Used AMOS filling line for naturla juice 2500 Kg/h

RINK

Condition: used, Year of construction: 2012, Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in , is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Technical Data - Manufacturer: RINK GmbH & Co. KG - Machine Type: Empty bottle unscrewing machine - Model / Type: KM 690/4K - Year of Manufacture: Application: Unscrewing / removal of screw caps from returnable empty bottles inside crates - Equipment: 4 units, each with 4 x 3 unscrewing heads - Operation: Automatic crate transport under cyclic lowering unscrewing units - HMI / Control: Siemens SIMATIC Panel touch display - Signal Tower: Red / orange / green status light - Safety: Stainless steel enclosure with transparent sliding doors and safety warning labels - Electrical Supply: 230 / 400 V, 50 Hz Ljdpfszcgppox Ah Njah - Connected Load: 18 kVA - Current: 25 A - Condition: Used, installed in industrial returnable bottle line

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Crate formats: - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Laodpfx Aheytphco Neh Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: used, Year of construction: 2002, Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available.  Technical details - Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) - Format parts: - 5x centering plates for 0.7l GDB - 5x centering plates for 0.75 Gastro - 3x centering plates for 0.5l GDB/0.5l Euro - Crate conveyor speed: 0.6 m/s - Crate guide: All crates are moved lengthwise through the machine - Noise level: 83 dB(A) - Space requirement (LxW): 4,100 x 1,260 mm - Working area: min. 1,500 mm on the operating side - Hydraulics: Working pressure 150 bar, residual pressure 35 bar - Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½" Ljdpfx Ahjw Nk E Is Neah - Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 - Control: PLC control Siemens S7-300, HMI Simatic OP7

Condition: used, Year of construction: 2016, Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: - Capacity: app. 2.800 crates/h - Formats: - 0,7 l GDB in 12er crates - 0,5 l GDB in 12er crates Lodewigy Nepfx Ah Nsah - Crate dimension: - 356 x 275 x 257 mm (0,5 l GDB) - 356 x 275 x 346 mm (0,7 l GDB) - Electrical control - Siemens S7 control - Caps - For the decapping of aluminium and plastic caps, 28 mm

Year of construction: 2001, condition: ready for operation (used), A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible. Laedexxzihjpfx Ah Nsh

Condition: used, Year of construction: 1995, A cap remover for removing crown caps from bottles in beer crates. Two crates are uncapped per cycle. The removed crown caps fall into a tray positioned beneath the machine. Additional title: Cap remover for crown caps with 2 uncapping heads Capacity filling line: 12000 Fl/h Formats: crown caps Running direction: left -> right Ledpfx Aszg Iy Aeh Nsah Operation / Control: Simatic S5-95-U Position: in a footed stainless steel housing Base construction: straight-running Features: 2 uncorking heads, motorised crate transport, control cabinet with control buttons

Condition: used, Year of construction: 2001, Uncorker Manufacturer: Rink Model: KM 670/2K Year of manufacture: 2001 Additional title: cycled uncorker Capacity: 30000 Bottles/h Power: 6,5 kW Current: 10 A Voltage: 230/400 V Frequency: 50 Hz Length: 2800 mm Width: 1000 mm Height: 2300 mm Ledpfx Ahjw Ta D Uj Njah Formats: 0.33 l bottles, 0.35 l bottles, 0.5 l bottles, module box Running direction: from left to right Operation / Control: Simatic S5 Position: free standing Base construction: Square frame construction painted on dome feet Features: Crate transport, format sets/corker heads for 2x20 bottles and 2x24 bottles, housing with doors, protective grille, control cabinet with operating front, various spare parts Layer patterns: 2x20 bottles, 2x24 bottles

Condition: used, Year of construction: 2017, Descrewer / Decorker, make Rink, type: KM 740/2K, as crate-descrewer/-decorker, 2-head for screw cap 0,5 lt NRW in 20-bottle module crate, and 1 head for crown cap, built 2017 Laodpfx Aey Iz Aieh Nsh

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use Laodst Hfygspfx Ah Njh

Year of construction: 2026, condition: new, A modular system that you can easily adapt to your needs: * Mechanical or electric grinder * Packing press or basket press * Fruit presses in various sizes: 5 - 70 liters All home cideries offer: * Highest juice yield through hydraulics * Ergonomic and hygienic operation * Compact unit with mobile frame Laodpsuady Dofx Ah Noh RINK - home cideries - :according to your needs: * The Standard home cider makers include a manual fruit grinder and enable an hourly output of up to approx. 70 liters. * The Super home cider mills include a RINK scraper mill and enable an hourly output of up to approx. 150 liters.