Condition: ready for operation (used), Heidenhain UV 105 ID: 344 980-02 SN: 11803610A – complete overhaul and testing carried out professionally, with test report, 3-month warranty, 100% functional, scope of delivery as shown in the photos. Important: In the exchange process, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €300 including VAT will be applied. Attention: You are bidding on a Heidenhain UV 105 inverter, ID: 344 980-02, SN: 11803610A, as part of an exchange service. It has been professionally overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. Both in the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €300 incl. VAT will be issued. Lrsdsz R Ii Repfx Adcju

Condition: ready for operation (used), Philips PE 2580/30 measuring head 9418, serial number: D4581, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lredpfxsz R Ilre Adcju

Condition: ready for operation (used), Vogel 122 049 310 Central lubrication system - 110/220V - 50/60Hz, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrodpfx Adoz R Il Secju

Condition: ready for operation (used), Heidenhain UVR 120D inverter, ID: 390 188-01, serial number: 14057083B – complete with test report, professionally refurbished and tested, with a 3-month warranty. In good condition, 100% functional. Scope of delivery as shown in the photos. Ljdpfx Aez Syzuedcoru

Condition: ready for operation (used), Siemens 1FU1050-6GF tachometer for 1FT series, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfxoz Sy Axo Adcoru

Condition: ready for operation (used), Siemens 6ES5948-3UA21 CPU 948, E-Stand 4, used, minor signs of wear (levers for "Reset" and "Run/Stop" are broken), 100% functional. Ledpfxei Edrzj Adcsru

Condition: ready for operation (used), Heidenhain 337 558-04 servo card 00, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrodpfjz Syy Dex Adcsu

Condition: excellent (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Contactor Power Contactor Original Packaging -Type: 3RT1065-6AP36 -Auxiliary switch: Type 3RH1921-1DA11 -Number: 2x contactors available -Price: per piece Lsdpfx Adoz Rwnisceru -Cardboard dimensions: 270/200/H240 mm -Weight: 6.6 kg/pc.

Condition: used, Stäubli Stäubli TX60 industrial robot with CS8C-TX60 controller – 6-axis robot arm For sale is a used Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. This robot is ideally suited for precise handling, assembly, or testing tasks in automation technology. Technical data – Robot arm TX60 Axes: 6 Max. payload: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection class: IP65 (optional IP67 at the wrist) Robot weight: approx. 51.4 kg Controller CS8C-TX60 Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control Communication via Ethernet / RS232 / Fieldbus (optional) Digital inputs/outputs and expansion options Protection class: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Lodpfx Aoziaaysdcsru Scope of delivery Stäubli TX60 robot arm CS8C-TX60 controller Connection cable (robot–controller) Teach panel, handheld device Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, KEBA ABB Type: SX Teach Pendant Unit-2 16/64 Teach Pendant programming device for ABB robots Lrjdpfx Ajzgcbuodcou 3HAC023195-001 Type: SX Teach Pendant Unit-2 16/64 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks Lredpfx Aszlq E Ssdceu For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, original robot connection cable, and accessories as shown in the pictures, will be delivered. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Robot year of manufacture: 03/2023 Controller year of manufacture: 03/2023 Controller: CS9-TS2-40 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Total weight: approx. 68 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: CS9 rack controller VAL 3 activated PROFINET Device REST API integrated Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA PROFINET Ethernet Digital inputs/outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling mounting installed Original documentation Accessories as shown in the pictures Application areas: Pick & place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2023. Optical condition as shown in the pictures. System startup and information menus have been tested. Robot system including controller. A teach pendant is not included in the scope of delivery. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Stäubli Type: Stäubli Robot RX160 and CS8C controller with handheld device, software, and PC. Lredpfszdyt Aex Adceu Measuring Robot Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on an integrated Siemens industrial PC. 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical Data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on a reflector panel. Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at a distance of 10 m Beam diameter < 35 mm at a distance of 50 m Beam diameter < 65 mm at a distance of 100 m Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be expanded with additional plugins for specific tasks and customer-specific extensions. With the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual operations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column testing: Haptic tests along complex paths Large measuring range thanks to a multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line testing: Haptic and optical tests Interchangeable test adapters for a variety of devices Automatic testing, evaluation, and labeling including integrated leak test Vehicle seat testing: Functional and haptic tests Headrest distance measurements Comfort and stiffness assessments Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language skills required Variable and dynamic test sequences Branching sequence control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical measurement data display and report generation Flexible and expandable through plug-in architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: RX90 Stäubli Robot Control unit RX 90-CS7 Lifting capacity (nominal load - kg): 6 kg Total weight: 112 kg Condition: used Scope of delivery: (See image) Ledpfezdim Tjx Adcsru (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, ZASCHE Sitec Type: FPM 10 GP 10 Lredpszdim Hefx Adceu This device was used in the manufacturing of instrument panels. It consists of the following components: KBK - FPM 10 - 7.0 x 5.0 Travel carriage - LWK 762 x 762 Load lifting module - Z-L6 - 80/1280 - 1486 Load handling device - GP10 Load capacity: 10 kg Scope of delivery: (ZASCHE Sitec handling device, technical documentation) Condition: used (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x Return conveyor 2 x Control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Lrodpfx Adjzd Rk Eecou

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ledpszil R Rsfx Adceru Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Denso Type: Denso 6-axis robot VS-087 / Controller 410200-2611 A VS087-AV6-C3N has a cleanroom class 3 protection rating. Denso industrial robot with Denso controller. Industries and applications: The VS-087 series offers high speed and high performance in a compact, streamlined housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and the wide range of available options, the VS-087 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material maintenance, packaging, palletizing, and custom applications. Denso 6-axis robot VS-087 with Denso robot controller 410200-2611. The compact model impresses with outstanding performance and speed. Ledpezd Ubzsfx Adceru Robot model VS-087A4-AV6-C3N-ANNDN-NNNN Arm reach: 905 mm Payload: 7.0 kg Cycle time: 0.34 sec Repeatability: ±0.03 mm Weight: 51 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Ljdpfx Adozh U Tfocoru Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, SCARA Type: R6Y XGL400150 Ljdezdywhjpfx Adceru Omron SCARA industrial robot with PB programming box, R6Y XGL400, XG series Dimensions (W x L x H): 1200 x 1000 x 2200 mm SCARA robot for industrial applications: • Higher reliability (no belts in the XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy to use • High rigidity • Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. payload ranges: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/- 0.01 mm R: +/- 0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/- 140 º Y-axis +/- 144 ° Z-axis —— ° R-axis +/- 360 ° Weight: 350 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. DEVELOPMENT OF GSG ROBOTICS Ljdpfoz Tagasx Adceru GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: ready for operation (used), Berger Lahr VRDM397/50LWCEB / BRS397W361FCA stepper motor, serial number: 2404104758 + Binder 76 43108H07 rotary encoder. Connector partially broken, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Lrodpsi D E Npofx Adcsu

Condition: new, Bosch SD-B 4.140.020-01.010 Brushless servomotor, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos, hole spacing of the mounting holes: 117 x 117 mm, diameter of the drive shaft: 25 mm. Lsdpei D E Sksfx Adceru

Condition: ready for operation (used), Bosch SD-B3-095.030-10.000, brushless servo motor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Lredpfoi D E Snex Adcju

Condition: ready for operation (used), Bosch SD-B3.050.030-05.000, brushless, permanent magnet synchronous servomotor, serial number, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ledpei D E S Ijfx Adcsru

Condition: ready for operation (used), Bosch SD-B4.140.020-04.000, brushless, permanent magnet servo motor, serial number: 946000756, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lrsdpfx Aoi D E T Nedcsu