Label die cutting machine

PMC 200

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Giodpfeu Umapsx Afaon Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. Gisdpfx Aexx Tbcjfaon • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 65951607, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 400 V, Koenig Bauer / KBA Rapida SRO 4 | 1988 | Offset printing machine Year: 1988 Format: 52x72 cm Colours - 4‑colour offset Gjdpfxewzt Tte Afaoin Speed -12,000 sheets/hour Paper Weight - 60–500 g/m² Feeder - Mabeg (± Technotrans) Inking Adjustment - Colortronic remote key Dampening - Technotrans / Varidamp (alcohol) Dryer - Infrared Powder Spray - Weko Cooling - Baldwin Cylinders Chromium-plated

Condition: used, Year of construction: 2010, format range from 15 1/2" to 30" with 1/ " print widths of up to 427 mm reel diameter in the unwinder up to 127 mm E + L paper path control device Tensiomatic paper path tension measuring device central AIC remote control automatic register special surface treatment of inking rollers for UV inks temperature control in ducts and oscillating rollers UV drying with air cooling and 10 UV lamps UV vapor extraction device maximum speed 300 m / min. die cut of registration system cold pressing of metallic foil laminating aggregate flexo printing unit format from 22" to 30" with 1/6" Corona cutting unit for self-adhesive labels printing form bender Grafotronic 440 maximum reel diameter 800 mm viewing table Master with cutting and editing capabilities shaft with five pairs of cutting discs three knife cutting blade module Giedsxvz H Uopfx Afajn

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Godoxc Uv Ajpfx Afaoin

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,076 h, load capacity: 3,500 kg, lifting height: 4,590 mm, free lift: 1,140 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,175 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Gijdpfewwdl Ssx Afaen Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, 3rd valve, rear work lights, front work lights, heater, STVZO approval, full cabin, beacon.