Used Tec Freetec for sale (94)

Condition: good (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Bdjdpfexcvgiox Abbeb Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook Bodpfx Ajyxb Hcsbbodb High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Bdedex T Di Njpfx Abbsb Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for tool manufacturing, training workshops, maintenance departments, as well as precise single-piece and small-batch production. Features: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bedways - Fixed steady rest - Live center - Multifix quick-change toolpost - Slip clutch for feed overload protection - Foot brake - Machine work light - Bed stop with micrometer adjustment Bjdpfx Asyudwbsbbedb - Toolmaker’s accuracy according to DIN 8605 - Two-tone paint: Blue (RAL 5012) / Grey (RAL 7032) - CE conformity - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MT 4 Machine weight: 1400 kg Thread cutting range: Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Other: Inspection by appointment. The machine is ready for immediate use.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2015, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: orange, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.124 kg Carrying capacity: 37.876 kg GVW: 43.000 kg Bdedpfsyzhrdjx Abbob Maintenance, history and condition APK (MOT): tested until 08/2026 Technical condition: good Visual appearance: good Identification Registration number: ON-94-XS Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2015, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: orange, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.124 kg Carrying capacity: 37.876 kg GVW: 43.000 kg Bjdpfx Ajyzhnrjbbjdb Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Identification Registration number: ON-92-XS = Additional options and accessories = - ADR - Air suspension - EBS - Extandable - Lift axle - Twist-locks = Remarks = ADR: EX/II EX/III FL AT

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ - Cargo area length: 11,516 mm - Height: 3,900 mm - Width: 2,550 mm - Permissible total weight: 36,000 kg - Unladen weight: 7,640 kg - SAF axles with disc brakes - 385/65 R22.5 - ABS - Alloy rims - Aluminium landing legs - Air suspension - Wheel chocks - 1st axle is a lift axle - Open side underrun protection - Grain chute - A-board - Plastic toolbox Bsdpfjyzvf Esx Abbedb - Platform - Roll tarp 680 g/m2 - 5x tarp holders - Multi-chamber lights (standard) - 4x work lights - LED marking lights, flashing - Acoustic reversing warning device For further information, we are happy to assist you.

Condition: used, axle configuration: 3 axles, first registration: 10/2003, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - EBS - Toolbox = Further information = Axle configuration Tyre size: 385/65R22.5 Axle manufacturer: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Bdodpoyxlwljfx Abbeb Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Kerb weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Identification Registration number: OH-08-HS

Condition: used, axle configuration: 3 axles, first registration: 11/2010, total length: 9,300 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,510 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Tyre tread left: 20%; Tyre tread right: 20% Weights Unladen weight: 4,050 kg Payload: 36,950 kg Gross vehicle weight: 41,000 kg Bdjdpfxoyu Tzpj Abbjb Condition Damages: none Identification Registration number: OL-56-FN

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Bedpfx Abeyk Ab Dobjdb

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC Bdedpfx Asdzqptjbbjb - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Bdedpfxedzqb Ee Abbeb Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: good (used), machine/vehicle number: 2452, Year of construction: 2015, load capacity: 50,000 kg, total length: 6,000 mm, total width: 2,500 mm, operation weight: 3,400 kg, Tec Container 20" WITH DOUBLE-HOOK from Uniktruck Bjdsyuhmtspfx Abbedb

Condition: good (used), machine/vehicle number: 21529, Year of construction: 2024, load capacity: 50,000 kg, total length: 2,440 mm, total width: 6,250 mm, operation weight: 3,500 kg, Tec Container 20“ WITH from Uniktruck Bedpfx Aoyuhk Sobbedb

Condition: good (used), machine/vehicle number: 21528, Year of construction: 2024, load capacity: 50,000 kg, total length: 2,420 mm, total width: 6,000 mm, operation weight: 3,800 kg, Tec Container 20" WITH DOUBLE-HOOK from Uniktruck Bdodpfeyuhk Eox Abbob

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Bdjdpfx Abjyt Exkebsb Rear axle 1: tread left: 25%; tread right: 25% Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH

Condition: used, axle configuration: 3 axles, first registration: 05/2005, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Lift axle - Air suspension - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: ROR Brakes: Drum brakes Bdsdpfx Aboyt Ew Hebjb Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; right: 20% Rear axle 2: Tyre tread left: 35%; right: 35% Rear axle 3: Tyre tread left: 40%; right: 40% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damage: none Identification Registration number: OH-88-XH

Condition: used, axle configuration: 3 axles, first registration: 05/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 35%; tyre tread right: 35% Rear axle 2: tyre tread left: 35%; tyre tread right: 35% Bjdpeyt Ewtjfx Abbsdb Rear axle 3: tyre tread left: 35%; tyre tread right: 35% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-97-KH

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: Bsdpfxjyhi Huj Abbjdb * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Bedpfxeyubklo Abbjdb Operating hours:

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) Bsdpfx Aboyubi Iebjdb - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized Bdedpfjyq Ufusx Abbjb * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S Bdsdpeyq Ufzsfx Abbsb * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks Bdsdpeyq Ufnofx Abbjb * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) Bdodpfjhr Rlyex Abbeb The machine is in a very good condition, few operating hours machine book / instruction manual