Used Hyundai Generator for sale (139)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Rcjdpfxezimp Us Adqsd Technical Specification Taper Size BT 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2012, spindle motor power: 15,000 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 580 mm, total height: 2,225 mm, total width: 1,725 mm, bar diameter (max.): 65 mm, overall weight: 4,570 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 3,039 mm, workpiece diameter (max.): 335 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details. Redpfx Adezimmgjqscd Control Unit: FANUC Series 18i-TBVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 33 kVAFull Load Current: 51 AControl Voltage: AC 110 V / DC 24 VSwing Over Bed: Ø630 mm (24.8")Swing Over Carriage: Ø390 mm (15.4")Max. Turning Diameter: Ø335 mm (13.2")Max. Turning Length: 455 mm (17.8")Bar Capacity: Ø65 mm (2.6")Chuck Size: Ø210 mm (8")Spindle Bore: Ø76 mm (3")Spindle Speed Range: 45–4,500 rpmSpindle Motor (Continuous): 15/11 kW (20/15 HP)Spindle Motor (Maximum): 25.4/18.5 kWSpindle Torque (Continuous): 254.2 NmSpindle Torque (Maximum): 597.7 NmSpindle Nose: A2-6Rapid Traverse X/Y: 24/24 m/minRapid Traverse Z: 18/12 m/minSlide Type: Box GuideTurret: BMT65OD Tool Size: □25 × 25 mmID Tool Size: Ø50 mm (2")Indexing Time: 0.2 sec/stepX-Axis Motor: 5.5/3.7 kWZ-Axis Motor: 5.5/3.7 kWTorque: 5,000 NmCoolant Tank Capacity: 220 L (58.1 gal)Lubrication Tank Capacity: 0.9 L (0.5 gal)Power Requirement: Over 35 kVAMain Spindle Chuck: Samchully MH-208Sub Spindle Chuck: Samchully HS-06Chuck Jaws optional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), functionality: fully functional, load capacity: 1,800 kg, lifting height: 4,375 mm, free lift: 1,280 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,110 mm, power: 50 kW (67.98 HP), motor manufacturer: Hyundai, gearing type: converter, DGUV certified until: 07/2027, fork carriage width: 1,040 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 6,5 x 10-12PR, rear tire type: superelastic tires (black), rear tire size: 5,0 x 8 -10PR, empty load weight: 3,180 kg, total height: 2,110 mm, total length: 2,263 mm, color: yellow, Equipment: UVV, lighting, sideshift, HYUNDAI LPG forklift, 1800 kg load capacity with 4299 operating hours Triplex full-free-lift mast Side shifter Rcodoznlvwopfx Adqod Price plus 19% VAT Transportation can be arranged Rental available nationwide.

Condition: used, Year of construction: 2026, 2026 | Hyundai HX17AZ | Used Mini Excavator < 7t 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Rcodpfxozh Ictj Adqod 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41078 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2026, operating hours: 6 h, 2026 | Hyundai HX17AZ | Used Mini Excavator < 7t | 6 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Rcjdpfxozh Icae Adqod 💰 Buy Now for EUR 30000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41079 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Rsdpfswybg Sex Adqjcd Parts shown by hand not come. Technical details shown on pictures.

Condition: used, Year of construction: 2018, operating hours: 3,054 h, Hyundai HW 180 Mobile Excavator, Year of Manufacture: 2018, Operating Hours: only 3,054 hours!, HS10 hydraulic quick coupler, hydraulic trencher, blade support, adjustable boom, hammer and shear hydraulics, camera on the right, left, and rear, radio, air conditioning, Engine: [127 kW/173 hp], Weight: 18,770 kg, in good condition, ready for use!, Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Quick-change device Rcedpfxozmlmms Adqod = More information = Drive: Wheeled Contact Tobias Ebert for more information.

Condition: used, Year of construction: 2020, operating hours: 6,102 h, Hyundai HW 180 mobile excavator, year of manufacture: 04/2020, operating hours: only 6,102 hours!, OilQuick OQ70/55 quick coupler, 1,200 mm digging bucket, blade support, adjustable boom, hammer and shear hydraulics, camera on the right, left, and rear, radio, air conditioning, engine: [127 kW/173 hp], weight: 18,770 kg, good condition, ready for use!, Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Quick coupler Rcodpfx Aezmcubjdqjd = More information = Drive: Wheeled Please contact Tobias Ebert for more information.

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 1,687 h, Drive: Track Empty weight: 1.820 kg Track width: 23 cm Dimensions of cargo space: 384 x 100 x 230 cm Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: KR Please contact Vink Machinery for more information = Additional options and accessories = - Auto / hydraulic quick coupler - Standard digging bucket = Remarks = Hyundai Robex 16-9 Rcodpfozd Rg Tex Adqsd * Year of manufacture 2015 * 1,687 operating hours * Diesel drive * Hydraulic quick coupler * Includes 2 digging buckets 0.3 and 1 meter wide * Includes pallet forks * 1,820 kg own weight

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Rodpfszfx Tksx Adqscd Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). Rsdozd D Nuopfx Adqscd 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis).

Condition: used, power: 109 kW (148.20 HP), fuel type: diesel, axle configuration: 4x4, first registration: 06/2012, Year of construction: 2012, Equipment: all wheel drive, onboard computer, = Additional Options and Accessories = - Central lubrication system = Further Information = Number of cylinders: 6 Engine displacement: 6,700 cc Unladen weight: 12,000 kg Rsdpfsy Tw Npsx Adqscd Dimensions (L x W x H): 723 x 255 x 326 cm Chassis type: Articulated Loading shovel capacity: 2 m³ Registration number: TJD-40-J Please contact Vitali Lenda for further information.

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm Redpezd Dizofx Adqocd • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: used, Year of construction: 2010, operating hours: 7,340 h, Equipment: all wheel drive, MAKE: HYUNDAI TYPE: ROBEX 140W-7A YEAR: 2010 CE MARKING: YES OPERATING HOURS: 7340 HOURS TIRES/UNDERCARRIAGE: 80% POWER: 89KW ENGINE: MITSUBISHI D04FD WEIGHT: 14,900 KG OPTIONS: TRIPLE BOOM DOZER BLADE Rcsdpfx Adjzh Uptsqod HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,795 h, load capacity: 3,000 kg, lifting height: 4,705 mm, free lift: 1,330 mm, fuel type: electric, mast type: triplex, construction height: 2,245 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,165 kg, total length: 2,500 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Rodev Ih Dnspfx Adqjcd Front tires type: Non Marking Front tires size: 23x9-10 Front tires condition: 60 - 80% Rear tires type: Non Marking Rear tires size: 18x7-8 Rear tires condition: 80 - 100% Battery voltage: 80V Battery Ah: 700Ah Battery manufacturer: FIAMM Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Full cabin with heating, work lights front + rear, 3rd + 4th valve to fork carriage, BlueSpot rear, rotating beacon, reversing alarm, hand lever side shift, integrated side shift 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, safety light, non-marking tires, interior mirror, rotating beacon, windscreen wiper, seat,

Condition: good (used), functionality: unexamined, machine/vehicle number: 17010165, Year of construction: 2017, operating hours: 420 h, load capacity: 1,200 kg, lifting height: 3,300 mm, power: 1.2 kW (1.63 HP), battery voltage: 24 V, DGUV certified until: 05/2026, empty load weight: 700 kg, color: yellow, 200 kg load capacity 3.3 m lifting height Year of manufacture: 2017 Only 420.6 operating hours Includes charger UVV certification valid until 05/2026 Ready for immediate use Rodpfxozibv Aj Adqocd The last inspection was in May 2025; all inspections and repairs were carried out up to that point.

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 5,710 h, Equipment: air conditioning, Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Digging depth: 5.25 m Rcedpfx Adszb Nanoqed Bucket volume: 0.27 m^3

Condition: good (used), functionality: fully functional, Year of construction: 2011, load capacity: 7,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: duplex, construction height: 3,300 mm, gearing type: automatic, fork length: 1,800 mm, empty load weight: 10,280 kg, total height: 3,300 mm, Equipment: pallet forks, sideshift, MACHINE: Forklift BRAND: Hyundai MODEL: 70D-7E YEAR OF MANUFACTURE: 2011 ENGINE: Diesel TRANSMISSION: Automatic MAST: 2-stage ATTACHMENT: Side shift and fork positioner LIFT CAPACITY: 7000 kg LIFTING HEIGHT: 4700 mm TRANSPORT HEIGHT: 3300 mm HYDRAULIC VALVES: 4 FORKS: 1800 mm Rjdozhna Sjpfx Adqscd TIRE TYPE: Solid, standard CONDITION: Normal

Condition: used, Year of construction: 2024, operating hours: 118 h, functionality: fully functional, turning length: 2,050 mm, turning diameter over cross slide: 600 mm, turning diameter: 550 mm, spindle motor power: 15 W, spindle speed (min.): 4,000 rpm, spindle bore: 116 mm, travel distance Z-axis: 2,050 mm, 2024 MODEL CNC LATHE HYUNDAI WIA 400 LMC C-AXIS (4 LIVE TOOLS) OPERATING HOURS: 118 HOURS BAR CAPACITY: 116 MM MACHINE IS CLEAN AND WELL-MAINTAINED. Rcsdozlux Nepfx Adqed NOTE: THE MACHINE WILL BE AVAILABLE IN STOCK IN ISTANBUL ON JULY 20TH.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 350 [mm] - Max. diameter on bench : 550 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 33 [mm] - Z stroke : 750 [mm] TURRET 1 Rcjdpfxey N Ecvo Adqjd - Number of positions : 12 - Live tools speed : 4500 [rpm] - X/Z stroke : 210 / 330 [mm] POWER SUPPLY - Supply voltage : 330 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2070 x 1650 [mm] - Machine weight : 3900 [kg] MACHINE HOURS - Number of hours under power : 32645 [h] - Number of working hours : 6498 [h] EQUIPMENT - CNC : Fanuc Series Oi-TC - Coolant tank - Chips conveyor - Parts catcher

Condition: used, mileage: 156,000 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2023, color: white, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Due to the large number of unreliable emails, not all emails will be answered. WhatsApp available. Hand-written service booklet available. Rjdpfozgqpasx Adqecd The vehicle is in daily use, so the mileage may vary. "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED."

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Rcsdex Thzvopfx Adqjd Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES Redpfjx Thu Nsx Adqjcd SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM Rcjdpfex Tqppjx Adqed MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Redpox Tqkmefx Adqecd Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE