Used Liebherr Crane for sale (239)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Kdodpfx Ajw T R Aujd Nsg Max. wheel diameter: 280 mm Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Kdedow T R Ahspfx Ad Neg Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Kdjdpfxjw T Ry Tj Ad Nsg Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: used, functionality: fully functional, machine/vehicle number: 145202, Year of construction: 2017, operating hours: 17,500 h, load capacity: 40,500 kg, lifting height: 14,300 mm, fuel type: diesel, mast type: telescopic, construction height: 4,980 mm, power: 230 kW (312.71 HP), empty load weight: 72,500 kg, drive type: Diesel, construction width: 4,490 mm, Full-container reach stacker Chassis number: 145202 Mast type: Telescopic Transmission: Liebherr hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-25 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 18.00-25 Kedpow N Tzrefx Ad Nsdg Rear tyre condition: 40 - 60% Description: Intermodal = Piggy Back Side shifter, Full cab, air conditioning, Central lubrication, camera

Year of construction: 1982, condition: ready for operation (used), Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Ksdpfxoxq Eybj Ad Nedg

Condition: excellent (used), power: 120 kW (163.15 HP), overall weight: 25,000 kg, Year of construction: 2017, Equipment: air conditioning, cabin, hammer hydraulics, hydraulics, LIEBHERR R924 LC ZSA/Auxiliary Hydraulics/Air Conditioning/2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of Manufacture: 2017 • Operating Hours: 13,376h • Weight: 25,000kg • Power: 120kW/163hp • Hydraulic slewing ring bushing NEW from Liebherr • Newly sealed by Liebherr • Hydraulic pump NEW from Liebherr • Hydraulic pump finely adjusted NEW from Liebherr • Particle filter NEW from Liebherr • Valves NEWly adjusted • Oilquick quick coupler • Mono boom • Central lubrication system • Auxiliary hydraulics hammer grapple • Auxiliary headlights • Cab protection • Panoramic view cameras • 85% track condition • Air conditioning • Heated seats • German machine • Ready for immediate use _____ You can also have the description in another language by Email • Our Services • • - Export declaration, customs registration, yellow temporary license plates, red customs license plates. • - Purchase of your used construction machinery or commercial vehicle Kdodsv U A R Njpfx Ad Njg • - We help with financing • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly changing and is always up-to-date on our website. • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sales subject to our terms and conditions.

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Kdodpfoxl E Afox Ad Nog

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 12,845 h, LIEBHERR LH30M. Year: 2018. Hours: 12,840. Four grapples. Solid tires. Hydraulic cabin. Industrial boom. Industrial stick with cylinder. With front grill. Very good condition. Kdsdexl Ex Tjpfx Ad Neg

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 Ksdpjxq A Dkjfx Ad Njdg 10,000 operating hours Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system 140 cm digging bucket

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Kdjdpswmbnpsfx Ad Njg Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1191, rotational speed (min.): 4,000 rpm, rotational speed (max.): 10,000 rpm, tool length: 210 mm, TECHNICAL DETAILS Largest workpiece diameter: 180 mm Module range: 1 - 5 Minimum number of millable teeth: 7 Milling head swivel angle: ±35° Resolution accuracy: 0.1 degrees Workpiece table load: 17 kN Tool data Kedpewmb Amefx Ad Njdg Infinitely variable tool speed range: 4,000 - 10,000 rpm Number of tool threads: 1 - 7 Tool diameter for generating grinding: max. 145 mm Tool diameter for form grinding: max. 175 mm Tool length: max. 210 mm Total tool travel in the V-axis: max. 200 mm Shift travel from machine center - plus (+) direction: max. 100 mm Shift travel from machine center - minus (-) direction: max. 100 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Maximum rated current: 65 A Fuses in the supply line: 80 A Ambient temperature: +15 °C - +38 °C Relative humidity: max. 90% at 20 °C Relative humidity: max. 50% at 38 °C Operating noise: 80 dB(A) EQUIPMENT - With counterholder - No dresser - CBN wheels only

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Ksdpfx Aom Avwzjd Nsdg Other used rack and pinion group cutters up to module 10 on request

Year of construction: 2020, condition: used, module 10 Kdsdpfx Adem Avwwj Nog diameter 180 mm Bore diameter 40 mm width 75 mm 2 weight 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Condition: used, functionality: unexamined, machine/vehicle number: LGPv 1420, Used Liebherr Laboratory Freezer Manufacturer: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Manufactured: 2016 Details: Capacity: 1427 litres External dimensions (W x D x H): 1430 x 830 x 2150 mm Internal dimensions (W x D x H): 1250 x 700 x 1550 mm Complete with 8 shelves, max. load 60 kg Temperature range: -10 to -26°C Energy consumption: 8.887 kWh/24h Dynamic freezing system with fan Automatic defrost With lock and on castors Door, steel-white Weight approx. 219 kg Ksdjxiw Uuspfx Ad Nodg

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Liebherr 924 Litronic machine for sale. The equipment is from 2007 Kdsdpspq R Sxefx Ad Neg

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Kdjdpot Hwrujfx Ad Njg Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 Kdjdpot Hw R Dsfx Ad Neg _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t Ksdpfot Hwu Aex Ad Nsdg dimensions of the machine ca. m

Condition: ready for operation (used), Specifications Manufacturer LIEBHERR Model LC 502 CNC Year 1984 Condition Used Serial Number 0501/5 Kdjdpfx Asxqmbtod Nsg Stock Number DCR1746 Max working diameter 500 mm Max module 10 Table Diameter 400 mm Min number of teeth 8 Hob head inclination angle ±50° Hob speed revolution 480 rpm Description Equipment Retrofitted in 2011 CNC Siemens 840D

Condition: good (used), Liebherr GKv 6460-20K with Umluftkühlung Der Liebherr Gastronormkühlschrank Gkv 6460-20 with Umluftkühlung is suitable for the Gastronorm GN 2/1 produced. Repairer: Liebherr ProfiLine Gastronormkühlschrank Gkv 6460-20K / 001 Automatic Abtauung Tür- und Temperaturalarm Digital Display Feuchtigkeit in 2 Stufen Dichtung wechselbar Schloss ohne Schlüssel Türanschlag wechselbar SwingLine Tür mit Stangengriff Stand füße high adjustment bar Weiße Roste, up to 60 kg Cleaning sablauf Fugenlos Innen weiß Kunststoff Gastronome GN 2/1 Umluftkühlung Temperature range +1°C to +15°C °C Gross volumes: 663 liters Kühlmittel: R 600 a Connection: 220-240 V ~50 Hz Inner size (HxWxD) 1710 x 650 x 581 mm Dimensions (HxWxD) 2064 x 750 x 750 mm Height Stellfüsse: 150-180 mm Weight: 96.0 kg Kdsdpfoxg Ihmjx Ad Nsg More articles - new and used - can be found in our online shop! International shipping costs on request!

Condition: excellent (used), Liebherr Gastronorm Refrigerator with Convection Cooling The Liebherr Gastronorm Refrigerator GKV 6460-20 is designed to fit the Gastronorm GN 2/1. Manufacturer: Liebherr ProfiLine Gastronorm Refrigerator Gkv 6460-20 Automatic defrosting Door and temperature alarm Digital display 2-level humidity control Replaceable seal Lock Kjdjxg H Aispfx Ad Njdg Reversible door hinge SwingLine door with bar handle Height-adjustable feet Galvanized shelves, up to 60 kg Cleaning system Seatless White plastic interior Gastronom GN 2/1 Convection cooling Temperature range +1°C to +15°C Gross volume: 663 liters Coolant: R 600 a Connection: 220-240 V ~50 Hz Interior dimensions (HxWxD) 1710 x 650 x 581 mm Exterior dimensions (HxWxD) 2064 x 750 x 750 mm Height of adjustable feet: 150-180 mm Weight: 96.0 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, mileage: 78,500 km, power: 270 kW (367.10 HP), first registration: 07/2003, fuel type: diesel, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 06/2026, brakes: retarder, color: red, gearing type: automatic, Equipment: ABS, crane, I am offering our Liebherr LTM 1060 here. The crane is in very well-maintained condition as it has always been stored indoors. All maintenance has been carried out regularly. * Operating hours: 19,464 Ksdoxl Nkaspfx Ad Nodg * Tyre size: 16.00R25 * Suspension: hydraulic * Differential lock * Axle load: 12,000 kg * Max. lifting capacity: 60 tonnes * Automatic transmission with retarder * This is a German crane Get in and start working. Errors and misprints excepted.

Condition: used, axle configuration: 3 axles, first registration: 11/2008, suspension: air, tire size: 385/65r22.5, wheelbase: 1,300 mm, Year of construction: 2008, Applicable material: Concrete Tyre size: 385/65r22.5 Kdsdpfx Adeuc Ekie Nsg Suspension: air suspension Drive: Wheel Empty weight: 9.440 kg Carrying capacity: 28.060 kg GVW: 37.500 kg Make of bodywork: LIEBHERR

Condition: used, axle configuration: 2 axles, first registration: 03/2013, suspension: air, tire size: 425/65R22.5, wheelbase: 1,320 mm, Year of construction: 2013, Applicable material: Concrete Suspension: air suspension Rear axle 1: Tyre size: 425/65R22.5 Rear axle 2: Tyre size: 425/65R22.2 Drive: Wheel Empty weight: 7.360 kg Kedpfx Adsuc Az So Nedg Carrying capacity: 31.040 kg GVW: 38.400 kg Make of bodywork: LIEBHERR

Condition: used, axle configuration: 2 axles, first registration: 07/2009, suspension: air, tire size: 425/65R22.5, wheelbase: 1,310 mm, Year of construction: 2009, Applicable material: Concrete Tyre size: 425/65R22.5 Suspension: air suspension Ksdpfjuc Enzex Ad Nsdg Drive: Wheel Empty weight: 8.420 kg Carrying capacity: 27.580 kg GVW: 36.000 kg Make of bodywork: LIEBHERR