SIPA SFR 8 EVO Blow Moulder (2008)

SIPA Blasmaschine

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  - Capacity: max. 30,000 l/h beverage   - 6-component mixer  - Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   - Flow meter  - Dosing pump  - Vacuum degassing  Hjdpfx Asvcp U Rodqjr - Brix measurement  - CO2 measurement  - CO2 pressure control  - Conductivity measurement   - Electrical data  - Operating voltage 400V/230 V 50 Hz  - Control voltage 42V AC 

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm Hodpfoytqzwox Adqsr - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD Hjdpfx Ajzcga Uedqsr - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2001, Combined de-capper for screw tops and crown caps. Combined unscrewer and uncorker. Equipped with 2 unscrewing and one uncorking hoods. The machine is operated with 2 hoods installed at the same time, which corresponds to 4 unscrewing/decorking heads. Velocity of the crate conveyor: 0,6 m/s. Capacity: 40000 bo/h Pneum. working pressure: 10 bar Power: 11 kW Current: 25 A Voltage: 230/400V, 24V control voltage Frequency: 50 Hz Length: 2900 mm Width: 1260 mm Height: 2000 mm Formats: 0,5 l NRW, 0,5 l Euro, 0,33 l Steinie, screw caps and crown caps Operation / Control: Simatic S7 Hsdpfexbqg Uox Adqor Features: 2 Hoods with 2 heads each for screw tops,1 hood with 2 heads for crown caps, crate transport conveyor, crate lock with initiator, limit switch, cork detection, hydraulics, light barriers, hydraulic valve, door switch, compressed air connection, control cabinet