Used Trime Light Tower Hybrid for sale (23,302)

Condition: used, mileage: 1,558,580 km, power: 385 kW (523.45 HP), first registration: 04/2000, fuel type: diesel, number of seats: 72, gearing type: automatic, emission class: euro2, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, +++Engine and transmission v. 200,000-300,000km new+++ +++very clean condition+++ Engine: Mercedes-Benz Emission class: Euro 2 Gearbox: AutomaticSeats: 70+1+1 sleeping seats with lap belts _____ Safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Sausage cooker * Central toilet * Leather head inserts * Driver microphone Febu Ticowg Np Ij Aegb * Tour guide microphone Exterior * Trailer hitch prepared * Raising/lowering system * Power steering * Tachograph with window * Sun visor * Electric exterior mirrors * Driver door * Ski case eyelets * Central locking * Roof hatches Audio & communication * Radio / cassette * Video Other * Hubcaps * Twin tires * Tires: front: 50%, rear: 50%, rear: 40% * Vehicle dimensions: 2.55 m wide, 4.00 m high * Our internal vehicle number: 11383 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: used, mileage: 140,000 km, Year of construction: 2020, Field of application: Freight transport Serial number: WMA30XZZ1LP14xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20122 Specifications: EU approved until 17.02.2026 Model year: 2020 Mileage: approx. 140,000 km Automatic transmission Full air Hydraulics Euro 6 engine Length: 726 cm Width: 255 cm Wheelbase: 330 cm Net weight: 10,200 kg Drivetrain: 6x4 Horsepower: 641 hp Cowcatcher Extra lights Compressor horn Bed Refrigerator Radio/CD Air conditioning (AC) Description: MAN Tgx 33.640 tractor from 2020, recently EU approved and ready for operation. The vehicle has new tires on the 3rd axle and is equipped with full air suspension , hydraulics , bed , refrigerator and air conditioning for optimal comfort. This tractor has a powerful Euro 6 engine with 641 hp , and it is ready for delivery at short notice. Km: 140000 HK: 640 Technical approved: Yes EU-approved until: 17.02.2026 Own weight: 10200 Total Weight: 33000 Payload: 22800 Width: 255 Length: 726 Fgsbowdvdgju Tic Ajb Euro: 6 Gearbox: Automatic

Condition: like new (used), Item: D-7033-Elevator Elevator with plastic conveyor, Stainless Steel support structure, Dimension: Length: 2000 mm, Approach H.: 250 mm Discharge H.: 1050 mm, Width: 250 mm Fjbueitk D Aj Tic Aogb Flight H.: 30 mm Distance: 250 mm

Condition: used, 0 0,4 - 2,0 mm Workingpiece thickness from to 10 - 40 mm Total length 3100 mm Feed speed 7 m/min. Bi-Matic edge banding machine Type Prima 6.2 r.a. - Partnership Edition ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 2mm min. Panel width (without rounding unit): 70 mm min. Panel width (with rounding unit): 120 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 40 mm Feed speed: 7 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing cutterhead. Cross-cut saw unit 1 motor, 2 saw blades Radius trimming unit, with Easy Set adjustment system Rounding unit (copy trimming unit) with 2-position turret. The complete Fgsbu Tiewgwl Rec Asb unit can be inserted and removed pneumatically. Including suction device with chip collection box for scraper chips. Radius scraper unit can be inserted and removed, incl. - Suction device with chip collection box for scraper chips - with Easy Set adjustment system - 2 numerical displays Flat scraper unit with 4-fold usable scraper knives. The unit can be inserted and removed. General equipment: - Control panel with 7'' touchscreen - High-gloss package: Roller scanning for radius trimming unit, radius scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue tray - Interior lighting - Teflon-coated glue pot with energy-saving mode in standby mode - Glue roller with screw conveyor for long and high workpieces - Pressure zone with motorised 1st steel pressure roller + 1 rubber roller - Roller snipping shears for edges 44 x 2 mm ----- Price of the above machine on request! ----- Options with surcharge: Glue tray with quick-change system and 2nd quick-change glue tray, EUR 2,990.00 Additional quick-change glue pot for, EUR 2,590.00 Freight costs, complete, incl. delivery and installation. Including intensive training of operating personnel, EUR 3,750.00 ----- No original picture, picture shows identical model! (technical data according to manufacturer - without guarantee!) All prices quoted are net plus VAT.

Condition: used, Year of construction: 1992, pressure 100 t chamfer lenght 3100 mm column daylight 2540 mm stroke 300 mm table height over floor 750 mm control DNC 90 total power requirement 8,6 kW weight of the machine ca. 8500 t Overall size ca. 3540x1240x2555 mm Machines type 391 Machine no.: 67 39130049 -4 controlled axes -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools Fsbuowf Dyxs Tic Ajgb -Tool cabinet extra large stroke 300mm -various tools Machine does not have a valid UVV

Year of construction: 2024, Condition: new, Our KVK 3 is a semi-automatic stretch wrapper with turntable which, compared to the KVK 2 (MA), is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal tension, so that even light packages are not pulled off the turntable. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 3 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with diameters of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 3. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets per day. Fgjbu Tiewf Iapec Aeb For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, mileage: 350,000 km, Year of construction: 2015, Serial number: YS2R6X4000210xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20147 Specifications: EU approved until: 05.08.2025 Model year: 2015 Mileage: Approx. 350,000 km Drivetrain: Automatic Tires: See pictures Retarder: Yes Engine: Euro 6 Length: 750cm Width: 255 cm Wheelbase: 330/135 cm Curb weight: 14,590 kg Axle configuration: 6x4 Horsepower: 730 hp Extra lights Plow plate Fobu Tjwdu Hyeic Aogb Rear view camera Trailer hitch Damage: Some minor damage, shown in pictures Tool cabinet: Bed Refrigerator Radio/CD Climate/AC Description: Scania R730 tandem tipper truck from 2015, EU-approved until 05.08.2025. The truck has 350,000 km, automatic transmission, 730 hp, and is equipped with a plow plate, reversing camera, towbar, tool cabinet, bed, refrigerator, radio/CD and climate/AC. Ready for operation and can be delivered quickly. Some minor damage is shown in the pictures. Km: 350000 HK: 730 Technical approved: Yes EU-approved until: 05.08.2025 Own weight: 14590 Total Weight: 30000 Payload: 15335 Width: 255 Length: 750 Euro: 6 Gearbox: Automatic

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable Febu Tewgwl Deic Asgb - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 Fgebera Rrhju Tic Ajb closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 weight ca. 3600 kg a lot of lower and upper tools incl. work light

Year of construction: 2024, Condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. Febu Tiewf Iaisc Ajgb With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2019, Serial number: SUDNJ3000006xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20180 Specifications: EU approved until 20.11.2025 2019 model Tires (see pictures) Febowdu Epju Tic Asgb Air suspension 6 meter extension Hydraulic bridges Length: 1,341 cm Width: 255 cm Wheelbase: 131/131 cm Net weight: 11,500 kg Description:Wielton machine trailer, model year 2019.The trailer has recently been equipped with a new ABS system and various lights have been replaced. It is EU approved and ready for immediate operation.Delivery can be done quickly. Technical approved: Yes EU-approved until: 20.11.2025 Own weight: 11500 Total Weight: 48000 Payload: 36500 Width: 255 Length: 1341

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Feed motor 7 kW Feed speed 5-40 m/min. weight of the machine ca. 3100 kg Weinig Powermat 700 still in use, for inspection including suction unit, pipes and motor for the suction unit ----- Brief summary Manufacturer's description: Working width: 20-230 mm Working height: 10-160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 10 - 160 mm (with tool flight circle 93 - 125 mm) 1. spindle ----- First lower horizontal spindle Motor 11 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment travel 17 mm Folding device, including rebate cutter MarathonCoating for table insert in front of 1st lower spindle Electronic digital display for radial adjustment 2. spindle ----- First right vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Stop lip after the right-hand spindle with quick adjustment Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic. 3. spindle ----- First left vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Easily removable suction hose Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 4. spindle ----- First upper horizontal spindle Motor 11 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm Split pressure shoe in front of upper spindle with horizontal adjustment plane, Fgebu Ticowgwlwe Asb Adjustable to tool flight circle and swivelling away from the tool, pneumatic Pressure shoe before and after the upper spindle with electronic digital displays digital displays, integrated in the memory function or the PowerCom Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 5. spindle ----- Second upper horizontal spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm ...

Year of construction: 2024, Condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Fgjbu Ticswf Iace Ajb If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, Year of construction: 2017, operating hours: 4,700 h, Field of application: Construction Serial number: LL16-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20123 Specifications: Certified until 08.2025 Model year: 2017 Hours: approx. 4700 Power: 138 kW Weight: 27,200 kg Chassis: See pictures Belt width: approx. 60 cm Width of the machine: approx. 230 cm Excavator bucket Sanding bucket Sun bucket Gjerstad S70 attachment R8 Rototilt from 2018 Rear and side camera Extra light Diesel heater Radio/CD Air conditioning (AC) Description: Kobelco SK260LC excavator from 2017 with approx. 4700 hours. The machine comes with 3 buckets, R8 Rototilt from 2018 and Gjerstad S70 attachment . It is certified until 08.2025 and ready to be put into operation. Equipped with rear and side camera , extra lights , diesel heater , and air conditioning Can be delivered quickly. Hours: 4700 Total Weight: 27200 Width: 230 Fgjbu Ticswdu D Se Aob Kw: 138

Year of construction: 2024, Condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. Fgebswf H Ulju Tic Aeb With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, Condition: new, Our KVK 4 is a semi-automatic stretch wrapper which, in addition to the KVK 3, offers up to 6 freely storable programs for absolutely consistent results and thus the safe exclusion of the "human factor". Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods are not pulled off the turntable. As part of the programs, you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 4 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. Automatic detection of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Fgjbuswf H Tno Tic Ajb If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for the detection of dark packaging materials or black film, 4 turntables in different sizes of up to 2200 mm diameter and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK. This model is our recommendation if you value absolutely consistent results and want to optimize your film costs at the same time. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2024, Condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. Fsbuowf H Tbe Tic Aogb The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, Condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Febjwf H Sweu Tic Asgb Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2024, Condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Fobujwf H Sko Tic Ajgb Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2024, Condition: as good as new (ex-display), Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. Fgobu Ticowf H Ras Ajb For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, Condition: as good as new (ex-display), Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement! Fgebswf H Edju Tic Ajb

Year of construction: 2022, Condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Fgjbujwf H Dao Tic Ajb In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, Condition: as good as new (ex-display), Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement! Fjbu Tswf Hwgjic Asgb

Year of construction: 2024, Condition: new, machine/vehicle number: KVK 3 Automatik_Vorführer_1, Our KVK 3 Automatic is a demonstration unit from 2022. This automatic stretch wrapper with turntable, which, compared to the KVK 3, automatically applies the film to the pallet and also cuts it off again after the wrapping cycle. Wrapping can also be started conveniently by remote control. No more getting off the stacker, no more bending down to attach the film to the pallet. It is also equipped with a pre-stretch system for 250 % stretching. Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll, thereby reducing your material consumption enormously. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods are not pulled off the turntable. Fgobuswf Hu Eo Tic Asb With a weight of 700 kg, this model is very stable and designed for loads of up to 2000 kg. The KVK 3 Automatic has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Options: In addition to a suitable drive-on ramp and a photocell for detecting dark packaged goods or black film, the wrapping height of the KVK 3 Automatic (up to 3200 mm) can also be varied as an option. This model is our clear recommendation if you wrap very light packaged goods or stretch wrap more than approx. 30 pallets a day and the film needs to be applied or cut automatically. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2024, Condition: as good as new (ex-display), machine/vehicle number: KVK 3 Automatik_Vorführer_1, Our KVK 3 Automatic is a demonstration unit from 2022. This automatic stretch wrapper with turntable, which, compared to the KVK 3, automatically applies the film to the pallet and also cuts it off again after the wrapping cycle. Wrapping can also be started conveniently by remote control. No more getting off the stacker, no more bending down to attach the film to the pallet. It is also equipped with a pre-stretch system for 250 % stretching. Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll, thereby reducing your material consumption enormously. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods are not pulled off the turntable. Fgobu Ticjwf Htbj Asb With a weight of 700 kg, this model is very stable and designed for loads of up to 2000 kg. The KVK 3 Automatic has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Options: In addition to a suitable drive-on ramp and a photocell for detecting dark packaged goods or black film, the wrapping height of the KVK 3 Automatic (up to 3200 mm) can also be varied as an option. This model is our clear recommendation if you wrap very light packaged goods or stretch wrap more than approx. 30 pallets a day and the film needs to be applied or cut automatically. For further information, we have attached the technical data sheet as a PDF to this advertisement!