Used Kasto Kastossb A 2 for sale (141)

Condition: used, cutting diameter 210 mm band length 350 mm Dcsdpswu Hinofx Ac Hep capacity 90 degrees: square 190 x 190 mm capacity 90 degrees: flat 210 x 125 mm total power requirement 2,5 kW weight of the machine ca. 0,85 Kg dimensions 2,15 x 1,35 x 1.5 m Hydraulic hacksaw with: - Coolant system - Emergency stop device

Year of construction: 2020, condition: as good as new (ex-display), Band saw machine Make: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine No.: 6151 101 006 with warranty standard equipped with: - infinitely variable cutting speed 20 - 110 m/min - horizontal vice, manual clamping - Infinitely variable miter adjustment (-45° to +60°) - Infinitely variable saw band arm adjustment - Adjustable saw feed via own weight - Cutting bar as material support - Automatic switch-off after end of cut - Coolant system - Operating instructions with the following options: Dcjdpedur E Ajfx Ac Hop - Drip oiler

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm Djdevf N Suspfx Ac Hjcp weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Dcjdpfx Acsxg Rhve Hep

Condition: used, Manufacturer: KASTO Model: SSB 260 VA Dedpfx Aexcnppjc Hscp Max. cutting size: 260 x 260 mm / Diameter: 260 mm Weight: 1915 kg

Condition: used, machine/vehicle number: 102 039 1024 07265, cutting area at 90° round: 245 mm cutting area at 90° flat: 220 x 240 mm cutting area in mitre at 45°: 150 mm saw blade measures: 400 x 31 x 2 mm Dedpfocd Tmysx Ac Hjcp stroke speeds: 55 - 155 /min electrical connection: 380 V, 1,1 kW space needed: 1200 x 650 x 1250 mm weight: 340 kg

Condition: used, Year of construction: 1978, cutting diameter 170 mm band length 350 mm capacity 90 degrees: square 160 mm capacity 90 degrees: flat 170 x 220 mm total power requirement 0,85 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 1,0 m Djdpfxer H Nnvo Ac Hecp Hydraulic hacksaw with: - Coolant device

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Dcsdpfx Acetqdvgo Hop Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm Djdpew N S Ecofx Ac Hscp

Condition: good (used), Year of construction: 2007, total height: 700 mm, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Control panel  Memory 99 program with  Dcodpjw R Squsfx Ac Hep Bundel clamp device  New price 45.000 Capacity 90°:260° Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Dcjdpfxowvbk Ao Ac Hop *

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm Djdpfx Aoz N Amec Hscp cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, Year of construction: 1993, cutting diameter 260 mm cutting width 400 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm Dsdpfev T Nrkex Ac Hjcp weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Dcsdpfx Ajwuqbbec Hep Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min - Hydraulic lifting/lowering of saw frame Djdpfxjxc Hine Ac Hocp - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm - Weight approx.: 2,800 kg

Condition: good (used), Year of construction: 2011, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Touch screen 6.4" color screen Dedpfxjw Ryg Ro Ac Hscp Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°: 260° Cutting flat 90°: 260 x 260mm Feed single stroke: 750mm Feed multiple stroke:7500mm Min. cutting length:100mm Cutting speed Vario:20 - 110 Circle blade size: 4530 x 34 x 1,1mm Power: 5kW Length: 1800mm Width: 2150mm Height: 1600mm Weight: 1700kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 2,200 kg, cutting range square steel at 90°: 260 mm, saw blade length: 4,115 mm, Automatic Bandsaw Kasto Ssb 260 Va Model: Ssb 260 Va Year: 1998 Cutting capacity Ø 260 mm Dcjdoxf Hr Ijpfx Ac Hsp Main motor power: 4 kW Automatic feed stroke: 600 mm Cutting capacity (square): 260 x 260 mm Blade dimensions: 4,115 x 41 x 1.3 mm Total weight: 2,200 kg Complete with: New saw bands Internal code: svr 323

Condition: good (used), Cutting area at 90° round: 320 mm Cutting area at 90° flat: 320 x 200 mm Cutting area mitered at 45°: 210 mm Saw blade dimensions: 500 x 40 x 2 mm Stroke speeds: 11, 19 and 32 /min Electrical connection: 380 V, 2.2 kW Space required: 1700 x 750 x 1320/1560 mm Weight: 525 kg Dcsdpfx Acjvxpn As Hep

Condition: used, Year of construction: 1994, cutting diameter 260 mm cutting width 400 mm Dcsdjxf I Uqepfx Ac Hsp capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min Dsdpjwpincofx Ac Hscp - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 1995, Cutting area at 90° round: 280 mm Cutting area at 90° flat: 260 x 240 mm Cutting area mitered at 45°: 170 mm Dcsdpfxev D E I As Ac Hep Saw blade dimensions: 450 x 40 x 2.7 mm Electrical connection: 380 V, 2/2.8 kW Space required: 1700 x 700 x 1400 mm Weight: 540 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm Djdpfju H Acysx Ac Hecp - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg Dcedodbp Eqspfx Ac Hjp

Condition: good (used), Year of construction: 1997, machine/vehicle number: 3514101038, Offer 24534 Technical Data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 185 mm Dodpfx Aowp E Tbsc Hocp - Cutting range at 350 mm saw blade diameter - at 90°: round 100 mm flat up to 170 x 90 mm - at 45°: round 95 mm flat 125 x 90 mm - Mitre adjustable - Left up to 60° / Right up to 45° - 2 saw blade speeds 36 / 72 1/min - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Required space approx. W 700 x H 1700 x D 800 mm - Weight approx. 450 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm Dcjdjwzu A Aepfx Ac Hep - Weight: approx. 380 kg