Used Schaffer 2030 for sale (251)

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02030, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfoi Ebifsx Ahwjtc

Condition: new, Siemens 6FC5203-0AD27-0AA0-S32 control panel , unused, in opened original box, 100% functional, scope of supply according to photos Ijdpfx Aei Edzqohwjtc

Condition: new, Siemens 6FC5203-0AF04-0AA0 operator panel front OP 010S 10.4" E-Stand: L SN:LBNO385283, unused, 100% functional, scope of delivery as per photos Itsdpfx Ahji Edz Aswoc

Condition: ready for operation (used), Indramat TDM 1.2-030-300-W0 AC. Servo Controller, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ijdpfx Asi Ebmujhwotc

Condition: ready for operation (used), Indramat TDM 1.2-030-W1 A.C. Servo Controller SN 236232-783066-093 professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately Itjdji Ebm Ajpfx Ahwoc

Condition: new, Indramat DDS 3.1-W030-D controller, SN:255497-02030, the controller has been factory refurbished by the manufacturer, used, with normal signs of wear, 100% functional, delivery scope as per photos. Itedpfx Ahox Dw Epjwoc

Condition: ready for operation (used), Siemens 6FC5211-0AA00 -0AA0 electrical module for CNC NCU terminal block for 8 DMP compact modules Version: A SN:T-K22030154, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the photos Itedpox Dxazofx Ahwec

Condition: ready for operation (used), Siemens 6FC5203-0AF52-0AA0 Operator Panel Front SN T-U32018414, 12.1" TFT, width: 19", used, in good condition, 100% fully functional, scope of delivery as per photos. Iedjx Dxpiopfx Ahwjtc

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1 SN:ST-LN2004535 , professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please ask separately! Itodpfx Aji Edywjhwec

Condition: ready for operation (used), Siemens 6FC5203-0AF22-1AA2 machine control panel MCP 483 MPI/PROFIBUS-DP, width 19", membrane keys, 22mm emergency stop with 3 keys, version: E SN:T-A62062669, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itedpfx Ahsx Dxauowec

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Itodpfx Ahog Ngixjwoc Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. Iedeiz A Rqjpfx Ahwjtc The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Year of construction: 1999, operating hours: 5,635 h, machine/vehicle number: 991900, fuel type: diesel, Empty weight: 39.800 kg Iodpfx Asxwi Ayohwstc Lifting capacity: 1.400 kg Working height: 3.400 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 8.4x3x4.65 Please contact PFEIFER GROUP for more information

Condition: used, maximum load weight: 880 kg, overall weight: 1,300 kg, axle configuration: 2 axles, first registration: 04/2007, next inspection (TÜV): 09/2026, * Advertising trailer with tarpaulin body * Gross vehicle weight reduced from 2,600 kg to 1,300 kg * 1 previous owner Since 1972, your reliable partner for all matters relating to automobiles and commercial vehicles in 28832 Achim, at Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers around 200 vehicles, including vans, commercial vehicles and construction machinery! Itjdpfxow Ua Ene Ahwoc We continuously provide attractive financing options at favorable special rates. If you are interested, we would be happy to prepare a customized offer for you! We are interested in part-exchanging your commercial vehicle/construction machinery. If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Please note: our offer generally does NOT include a new TÜV inspection. Delivery of your 'new' commercial vehicle is available through our external partners at an additional charge. The details provided in listings, on the Internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Stated features must be checked separately if necessary. Subject to error and prior sale.

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Iodox Dtuaepfx Ahwjtc Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m • Length approx. 6.0 m • Stable steel steps with anti-slip markings • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2002, total length: 115,200 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 7,930 mm, color: red, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tyre size: 385/65R22.5 Brakes: disc brakes Suspension: air suspension Ijdpewhcd Ijfx Ahwetc Rear axle 1: tyre tread left: 40%; tyre tread right: 40% Rear axle 2: tyre tread left: 50%; tyre tread right: 50% Rear axle 3: tyre tread left: 50%; tyre tread right: 50% Weights Curb weight: 5,540 kg Payload: 33,460 kg Gross vehicle weight: 39,000 kg Functionality Extendable body: Yes Condition Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING Iodpfx Ahev Rw Riowetc LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350

Condition: new, Metallkraft MSBM 2020-30 PRO Motorized folding machine 3779121 Description: - Powerful and quiet drive via LENZE geared motors with brake - Compact, heavy and stress-free welded steel construction - Sharp bending rail made of C50 tool steel on the clamping beam - Continuous, replaceable bed support made of C50 tool steel - Continuous bending rail made of C50 tool steel on the bending beam - Automatic pressure regulation of the clamping beam via motor current pick-up - Clamping beam drive via generously dimensioned trapezoidal threaded spindles - PT 1 bending angle adjustment via potentiometer on the front of the machine (right) - Manually fine-adjustable bending beam with scale - Manual crowning via pressure screws in the folding beam - Foot remote control with emergency stop function - All moving parts mounted on low-maintenance bearings - Electrical components from Schneider or Omron - SH models with high, segmented goat foot tools - Quality Made in Europe Available on request: DUO models with continuous sharpening rail and segmented fence foot tools, standard hardened tools, hardened sharpening rail and bending bar, hardened segmented tools and bending bar, hardened segmented fence foot tools and bending bar Max. working width: 2020 mm Max. clearance between upper and lower beam: 200 mm Dimensions and weights: Length (product) approx.: 2935 mm Width/depth (product) approx.: 1100 mm Height (product) approx.: 1560 mm Weight (net) approx.: 3050 kg Bending capacity: Bending capacity 400 N/mm²: 3.0 mm Bending capacity 700 N/mm²: 2.2 mm Ijdpfotw D Eqox Ahwjtc Explanation Bending capacity 700 N/mm²: Optional hardening of the tools is required for bending stainless steel Bending capacity aluminum: 3.6 mm Electrical data: Output power cheek: 0.75 kW Bending output: 3.0 kW

Condition: like new (used), SINUMERIK machine control panel MCP 483 MPI/PROFIBUS-DP, width 19" Itjdpornkh Sjfx Ahwjc Membrane keys 22mm EMERGENCY STOP is not included in the scope of delivery Was stored as a spare part

Condition: used, first registration: 07/1984, empty load weight: 5,940 kg, axle configuration: 3 axles, color: other, driver cabin: other, gearing type: other, emission class: none, suspension: steel, 3-axle stainless steel tank trailer - Manufacturer: Haas Heinrich - First registration: 26.07.1984 - Number of axles: 3 - Suspension: leaf spring - Axle type: BPW - Brakes: drum - Length: 9900 mm - Width: 2500 mm - Height: 3400 mm - Unladen weight: 5940 kg - Tank material: stainless steel - Total tank volume: 17,570 L - Tank compartments: 5 - Insulated Itedextuqbjpfx Ahwjc

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Itedpfx Aowmdw Hjhwjc Price excluding VAT

Year of construction: 1993, condition: good (used), Central vacuum system for dust , fumes and solids in industrial facilities. VAC unit is a suitable choice of high vacuum system for extraction of welding fumes, dust from grinding, polishing processes. Itedpfx Ahen Nvw Aswjc Capacity of 3000 m3/h at a vacuum of 19000 Pa Maximum vacuum - 22000 Pa Inlet diameter - 200 mm Motor power - 37 Kw FlexFilter F 12 B TFE filter units x 2 pieces included. Max airflow: 1,600 m3/h (900 CFM). Max. vacuum: - 50 kPa (7.25 psi). Separation: ≈99.95% (fine dust).

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted. Itodpfov H D Tvjx Ahwec

Year of construction: 1994, condition: used, Material width: 20-80 mm Material thickness: 0,3-1,5 mm Speed: 0-40 meter/min. working direction left-right Rolls: 20 pcs., diameter 30 mm Decoiler capacity: 300 kg Iodpfx Aedc Ez Hohwotc pneumatic break

Condition: used, mileage: 1,001 km, power: 15 kW (20.39 HP), gearing type: other, fuel type: diesel, color: grey, empty load weight: 1,600 kg, number of seats: 2, first registration: 07/1938, Year of construction: 1938, driver cabin: other, Equipment: trailer coupling, Vehicle location: Bovenden, Manufacturer/Brand: Kramer Model series: K-series Model: K 18 (K 18 M) Construction: Carrying frame Isdpfx Ahjvhlklswjtc Production period: 1936?1950 Number of units: 6768 Dimensions Dead weight: 1650 kg Length: 2820 mm Width: 1450 mm Height: 1440 mm Wheelbase: 1800 mm Ground clearance: 250 mm Track width: 1250 mm front: 1250 mm Rear: 1250 mm Turning radius without steering brake: 2500 mm Standard tires: front: 5.50 x 16 rear: 8.00 x 20 Engine Rated power: 11.7-14.6 kW, 16?20 hp Rated speed: 1500 rpm Number of cylinders: 1 Displacement: 1639 cm³ Fuel: Diesel Cooling system: Evaporative cooling Drive system Drive type: Rear-wheel drive Gearbox: 4/1 gearbox Maximum speed: 15 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .