Empty bottle inspector

Heuft

Condition: ready for operation (used), Year of construction: 2011, A Heuft rotary labelling machine is available. Throughput: approx. 36000bottles/h, labelling stations: 2, machine pitch: 120mm, carousel diameter: 1150mm, machine dimensions X/Y/Z: approx. 2500mm/2300mm/2500mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Itjdpfszmh T Aex Achji

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Itedpfsvcqnlsx Achji Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: - Detection of fallen, tilted, higher or lower bottles - DELTA reject system Itjdpfoy Ucy Nex Achji - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Itjdpfx Acjy Ucyvehoi Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: - Detection of fallen, tilted, higher or lower bottles - DELTA reject system - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2015, Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:             for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors Iedpfx Aorkgzkjcheti

Condition: used, Year of construction: 2015, Overview Iodsytp Ucspfx Achoti This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HBBISHXX Machine type: Empty bottle inspector (EBI) Technology: reflexx inspection technology Year of manufacture: 2015 Capacity: approx. 33,000 bottles per hour Inspection functions: - Detection of foreign particles - Detection of glass damage or defects - Detection of residual liquids in bottles Application: Quality inspection of empty glass bottles prior to filling Typical installation position: Upstream of filler in beverage bottling lines Condition: Used Availability: On request

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  - Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) - Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) - Container type: glass, transparent - Container diameter: 59-67.5 mm - Container height: 226-260 mm - Closure material: metallic, closure diameter: 28 mm Iedpfx Acjwz Evyehjti - Belt height: 1000 mm - Electrical connection: 400 V, 50 Hz - Max. Ambient temperature: 40 °C - Device diameter container carousel: 1150 mm - Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection - Special feature: Processing of NRW bottles with neck film Scope of Delivery  - HEUFT Tornado W incl. 2 cold glue stations - Spectrum TX control system - 6 format parts - Without domino laser, vacuum cleaner and glue pumps  

Condition: used, Cleaning-in-place system for closed cleaning of process systems. Constructed from a rectangular container divided into 2 chambers. For each chamber, the tank is equipped with a removable lid and an outlet pipe with manual valve. With dosing pumps for acid, alkali and disinfectant as well as a centrifugal pump as a CIP feed pump. Additional title: with 2 rectangular chambers Length: 3,7 m Width: 0,5 m Height: 1,5 m Weight: 300 kg Material: stainless steel Iedpfxexbptmj Achoti Features: rectangular vessel with 2 chambers, outlets with manual valves, prerun pump, dosage pumps

Condition: used, Year of construction: 2019, Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data - Capacity: up to 72,000 bph - Formats: 75 cl - Inspection features: Fill level and cap control Iedewfq Ntopfx Achjti Scope of Delivery  - Fill level inspection system | HEUFT | PRIME | 2019 - Reject system | HEUFT | DELTA-FW | 2019 - Bottle conveyor (10 meters)

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  - Capacity: Up to 60,000 bottles per hour - Formats: Supports 11 bottle formats - From 0,3l - 0,66l - Steini, NRW, Longneck Itodpfx Aowd Uk Sochei - Container types: Glass, not transparent, non-contoured - Container diameter: 60.4 – 69.1 mm - Container height: 174 – 270 mm - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - Label size range: - Width: 70 – 111 mm - Height: 33 – 100 mm - Band height: 1100 mm - Max. ambient temperature: 40°C - Power connection: 400 V - Machine design: Straight version, size L (approx. 3360 mm wide) - Bottle carousel diameter: 1610 mm - Number of bottle plates: 42 - Bottle rotation in carousel: Mechanical - Guide star diameter: 690 mm - Labelling stations: - 2 x Cold glue labelling stations - 8 glue pallets - 9 gripper positions - Automatic magazine feeding Scope of Delivery  - 1 x Labelling Machine | HEUFT | TORNADO | 2005 - Including: - 2 x Integrated Laser Coders | Bluhm - Complete labelling setup with format parts for 11 bottle formats - Cold glue stations, glue pallets, gripper arms, and automatic magazine - Technical documentation

Condition: used, Year of construction: 2015, Pentair BMF-Skid (with 18 modules) for beer filtration. Ideal for expanding existing systems or setting up a new filtration system. Additional title: Beer Membrane Filtration (BMF) Max. capacity: 100 hl/h filtrate, depending on beer quality Flow rate: 330 m3/h un-filtrate pump Itsdpfxjw Ea Ekj Achei Flow pressure: 1 bar un-filtrate pump Number of modules: 18 pcs. Length: approx. 5500 mm Width: approx. 1500 mm Operation / Control: ProfiBus connection to a central PLC Base construction: Module frame-mounted Features: 1 x BMF Skid, with 18 membrane modules; filtrate pump

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Iodpfjukafrjx Acheti Tech Specs: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - 2016 overhauled and modified Features: - Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We are offering the following used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please send us a message or call us. No. Cart Type Condition Width/Depth/Height 400 Peel board cart VTR 10.12,5.08 2 865 875 1980 401 Peel board cart VTR 10.12,5.08 2 865 875 1980 402 Peel board cart VTR 10.12,5.08 2 865 875 1980 403 Peel board cart VTR 10.12,5.08 2 865 875 1980 404 Peel board cart VTR 10.12,5.08 2 865 875 1980 405 Peel board cart VTR 10.12,5.08 2 865 875 1980 406 Peel board cart VTR 10.12,5.08 2 865 875 1980 407 Peel board cart VTR 10.12,5.08 2 865 875 1980 408 Peel board cart VTR 10.12,5.08 2 865 875 1980 409 Peel board cart VTR 10.12,5.08 2 865 875 1980 410 Peel board cart VTR 10.12,5.08 2 865 875 1980 411 Peel board cart VTR 10.12,5.08 2 865 875 1980 412 Peel board cart VTR 10.12,5.08 2 865 875 1980 413 Peel board cart VTR 10.12,5.08 2 865 875 1980 414 Peel board cart VTR 10.12,5.08 2 865 875 1980 415 Peel board cart VTR 10.12,5.08 2 865 875 1980 416 Peel board cart VTR 10.12,5.08 2 865 875 1980 417 Peel board cart VTR 10.12,5.08 2 865 875 1980 418 Peel board cart VTR 10.12,5.08 2 865 875 1980 419 Peel board cart VTR 10.12,5.08 2 865 875 1980 420 Peel board cart VTR 10.12,5.08 2 865 875 1980 421 Peel board cart VTR 10.12,5.08 2 865 875 1980 422 Peel board cart VTR 10.12,5.08 2 865 875 1980 423 Peel board cart VTR 10.12,5.08 2 865 875 1980 424 425 426 Baking cart VTR 10.12,5.10 2 1065 650 1930 427 Baking cart VTR 10.12,5.10 2 1065 650 1930 428 Baking cart VTR 10.12,5.10 2 1065 650 1930 429 Baking cart VTR 10.12,5.10 2 1065 650 1930 430 Baking cart VTR 10.12,5.10 2 1065 650 1930 431 Baking cart VTR 10.12,5.10 2 1065 650 1930 432 Baking cart VTR 10.12,5.10 2 1065 650 1930 433 Baking cart VTR 10.12,5.08 2 1065 650 1930 434 Baking cart VTR 10.12,5.08 2 1065 650 1930 435 Baking cart VTR 10.12,5.08 2 1065 650 1930 436 Baking cart VTR 10.12,5.08 2 1065 650 1930 437 Baking cart VTR 10.12,5.08 2 1065 650 1930 438 Baking cart VTR 10.12,5.08 2 1065 650 1930 439 Baking cart VTR 10.12,5.08 2 1065 650 1930 440 Baking cart VTR 10.12,5.08 2 1065 650 1930 441 Baking cart VTR 10.12,5.08 2 1065 650 1930 442 Baking cart VTR 10.12,5.08 2 1065 650 1930 443 Baking cart VTR 10.12,5.08 2 1065 650 1930 Itjdszf Hiajpfx Achji

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: A40 1438, DIMAC Packaging Star F30 USED DIMAC Star F30 packer & thermo tunnel used for bottle packaging (3x2, 3x3, 4x3) 2003 Year - Currently machine is stored in WH. Also for SALE LINKER CSW-30 & BTG-1M €19,000 PACKER SHRINK WRAPPER LINKER EUROPA SP z o.o. SERIAL SW-001/03/2007 YEAR 03/2007 CAPACITY 30 cases / minute +Thermo tunnel for transparent & printed shrink foil THERMOTUNNEL Itjdpfx Acetyu N Eohji MANUFACTURER TERMO-PAK MODEL BTG - 1M SERIAL 3755 YEAR 11/2016 CAPACITY up to 7200 bph

Condition: used, Year of construction: 2004, Manufacturer: HEUFT Model: VTR 10.19.0.10 Year of manufacture: 2004 Capacity: 3 trolleys, 60 × 100 cm Included: 6 bakery trolleys Condition: oven from current production, no repairs needed Functional, ready for further use Please contact us for additional information and photos. We also have other bakery machines and equipment available. Itodpfszcdk Dex Achoi