, personal-care, household and industrial liquid products. Manufactured in 2015, this machine combines filling and plastic cap application within a compact production system designed for accurate container handling.Manufacturer: TrepkoModel: Type 233KSPProduction capacity: up to 7,200 containers/hourOperating rate: 40 cycles/minFilling system: gravimetric fillingFilling valves: 3Filling nozzles: 3Container format range: 100 g to 500 g, adaptable through format changeoversDimensions: 3.3 m length, 2.0 m width, 3.3 m heightWeight: 2,500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen Bradley CompactLogix 1769-L30ERM PLC and a Pro-Face HMI, supporting controlled operation of the filling and capping sequence. Its gravimetric filling configuration is intended to support repeatable dosing performance in continuous industrial packaging applications. Format changeovers allow the machine to be adapted to different pack presentations within the stated weight range.Electrical supply: 3 x 400 V AC + PE + NFrequency: 60 HzElectrical consumption: 9.5 kVACompressed-air requirement: 6 barApproximate compressed-air consumption: 850 NL/minProduction Line Integration CapabilitiesThis filling and capping monoblock can operate as a central process unit within a dedicated industrial packaging cell. It is designed for PET, PP and HDPE containers fitted with plastic snap-on or press-on caps. With its compact footprint, the equipment can be integrated with upstream container supply and downstream conveying, inspection, labeling and secondary packaging machinery.The 100 g to 500 g format capability supports product presentation changes through dedicated change parts and format adjustments. This flexibility makes the machine suitable for second hand production lines requiring filling and capping equipment for multiple container presentations.Machine Condition & Maintenance HistoryThe machine is currently in production and functional. It has completed 15,000,000 cycles. Available documentation includes manuals and P&ID documentation. The system is supplied with 35 spare parts and is ready for installation.Operational Performance & VersatilityThe Trepko gravimetric filler is intended for accurate filling of products such as margarine, shortening, ketchup, mayonnaise, peanut butter, liquid soap, liquid detergent, lotions, liquid yogurt, juice and industrial lubricants. This broad application scope supports food processing, beverage production, personal-care filling and industrial product packaging.The three-head capper applies plastic snap-on or press-on caps with a 127 mm cap size. The combined filling and capping arrangement reduces intermediate handl... Bsdpj Ady Ansfx Anyedi