Used Schaffer 3033 S for sale (10,151)

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Doln Tov Uw Uvjlkvjcg Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length: 3-150mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg Dimensions L x W x H: 1900 x 1500 x 2400 mm colour: grey

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm Dcoln Tshzr U Ielkveg

Condition: used, Year of construction: 1989, Motor output 3 kW Saw blade diameter 320 mm Dcjlswf Rglon Tlkvsg machine weight ab. 500 kg

Condition: new, power capacity 0,75 kW degree 45° Grad turning speeds 10.000 U/min milling height 4,0 mm motor 400 Volt range L-W-H 560 x 300 x 450 mm weight 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool Dcsln Teixmlmjlkveg

Condition: reconditioned (used), operating hours: 1,320 h, Functionality: fully functional, working width: 130 mm, area performance: 8,000 m²/h, overall weight: 1,430 kg, tank capacity: 265 l, total width: 145 mm, total length: 1,870 mm, water tank capacity: 265 l, operating speed: 9 mm/s, battery voltage: 36 V, sweeping width: 130 mm, Offered is a repaired Nilfisk BR 1300 S ecoflex ride-on scrubber dryer with 1320 operating hours recorded. The machine comes from the first owner and has always been serviced by Nilfisk. The customer opted for our autonomous cleaning robots TN70W and our compact sweeping robot DR SW90. We exchanged the Nilfisk, which is currently being overhauled and professionally repaired in our workshop. This BR 1300S has a scrubbing width of 130 cm and a suction width of 145 cm, the tanks each have 265 liters. The built-in ecoflex dosing system ensures a set dosage with the respective cleaning agent. The 36 V PzS480 trough battery was replaced with new battery cells in 7/2024. We have more than 25 years of experience with heavy cleaning machines worldwide and used machines are converted for long-term use. Machine is cleaned, scrub deck dismantled, motors checked, deck is sandblasted, powder coating base color and baked enamel (we do everything ourselves in our workshop), new brushes, panels are blasted, primed, powder coated, new suction lips, new scraper rubbers. Warning light and safety lighting is installed. Currently, various ride-on scrubber dryers Hako Scrubmaster B 310 R / Power Boss Admiral in various versions are being rebuilt in our workshop and equipped with new LITHIUM TECHNOLOGY. Visit us at our company in Belgium or contact us by email or phone Shipping worldwide. In Germany, our company is in Geilenkirchen. Our base in Mannheim is also our German workshop, exhibition for our cleaning robots. Not every customer or every building can work with cobot robots, but they want to have a well-maintained building and clean it cheaply. For us, used is sustainability, well thought-out solutions and affordable machines that will do their job for many years to come. Clients in the United States will be assisted by our USA Representative in Wichita, KS with Logistical Hub in Savannah, Georgia. Dcjln Tovu Sl Ajlkvjg

Condition: excellent (used), mileage: 301,548 km, power: 338 kW (459.55 HP), first registration: 03/2019, fuel type: diesel, fuel: diesel, wheelbase: 4,500 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, = Additional Options and Accessories = - Power Take-Off (PTO) = Remarks = WMA89SZZ1KM823475 = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,419 cc AdBlue System: Yes Weights Unladen Weight: 11,441 kg Payload: 16,559 kg GVW: 28,000 kg Functional Pump: Yes Dceln Tswh Afrslkvjg Condition Technical Condition: Very Good Visual Condition: Very Good Additional Information Contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Year of construction: 2017, Condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Delnjv Uw U No Tlkvocg Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-310 mm Workpiece diameter with loading magazine: from 3 - 20 mm

Condition: new, Sharpening machine for S 300 Ital Form Made with materials suitable for the food industry Easy to use compact machine Practically does not need maintenance Easy cleaning Allows you to sharpen knives Sharpening rollers dimension: Ø60mm Dimensions: 180 x 350 x 300mm Weight: 13 kg Dcjln Towhxm Eolkvog

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Durma hydraulic press brake type AD-S 2060 Dcelowdxb Ujn Tlkveg Built in 2007 Working length 2050 mm Press force 60 tons Cybelec control Modeva 10S CNC controlled Y1 Y2 X R Z1 Z2 With tools

Condition: new, bore capacity in steel (diameter) 28,0 mm threading 12 M bore stroke 130 mm throat 250 mm table: 375 x 375 mm morse taper 3 MK turning speeds 75 - 3.200 U/min total power requirement 1,1 / 1,5 kW weight of the machine ca. 215 kg. range L-W-H 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Dcsln Tlked Ikywoveg Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Condition: used, Year of construction: 2007, Laminating machine Foliant Gemini 400 S Dcolnevt T Ipe Tlkvjg Technical data: Working width: 380 mm Sheets (B3) per hour: 1200 / 1800 (400 GA) Format max. 38 x 58 cm Format min. 32 x 25 cm Machine dimensions: 700 x 1170 x 800 mm

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K Doln Tlkewd Txusvecg - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Year of construction: 1993, Description: Suitable for manual grinding of various types of cutting, milling, and drilling tools. Accessories: Universal dividing head SK 40 Motorized height adjustment of the grinding head Infinitely variable grinding spindle drive Halogen lamp 2 grinding wheel guards Center setting gauge 1 dividing wheel Deln Tlswakq Tjkvjcg Workpiece diameter between the centers: 238 mm Grinding stroke max.: 190 mm Cross adjustment tool slide: 100 mm Cross adjustment of tool slide: 100 mm Vertical adjustment of grinding head: 325 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm Swiveling tool carrier: 360° Grinding wheel diameter: max. 200 x 20 mm Grinding spindle speeds continuously adjustable from: 2,000 - 10,000 rpm, Connected load: 2.0 kW (400 V / 50 Hz) Dimensions L x W x H: 1100 x 800 x 1760 mm, Weight approx.: 554 kg colour: green RAL 6011 Longitudinal adjustment of the grinding spindle: 5 mm Swiveling grinding head carrier: 360°

Condition: new, Chicken breast slicing machine S 300 Ital Form Table-top compact breast slicer machine. It produces up to 200 kg per hour. Load and pick up of the breasts on the same side of the machine Dcjln Tlkewhxlzoveg Made in stainless steel Produces up to 200 kg per hour Front load and pick-up Cuts 4 slices per breast Active security Systems Voltage: 230V, 50/60 Hz, 1 N/PE Electric power: 8W Dimensions: 530 x 430 x 340mm Weight: 60kg Optional accessories: Table with stainless steel wheels 510 € Additional blades set ( 1 unit ) 400 € Additional blades set ( 2 units ) 435 € Additional blades set ( 3 units ) 470 € Additional blades set ( 4 units ) 530 € Additional single blade for TF 310 € Additional support blades set 430 €

Condition: used, mileage: 108,966 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,930 mm, first registration: 10/2020, fuel tank capacity: 80 l, emission class: euro6, color: white, number of seats: 2, number of previous owners: 3, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Front and rear parking sensors - Right side sliding door - Android Auto - Apple CarPlay - Automatic dipped beam - Body-colored exterior mirrors - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Front electric windows - Power-folding exterior mirrors - Power-adjustable exterior mirrors - Electronic brake force distribution - Euro 6 - Driver's airbag - Remote central locking - Hill-hold control - Height-adjustable driver's seat - Height-adjustable steering wheel - LED daytime running lights - Leather-trimmed steering wheel - Lumbar supports - Multifunctional steering wheel - Multimedia capability - Fog lights - Emergency brake assist - Radio - Rain sensor - Left side sliding door - Sidebars - Heated seats - Start/Stop system - Ignition interrupter - Body-colored bumpers - Heated windshield = Additional Information = General Information Number of doors: 5 Model range: May 2019 - July 2023 Cabin: single Dcsljwhwawon Tlkvjg Technical information Torque: 385 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Transmission: 6-speed, manual Dimensions Length/Height: L1H1 Dimensions (L x W x H): 512 x 203 x 200 cm Weights Curb weight: 1,862 kg Payload: 1,538 kg GVW: 3,400 kg Interior Interior: black Environment CO₂ emissions: 199 g/km Consumption Average fuel consumption: 6.2 l/100km Urban fuel consumption: 7.2 l/100km Extra-urban fuel consumption: 5.6 l/100km Maintenance History and Condition General Technical Inspection (AIT): Inspected until October 2025 Number of keys: 2 (2 remote controls)

Condition: good (used), Year of construction: 1997, Pressure 85 t Dcolnevbbugo Tlkvjg folding length 2550 mm Stroke 365 mm Machine weight approx. 9,800 kg

Condition: used, mileage: 4,490 km, fuel type: diesel, axle configuration: 4x4, fuel: diesel, Year of construction: 1998, Equipment: all wheel drive, Make of engine: Mercedes Production country: DE Dcoln Tlewhvbgjkveg Please contact Theo Lelie for more information

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model Matrix NeXUS 2 Brand MAZATROL Main Drive Spindle speed range 12000 Number of axis 6 Movement X-Axis Movement 450 mm Y-Axis Movement 200 mm Z-Axis Movement 1119 mm W-Axis Movement 1436 mm B-Axis Movement -30° to 220° Tools Slots in storage 20 Max weight 5 kg Max tool diameter 125 mm Max tool length 210mm Additional Equipment Tool magazine for 36 Capto tools (no tool holders included) Preparation for bar feed Automatic parts catcher (D:65 X L: 120 X2.5Kg) incl. ejector High pressure cooling 15 bar incl. simultaneous flood cooling 5 bar Preparation for chip conveyor Dcsln Tljwfiltskveg Ejection side Preparation for Mazak Monitoring System B OMP60 (optical) This MAZAK INTEGREX J-200 S Lathe was manufactured in the year 2016 in Japan. It is equipped with a Mazatrol Matrix Nexus 2 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm. See original purchase confirmation for more technical details as PDF (German) attached. Application Types Turning

Condition: used, Year of construction: 2008, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Dcoln Tlkeun Rlweveg Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length: 3-150mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg Dimensions L x W x H: 1900 x 1500 x 2400 mm colour: grey

Condition: new, Cooking kneading kettle S 300L Dsln Tlswhw Hwskvecg Ital Form Volume: 300 liters Stainless steel Dimensions: 160x130x125cm

Condition: reconditioned (used), type of input current: three-phase, input voltage: 400 V, welding current (max.): 385 A, Step-controlled MIG/MAG industrial machine Separate 4-roll wire feeder case Integrated control for secondary parameters such as wire feed Plug-in intermediate hose package Soft arc for extremely low-spatter welding of solid and flux-cored wires, for low- to high-alloy materials Oscillating piston pump for optimal cooling Euro-ZE for common torches Technical specifications: Line voltage: 400 V Current range: 40 to 385 A Min. open-circuit voltage: 17.4 - 19.2 V Max. open-circuit voltage: 41.6 - 45.4 V Application class: S Protection class: IP 21 Wire feed rate: 1.7 - 18 m/min Voltage steps: 24 Choke taps: 2 Duty cycle: 335 A at 35% 300 Amps at 60% 240 Amps at 100% Dcelewhwx Tsn Tlkvog Weight: approx. 163 kg Scope of delivery: 5 m power cable + 16 A plug, gas hose, short ignition lead, operating instructions

Condition: used, Year of construction: 2008, Functionality: fully functional, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, outer dimension length: 4,500 mm, outer dimension width: 7,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Dcoln Tlevtdztjkvog

Year of construction: 2009, Condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Dcelnjuxc Dhj Tlkvsg Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Dcsln Tewd Ha Selkvsg Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length with loading magazine: 3-310mm Workpiece length without loading magazines: 1-450mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg weight: approx. 1,700 kg Dimensions L x W x H: 1900 x 1200 x 2400 mm colour: Gray

Year of construction: 2009, Condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Djln Touxczajlkvjcg Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm