Pneumatic bookbinding press

Prasa Introligatorska

Condition: excellent (used), Functionality: fully functional, Manual frame press Dqnnm7

Condition: excellent (used), Year of construction: 2010, Double chamber baler, waste balers, waste balers, waste compactors, waste compactors, paper baler Dqmrgn

Condition: ready for operation (used), Functionality: fully functional, working length: 220 mm, working width: 103 mm, total length: 165 mm, Pneumatic press brake - 6 batches Specifications: - condition - used - 6 working fields of 103 x 110 cm or 3 working fields of 103 x 220 cm - control panel for working fields ( 6 sections ) - pressing of the material is carried out by means of a fire hose Bto7Kmrotu - each field has a pressure bar against buckling of the glued element - overall dimensions 165 x 220 x 210 cm (L x W x H) Additional information: - good technical and visual condition - stable and strong construction - the quoted price does not include VAT and transportation costs

Condition: excellent (used), I will sell me on screw work in very good condition. Bsn3Kwngxo0

Condition: good (used), Year of construction: 2007, Functionality: fully functional, total height: 25,150 mm, back gauge travel distance Z-axis: 2,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge: 1,000 mm, installation height: 1,000 mm, pressing force: 50 t, total width: 18,200 mm, total length: 30,500 mm, overall weight: 5,500 kg, operating speed: 110 mm/s, distance between stands: 2,100 mm, table width: 60 mm, table height: 100 mm, bending length: 2,050 mm, retraction speed: 110 mm/s, warranty duration: 6 months, height adjustment type: electric, power: 0.011 kW (0.01 HP), Equipment: safety light barrier, Safan E-Brake 50-2050 press brake Offer for a press after a general technical overhaul fully operational and well equipped. The SAFAN E-Brake press brake has an electric drive. Lenze servomotors controlled by inverters of the same company, allow the system to work quickly and reliably for many working hours. SAFANDARLEY E-Brake has a patented method of power transmission, which is implemented using reinforced belts. The arrangement of rollers results in what is known as a "multi-brake" or otherwise known as a multi-pulley. The operation has been known for years, but in SAFANDARLEY presses successfully used since 1995 has made the press about 30% faster than hydraulic presses, quieter, environmentally friendly, no need to change oil in it. Parameters: SAFANDARLEY servo-electric press brake model E-Brake 50-2050 Pressure of 500 kN (50 tons) Slide stroke 290 mm Opening Q=590 mm Upper beam accuracy +/- 0.01 mm Max bending speed 10mm/s B7H9Ojy2V Max speed of bumper fingers 350mm/second Max reach of bumper fingers (third base point) 1000mm Connecting power 11kW Machine width 3030mm Machine depth 1775mm Machine height 2550 mm Weight 4,750 kg Servo-electric drive (without hydraulic system) SAFAN TS 1 - numerical controller - 13'' color touch screen - rotating stick - ELO Touch technology EASY 2D - 2D graphics program, overlay on TS1 controller CNC axes: Y1, Y2 - CNC controlled axes X - CNC controlled axis R - CNC controlled axis Z1, Z2 - CNC axes Safety light guard - programmable light curtain: Basic function- safety Intermittent operation function - 1 bar/2 bars Safety light curtains can be deactivated WILA NSCL I MC top adapter tool clamp, L=2040 mm Safan OBS/3 table bottom tool clamp type Wila or Amada table 60mm wide with 13mm groove, length 2040mm ALUMINIUM front supports, 2 pieces Each device is subject to full technical inspection and quality testing by authorized SafanDarley service.

Condition: good (used), I sell a pneumatic press. Umeugtzbxh

Year of construction: 1988, Condition: excellent (used), 2 front hydraulic rams Bzago70Kyg 2 side hydraulic rams Max working area 1650 x 2300

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0603188, total width: 5,500 mm, total length: 6,000 mm, total height: 6,000 mm, type of cooling: water, input voltage: 400 V, Short noodle machine S7Qnll2 ROLMARK Capacity - about 650kg (depending on assortment) Year of production - 2006 Matrices included: - Crimped worm - Spinner - Wider - 1000mm lobe

Condition: repair required (used), Year of construction: 1981, Functionality: limited functionality, machine/vehicle number: ST-42/421-45/2390, overall weight: 35,000 kg, Hot press for forming screws. The device has been out of service for several years due to failure to meet the technical parameters of the products. Made as one of three in the application of pilot technical solutions to improve the production process. Approx. 3 years "dry" commissioning trials were carried out. The trial demonstrated problems of operation as well as functionality. Device considered without peripheral devices. Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Bik83Jez Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address. Machines can be viewed by appointment by phone

Condition: new, Year of construction: 2023, New condition Delivery time - in stock price 49900 EUR Pressing force 100 tons P3I7Ldj Bending length 3100 mm Y1/Y2 axes/X and R axis Stroke 265 mm Distance between walls 2600 mm Throat depth 410 mm Hydraulic drive Lowering speed 210 mm/s Rotational speed 145 mm/s Rear bumper travel in the X axis 750 mm Rear bumper travel R axis 250 mm Table height 890 mm Engine power 7.5 kW Length 4320 mm Width 1795 mm Height 2630 mm Weight 7600 kg STANDARD EQUIPMENT: Hydraulic drive 4 axes (Y1, Y2, X and R) CYBELEC 12 colorful graphic controls - 17" color touch screen - 3D imaging in simulation and production - Suitable for full Windows applications - USB interface and peripheral interface - Support for user-specific applications Rear bumper driven by a servo motor on linear guides and ball screws CNC controlled crowning Top tool EUROSTAMP 1260, H:67, 85° R:08 (set 835mm x length) EUROSTAMP 2067 lower tool, 4 slots V=16-22-35-50mm, 85° H:60 (set 835mm x length) Fiessler AKASam laser safety device mounted on the upper beam Arms supporting the sheet on the linear guide Front and rear laser security system Equipment compliant with CE regulations User manual in POLISH, GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - higher productivity compared to classic hydraulic presses -low energy consumption - compact drive spindle assembly with few individual components Available immediately from stock.

Year of construction: 1995, Condition: reconditioned (used), Special press 63 tons Scv9Et0M9H

Condition: used, Year of construction: 1965, machine/vehicle number: ST-42/420-31/659, overall weight: 35,000 kg, 3 years back the commissioning was done, the electrics are in working order, helions replaced. (The device treated without peripherals). The technical condition as of the date of inspection and after obtaining additional information was determined as satisfactory. The device requires maintenance. Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Bsa02Z3Vxmk Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address The machines can be viewed after prior appointment by phone