Folder gluer

VEGA 700 FOLDER GLUER

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Kodpfx Ajwk I Iqjf Sjnf Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Knsdpfxov T T N Ho Af Sjf Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: used, Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Kodpfx Afev H D Srs Sjnf Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2024, functionality: fully functional, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) Details : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Ksdowff Spjpfx Af Sjnf Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER Knodpfxsxl Tals Af Sof - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm Knodper Hmtkofx Af Sef MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V WORKING TABLE: 1000 x 2000 mm DIMENSIONS: 2400 x 1000 x 1700 mm WEIGHT: 230 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, TUNKERS Proliner - VKM 1150 Machine in production, can be inspected in Bucharest, Romania. Technische Daten_GE/ Technical Data_EN Allgemeines/ General Anlagenbezeichnung : Vollautomatische/ Plant designation : Fully automatic Bogenkaschiermaschine/ Sheet Laminating Machine Maschinenname/ Machine name : Proliner VKM 1150, TVA, PW, AS-12 Fabriknummer/ Factory number : 3.9000.1150.001 Auftragsnummer/ Order number : 70224 Baujahr/ Construction year : 06/2005 Deckbogeneinleger/ Cover sheet insert Bogenformate/ sheet formats Formatbereich Länge max./ Format range length max. : 1600 mm Länge/ Length, min. : 400 mm Breite/ Width, max. : 1150 mm Breite/ Width, min. : 400 mm Knedpfopkx S Dsx Af Sjf Materialstärke/ Material thickness, min/max. : 100/500 g/m2 Stapelgewicht/ Stack weight max. : 2.500 kg Stapelhöhe inkl. Palette/ Stack height including pallet : 1500 mm Trägerbogeneinleger/ Carrier sheet insert Bogenformate/ Sheet formats Formatbereich Länge/ Format range length, max. : 16400 mm Länge/ Length, min. : 400 mm Breite/ Width, max. : 1250 mm Breite/ Width, min. : 400 mm Materialstärke/ Material thickness, min . : 250 g/m2 Materialstärke/ Material thickness, max : 8 mm Stapelgewicht/ Stack weight ,max. : 500 kg Leimstation/ Glue station Leistung (format- und materialabhängig)/ Performance (depending on format and material) : 5000 Bögen/Std Gewicht/ Weight : 800 kg Kaschierstation/ Laminating station Deckmaterial/ Cover material, min : 250 g/m2 Deckmaterial/ Cover material, max : 8 mm Leistung/ Performance : 5000 Bögen/Std Gewicht/ Weight : 1150 kg Elektrik/ Electrics Betriebsspannung/ Operating voltage : 400 V AC Steuerspannung/ Control voltage : 24 V DC Ventilspannung/ Valve voltage : 24 V DC Frequenz/ Frequency : 50 Hz Antriebsleistung/ Drive power : 40kW Gesamtleistung/ Overall performance : 50 KW Pneumatik/ Pneumatics Druckluft/ Compressed air : 6 bar Verbrauch/ Consumption, max. : 450 m /Std

Condition: good (used), Year of construction: 1998, functionality: fully functional, In Production SWEDEN; year: 1998 Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, The machine was technically sound at the time of dismantling. Cleaned. Dismantled. Knedpfx Asv Ta Txjf Sof

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Knsdpfew Hrrrex Af Sjf Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt