Used Weinig Moulder for sale (473)

Condition: used, Year of construction: 2006, 9 spindles plus 1x saw unit Working width: 38 - 300 mm Nedpfx Afsyh T R Ij Uoku Working height: 40 - 110 mm Technical data in the attached document Available from October 2026

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Nkedpjyg Hflofx Af Usu Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers Njdpfx Afeya Hiqs Ujku - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Left 11kw Top 11kw Nedpevyr Hkofx Af Uoku Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: excellent (used), Weinig LTB250/3500G belt lifter Length 3500mm Width 250mm Speed 22m/min Nodju Eclrspfx Af Usku

Condition: used, working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Nkjdpfx Afsxpn Tns Uju Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Profile grinder Weinig model Rondamat 929 Nksdsydd Ncspfx Af Uou

Condition: used, Number of boring spindles 6 St. Nksdpfjyanu Ujx Af Ueu Working width 230 mm Working height 130 mm Feed motor 5,5 kW

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Edge jointing fence Auxiliary stop 4 kW, 380 Volt Two-knife wedge shaft Tables fold upwards Machine ready for immediate use Nsdpfx Afsx U Dgdo Usku

Condition: like new (used), Hydraulic feeder type 814 300 Nkodpfxeyi Afms Af Uju 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Nedpfx Aex Tu N Hsf Ueku Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, Year of construction: 1962, Used machine Year of manufacture: 1962 Equipment and technical data: Nedpfxjw Sbbrj Af Usku Planing width: 630 mm Working height: 250 mm Table length: 1100 mm Extraction nozzle: 160 mm Knives: 4 strip planing knives The machine does not have a motor brake! Location: Flörsheim Availability: short notice

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm Nkjdpoh Dwl Dsfx Af Uju weight ~ 3000 kg

Condition: used, Bore: 40 mm Nedpfx Afox Tu Rws Usku Cutting circle (ø): 125 mm Length: 170 mm Material: steel Blades: Planer strip knives Z2 + chamfer cutter Available: 2 pieces Price per piece: €239.00 + VAT

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Nodpfxevu Saye Af Uoku Without feeder: 125 000€

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Nkodpfjv Er Ufex Af Uou Feed speed 8-60m/min

Condition: good (used), functionality: fully functional, Feeder Weinig EM-4 Njdpfx Asullxgsf Usku

Condition: not inspected (used), Year of construction: 1999, planing width: 230 mm, total height: 120 mm, Four-sided planer / Moulding machine Manufacturer: Weinig Model: Profimat 23 E Year of manufacture: 1999 For four-sided planing and profiling Max. planing width: 230 mm Max. planing height: 120 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: Bottom, approx. 4 kW Right + Left, approx. 5 kW Top, approx. 4 kW Bottom, approx. 4 kW Nodpfxsygcl Is Af Usku Connection: 380 V, 50 Hz

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Nksdpoxb U Txefx Af Uou -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor Nkedpsxftvaefx Af Ueu -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Arrangement of spindles Bottom 4kw Left Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic presses divided into 3 sections Feed speed adjustable by variator 5-24m/min Nksdeu Hgd Iepfx Af Uou CE certificate Technical documentation

Condition: used, Year of construction: 2000, Four-sided planer Weinig Profimat 26 S, 5head Year of construction 2000 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines1. Spindle - under 4 kW 2nd/3rd Spindle - left/right 11kW 4. Spindle - above 5.5kW 5. Spindle - under 4 kW Feed motor 3kW Njdpswnh Ekjfx Af Uoku Main fuse 63 amp. Dimensions 4500 x 1500 x 1700 mm (L x W x H), weight 2500 kg - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 89525 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW Nkodpfx Afjx S Sk Ej Uou • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 Nedpeibq Nisfx Af Usku - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers Nksdew Ipcvspfx Af Ueu - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)