Netmus

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Nledpfx Aezgblrjmujc Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, power: 2 kW (2.72 HP), rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder Nedpfx Ajzdf Ruomuelc 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, Double-shaft shredder Drive 37.50 KW Njdpjzddq Tofx Amuelc

Condition: good (used), Year of construction: 2018, operating hours: 6,000 h, functionality: limited functionality, machine/vehicle number: 88, ARJES VZ 850DK PRE-SHREDDER, a mobile, heavy-duty, dual-shaft slow-speed shredder, designed for the pre-treatment of bulky, mixed, and difficult materials in industrial recycling applications. • Type: mobile dual-shaft shredder (pre-shredder) • Application: pre-shredding of bulky waste, scrap metal, wood, green waste, and industrial materials • Status: available for inspection • Current condition: in operational condition for industrial use, except for the screen The system is designed for high-torque, low-speed shredding, which allows for efficient size reduction of large and heterogeneous materials before further processing. Its robust design enables continuous operation under demanding recycling and waste treatment conditions. The dual-shaft configuration ensures powerful material feeding and reliable shredding performance, even with contaminated or large-sized materials, reducing volume and improving manageability for subsequent separation or processing stages. Nsdpfx Aezcmq Tjmujlc The equipment is suitable for recycling plants, waste treatment facilities, and scrap metal processing operations, where primary size reduction is required to optimize material flow and recovery.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,710 mm, total width: 1,270 mm, total height: 1,850 mm, overall weight: 2,300 kg, warranty duration: 12 months, hopper volume: 750 l, rotor diameter: 276 mm, rotational speed (max.): 14 rpm, blade width: 20 mm, power: 15 kW (20.39 HP), rotor width: 800 mm, Genox M800 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. Nodpfx Ajza Apysmujlc The machine is equipped with twin 7.5kW (15kW Total Power) drive motors and oversized, heavy duty reduction gearboxes providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Nodpfxoza Apmo Amuslc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,150 mm, total width: 2,210 mm, total height: 2,600 mm, overall weight: 11,400 kg, warranty duration: 12 months, hopper volume: 2,000 l, rotor diameter: 515 mm, rotational speed (max.): 15 rpm, rotational speed (min.): 5 rpm, blade width: 50 mm, power: 90 kW (122.37 HP), rotor width: 1,600 mm, Genox X1600 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Nodpfxoza Apge Amujlc Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 45kW (90kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 3,050 mm, total height: 4,000 mm, overall weight: 32,450 kg, warranty duration: 12 months, hopper volume: 4,000 l, rotor diameter: 750 mm, rotational speed (max.): 12 rpm, rotational speed (min.): 5 rpm, blade width: 75 mm, power: 150 kW (203.94 HP), rotor width: 1,800 mm, Genox X1800 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 75kW (150kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Nlsdoza An Ajpfx Amuoc Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: used, Shredder, Hammel 950 E type, electric Includes overband magnet and long conveyor belt. Completely overhauled, like new! Gearbox completely overhauled! Optionally available with shafts for wood, waste, or metals. Request a quote. Disclaimer: The images are sample images of the machine in its overhauled condition. Njdpfxsza Addj Amuelc

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, overall weight: 47,000 kg, power: 522.2 kW (709.99 HP), fuel type: diesel, color: red, number of blades: 10, motor manufacturer: CAT, motor model: CAT C18, Rollers with 10/10 discs, each with 8 blades Crushing bar with comb Chain shoes Permanent overband magnet Nlsdpjy Uh N Aofx Amusc Water spray system Radio remote control

Condition: ready for operation (used), Year of construction: 1999, EUREC Model Z85 Twin-Shaft Tracked Shredder, complete with folding discharge conveyor Year: 1999 Weight: 32 tons Dimensions: Nljdpfey Id I Iox Amusc Shredder feed opening width: 2.30 m Shredder feed opening length: 1.80 m Shaft length: 1.85 m Conveyor length: 8.60 m Conveyor width: 1.40 m Hopper length: 5.40 m Hopper width: 2.50 m Engine: CUMMINS 6-cylinder turbocharged, 462 hp Engine power: 336 kW Complete with documentation Ideal for the following materials: waste, plastics, wood, light metals, bulky waste, aluminum, sheet metal, etc.

Condition: used, Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9, Field of application: waste wood and fresh wood, household and bulky waste, electronic scrap Shafts with 7/7 discs, 5 knives per disc Breaking bar with comb Robust hooklift frame Nlsdpsy Akb Rofx Amujc Axle unit with drawbar Permanent over-belt magnet Radio remote control

Condition: excellent (used), Year of construction: 2021, operating hours: 1,450 h, functionality: fully functional, total length: 10,900 mm, total width: 2,550 mm, total height: 3,200 mm, overall weight: 25,500 kg, rotor diameter: 680 mm, rotational speed (max.): 31 rpm, rotational speed (min.): 18 rpm, blade width: 60 mm, torque: 240,000 Nm, power: 257.42 kW (349.99 HP), Equipment: rotational speed infinitely variable, Lindner Miura 1500DK – Twin-shaft Shredder Technical Data: - Year of manufacture: 2021 - Operating hours: 1,450 h Drive: - Engine manufacturer: Scania - Engine type: DC09 - Engine output: 257 kW - Fuel: Diesel Shredding System: - Twin-shaft shredder - Hydraulic direct drive (load-dependent control) - Torque: up to approx. 240,000 Nm Chassis / Weight: - Crawler tracks - Total weight: approx. 25,500 kg Equipment: - Dust suppression system - FX quick-change system for shafts Input Material: Nsdpfxeyzdvfs Amujlc - Green waste - Waste wood - Root stocks - Bulky waste

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,400 mm, total width: 1,440 mm, total height: 3,000 mm, overall weight: 6,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 90 kW (122.37 HP), rotor length: 1,080 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? Nedoyypp Ijpfx Amuslc • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,620 mm, total width: 1,050 mm, total height: 2,700 mm, overall weight: 2,600 kg, warranty duration: 12 months, blade width: 45 mm, power: 30 kW (40.79 HP), rotor length: 520 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. Nljdpfx Amsyypn Reujc MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Nedpfxsyx Nlys Amujlc Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW

Condition: refurbished (used), Year of construction: 2007, Refurbished Eurec S20.00 with Scania engine. Shafts and screen overhauled. New remote control. Serviced. 4800 operating hours. Nljdjyxxmmspfx Amuec

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2015-26004, power: 5.5 kW (7.48 HP), 1.3 Fine Crusher System FB 1000 DS1 Fine Crusher FB 1000 DS1 FG3 Drive power: 5.5 kW + 3.0 kW Design: 1 x cutting roller with spike discs (upper) 1 x dosing roller with spike discs (lower) Maximum processable panel thickness: approx. 100 mm Maximum processable density: 50 g/liter Clear width: 1000 mm Infeed height from conveyor belt: 180 mm Additional protective cover on conveyor belt (site-installed) Nlsdjyvfhwopfx Amuoc Screw conveyor discharge for Fine Crusher FB 1000 DS1: Drive power: 0.75 kW Intake nozzle: NW 200 mm Incl. maintenance hatch with safety switch

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Nsdpfjyuvr Rsx Amuslc

Condition: new, Year of construction: 2026, Shredding shafts with side combs for Arjes 850 D/DK synchronized, in Hammel design, 6-piece, 9-9 discs for wood / green waste / refuse / commercial waste / tires, etc. -- NEW -- Nedpfjyt Icxex Amuolc

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Nledpfjytdkfex Amusc Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Nledpfx Aoyr Tpujmujc Weight: 2900 kg

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features Nodpfxeyr Tlpj Amuolc The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Njdpfeyrfgrox Amujlc Includes: control cabinet, frame & hopper

Condition: new, Year of construction: 2026, operating hours: 5 h, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. Nlodeyf Ni Depfx Amujc The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars