Side mills

ZERMA GSL 180/180

Condition: new, Year of construction: 2026, functionality: fully functional, construction height: 1,207 mm, construction width: 420 mm, number of blades: 30, rotor diameter: 180 mm, rotor length: 300 mm, Equipment: CE marking, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Nodpfx Apsyzrfujhjdb Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Ndjdpfx Apovl Skgehjb Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been designed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be resharpened multiple times. Ndodpeyr I Edofx Apheb Material is fed via a noise-insulated, sandwich-construction feed hopper, which is available in various designs depending on the type of material handling. Depending on the application, the granulators of this series are mounted on either a low or high frame and equipped with an appropriate suction/extraction tray. Combined with a wide range of options, these granulators offer highly flexible use. In addition to the typical advantages of all slow-speed granulators, such as low noise emissions and virtually dust-free regrind, the granulators GSL 180/120 to GSL 180/430 are distinguished above all by their knife, rotor, quick-snap system, and excellent accessibility.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Motor power (direct drive): 3.0 kW (gearbox motor) Rotor speed: approx. 200 rpm (the low speed reduces noise and dust generation) Dimensions of the cutting chamber: 270 x 180 mm Dimensions of the rotor: diameter 180 mm / cutting width 180 mm Cutting system: 18 rotating blades (stepped/segmented arrangement on discs) and 2 fixed blades (holder with 4 cutting edges) Blade design: The quick-snap blade system eliminates the need for readjustment of the gap after sharpening (the blades lock into a fixed position). Machine weight: approx. 130 kg Dust extraction: Lower stainless steel container, prepared for pneumatic (vacuum) dust extraction. Nodpjztfh Djfx Aphsdb Additional blades and sieve.

Year of construction: 2007, condition: ready for operation (used), Output: 39,600/h, additional accessories are available. Njdsmdry Hjpfx Aphjdb

Condition: excellent (used), Side mills Zerma Year of manufacture 2005 Type: GSL -18AMIS) Nodpjlvt Eqsfx Aphsdb

Condition: used, Year of construction: 2003, functionality: fully functional, The auxiliary mill from ZERMA, model GSL 180/300 Njdjy Ughqjpfx Aphodb Power: 4 kW Hopper opening: 290 mm x 270 mm Knives: 10 pieces on the holder, for a total of 30 Screen: 6 mm

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Nedjtrhq Hspfx Aphodb - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Shelf upright: 3,100 mm x 1,100 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,340 mm Number of bays / rack row: 05 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 45 pcs. Total pallet spaces: 45 pcs. Nedpfxom Eyk He Aphodb issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 06x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 3.100 mm high 1.100 mm deep 20x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 40x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: new, Pre-shredder 5.5 kW – Robust, compact and versatile This powerful pre-shredder with a 5.5 kW drive has been specifically developed for the efficient preliminary shredding of a wide range of materials. Originally designed for processing cables, the machine’s robust construction also makes it suitable for many other applications in recycling and material processing operations. With its compact dimensions of 200 cm height, 110 cm width and 60 cm depth, the shredder can be integrated into limited spaces without compromising on performance. The 400 mm shaft ensures reliable power transmission and consistent shredding even when handling demanding materials. Key Features: • Motor power: 5.5 kW • Machine dimensions: 200 × 110 × 60 cm (H × W × D) • Shaft length/dimension: 400 mm • Areas of application: Cables, plastics, light metals and other materials • Design: Durable and stable for industrial use Advantages: • Efficient pre-shredding for downstream processes • Versatile use beyond just cable processing • Space-saving design with high performance • Robust construction for continuous operation Interested? Feel free to get in touch! Ndedeyvh Hkspfx Aphsb