Mesh welder

Schlatter MG24

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV Fedpfx Ajv Ed Ansbreft - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm Ffodpfxeuv Eg Hj Abrjt - machine is operated by two workers

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Fedpfxswu Tu Ds Abreft Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Fodpfx Abetvpiljreft We also have a number of single point welding machines for steel wires.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,600 kg, color: white, total length: 1,400 mm, total width: 1,300 mm, total height: 2,225 mm, The EnergyCore EC-100&230 energy storage (100 kW, 230 kWh) is an all-in-one solution ideal for industry, RES farms and data centers. It offers high efficiency, safety and reliable energy management with an advanced Production plants Thanks to its ability to respond quickly to fluctuations in energy demand, production plants can avoid costly downtime. It increases power reliability and enables more efficient use of renewable energy. Industrial companies The EnergyCore EC-100&215 energy storage supports the stability of the power supply in large industrial plants, reduces energy costs during peak periods and increases operational efficiency. Ideal for managing excess energy and supporting production processes. Data centers Provides reliable power supply during power outages, which is critical for the continuity of data center operations. The energy storage acts as a support for the UPS and offers additional protection against failures and power stability under high loads. Photovoltaic and wind power systems The EnergyCore EC-100&215 enables the efficient storage of excess energy generated by renewable sources such as photovoltaic and wind power systems. It maximizes self-consumption, minimizes energy losses and promotes sustainable resource management. INNOVATIVE APPROACH Mobile app for Proton energy storage Modern Proton energy storage - maximum efficiency and long service life Energy storage from Proton is based on the innovative LiFePO4 technology, which enables high current efficiency and an extremely long service life with several thousand charge and discharge cycles. LiFePO4 batteries have a high energy density, so that large amounts of energy can be stored in the smallest of spaces. In addition, these cells have a low self-discharge rate and are immune to the "memory effect" that occurs with older battery types such as Ni-Cd, Ni-MH or AGM We have been in business since 2007 (over 17 years) Under what conditions can our energy storage units be operated? Single-family homes Restaurants Hotels Office spaces Farms Fedpfjvuhuaox Abrsft Server rooms Public facilities Production facilities Universities and technical colleges Anywhere where constant access to electricity is required - The customer service office is available on weekdays from 8 a.m. to 4 p.m. - The service department is available 24 hours a day (24/5) for our customers. If you have any questions or problems that require a quick response, the best way to contact us is by phone.

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm Ffedpfx Abovxq Eiorot FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Fsdpfx Abotwn Iperoft Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: used, functionality: fully functional, machine/vehicle number: D08E/8404, Offer Number: D08E/8404 Machinetype: straightening and cutting machine Info: overhauled Make: WAFIOS Type: R5 Constr. year: diameter range: 6-14 mm Fjdexnykcepfx Abreft cutting length: 6000 mm speed - meters/min: 23 - 90 Location: Europe

Year of construction: 2001, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible. Ffjdpjwfg Eqofx Abrot

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Fodpfx Abeunh Uvjrjft Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m