Screening plant for pellets, semi-mobile

S&F GmbH

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: Nkedpfx Asxtfv Ijaxjt - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm Nodpfx Aegwlrdjaxokt !! Gearbox has no oil cooler !

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Nkodpfxew Ad Rrs Aaxst Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Nksdpfjxk Tg Nex Aaxot Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 Nksdpfxog Stz As Aaxet RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity Nedjin Ey Sspfx Aaxokt - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Nkjdjinkw Aspfx Aaxjt Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Nksdpfji Artlsx Aaxet

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB Nkjdpjin Ewlefx Aaxot - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Nedpow I R Rnjfx Aaxokt Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Njdpfx Aji A Ix Hjaxjkt

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW Nodpfx Aswbv Erjaxjkt - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm Nkedpfx Aouz Hmxoaxot - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, gearmotor with brake, parallel shaft gear unit series F -Type: FH87/G DRN132M4/BE11HF/TF -Speed: 50 rpm -Power: 7.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm Nedpfovvblhox Aaxskt -Brake: 55 Nm -Quantity: 1 piece available -Price: per piece -Dimensions: 800/330/H530 mm -Weight: 190 kg