3D Printer

Markforged X7

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Bodpfovvldujx Af Sect Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,823 h, 1. Basic information about the machine • Model: EOS M400 • Manufacturer: EOS GmbH • Year of manufacture: 2015 • Laser operating hours: 8823h • Total exposure time: 612h • Condition: little used, training machine, last maintenance July 2024 2. Technical specifications • Installation space size: e.g. B. 400 x 400 x 400 mm • Laser: type & power (1,000 W fiber laser) • Material compatibility: aluminum - license available • Layer thickness: 90 µm 3. Accessories & equipment • Powder handling system: sieve module, suction station, lifting trolley • Filters & maintenance units: available Bedpjv Hqhgjfx Af Ssct • Additional construction platforms: 4 pieces • Cooling or additional equipment: air/water cooler, as good as new (01/201) • Material: 100kg AlSi10Mg included 4. Location & transport • Location: Villach, Austria • Availability: Immediately • Transport: Transport & dismantling are the responsibility of the buyer • Inspection: possible on site

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Bcjdpfxexu E Srj Af Sjt Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The STUDER S242 is a versatile hard-fine machining center for grinding, turning, and milling operations on medium-sized workpieces. It is ideal for complete machining in a single setup – from external and internal grinding to hard turning and drilling/milling with driven tools. With the Studer S242, workpieces in the rotational sector can be finished to very high precision. Thanks to integrated automation, this machine is suitable for both single-part and series production. The S242 is also equipped with a VDI turret featuring driven tools. Center distance: 800 mm Swing diameter: 180 mm Max. workpiece weight: 60 kg X-axis: travel 220 mm, resolution 0.00001 mm Z-axis: travel 1,600 mm, resolution 0.00001 mm Grinding spindle: 6.8 kW, grinding wheel Ø 400 x 50 mm, automatic balancing Workpiece spindle head: AC synchronous spindle motor 10.5 kW, up to 7,500 rpm Tailstock variants: quill tailstock with integrated position measuring system Machine bed: Mineral cast Granitan® S103 for excellent damping and thermal stability Software & Control: Fanuc 31i-A control with 15" touchscreen Dialog language: German for StuderWIN Integrated measuring control with Renishaw LP2 touch probe, switchable to the turret Special features & advantages: Complete machining in a single setup → reduced main and secondary times High dimensional accuracy and surface quality due to Granitan® machine bed Short changeover times, suitable for everything from single-part to large-series production Flexible clamping system and modular tool configuration High process reliability thanks to integrated measuring and sensor systems Dimensions & Weight: Total weight: 12,000 kg Connected load: 45 kVA Bjdpfxjw Hqm Is Af Soct Compressed air requirement: min. 5.5 bar

Year of construction: 2017, operating hours: 60,500 h, condition: good (used), functionality: fully functional, machine/vehicle number: S0721Q0018, + The machine is currently integrated into our production and successfully manufacturing components of very high quality (currently used material: Inconel alloy). + The unit is offered without any additional peripheral equipment. + There is a service contract for the unit between toolcraft and TRUMPF. The last maintenance and inspection by the manufacturer was carried out in April 2025. + Together with the unit, you will receive the operating manual as well as the service report from the most recent maintenance in digital form. + An inspection of the machine offered for sale is possible at any time by prior arrangement. If you are interested or have any questions, please do not hesitate to contact us by phone or email. Bcjdpfsw Ebt Ajx Af Sot

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 65,000 h, machine/vehicle number: S0721Q0007, + The machine is currently integrated into our production and is successfully manufacturing components of very high quality (current material in use: Inconel alloy). Bcedew Ebpkjpfx Af Set + The system is offered without additional peripheral equipment. + There is a maintenance contract for the system between toolcraft and TRUMPF. The most recent maintenance and inspection by the manufacturer was carried out in April 2025. + You will receive the operation manual and the most recent service report in digital form along with the system. + An inspection of the machine offered for sale is possible at any time by appointment. If you are interested or have any questions, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Bsdovcyk Nepfx Af Sect

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Bcodpfxjv U Nnuj Af Set Hourly output 250-400 kg depending on the product

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: L0503, Year of construction: 2015, operating hours: 38,589 h, The Fortus 900mc 3D Printer is one of the most precise and powerful FDM printers on the market. With the largest build size among all Fortus® systems, this 3D printer is designed to meet the most demanding manufacturing requirements. The build volume of the Fortus 900mc by Stratasys measures 914.4 x 609.6 x 914.4 mm, covering a wide range of 3D printing applications. The selectable layer thicknesses of 0.178mm, 0.254mm, 0.330mm, and 0.508mm allow for precise adjustments to suit your specific part requirements. For optimal operation of this Stratasys 3D printer, an additional washing station is needed. The Stratasys Fortus 900mc uses the soluble support material SR30 or a Break-Away support material, enabling the creation of intricate models, including undercuts and holes, while reducing the need for post-processing. The FDM 3D printer Fortus 900mc works seamlessly with the popular, free GrabCAD software, making it accessible even for inexperienced users to swiftly and easily fabricate their projects. Make the most of this Stratasys FDM 3D printer model with iSQUARED materials such as ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, and ULTEM 1010. The cartridges for building and support materials each hold either 1510 cm³ or 3020 cm³, ensuring uninterrupted printing. This printer can be installed anywhere without the need for specific setup conditions. No special ventilation is required, as the Fortus systems do not produce harmful vapors, chemicals, or waste. Bsdpfx Aovmpk Hsf Sjct Download the provided site preparation guide to understand the space and connection requirements of the Stratasys Fortus 900mc. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. If you opt for installation and training by one of our certified service technicians, you will also receive a 6-month warranty on your 3D printer. Additionally, we can provide you with all the accessories and consumables, tailored to your purchased 3D printer, from a single source. This means that you take no risks with your purchase.