Used Tos Fgs 25 for sale (51,462)

Condition: good (used), Year of construction: 1990, Brandt dowel boring machine Type: DB 25 P 25 drilling spindles in 32 mm pitch Drill beam pneumatically swiveling Drill beam positions bottom/rear Locking at 45° / >45° possible with clamping shoe Deb E Soua Au Hswr Tjut Clamping height up to 120 mm possible Drilling height above table up to 50 mm Motor power 1.5 kW Drilling depths 0 - 95 mm Table height 905 mm Spindle speed 2800 rpm Drill shank diameter 10 mm 2 stops and 3 hold-down devices IMMEDIATELY AVAILABLE

Year of construction: 1978, Condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm Dsb Eolp U Aro Swr Tsut ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Condition: new, Functionality: fully functional, sheet thickness aluminum (max.): 25 mm, sheet thickness steel (max.): 20 mm, Fein KBH 25 metal core drilling system Duob E Swreu R Dkts Tst The world's first hand-held metal core drilling system, the FEIN KBH 25, combines the advantages of powerful hand drills and carbide-tipped core drills in one system. With significantly less effort, the new drilling technology enables high work progress, allowing you to work up to 5 times faster when core drilling. The FEIN KBH 25 also shows its strengths in tight, hard-to-reach places. A result of FEIN's many years of experience and enormous development lead as the inventor of the drill. Technical data: - Nominal power consumption 1,200 W - Power output 680 W - Load speed 0-520 rpm - max. drill Ø steel carbide core drill 14-25 mm - max. drill Ø aluminum carbide core drill 4-30 mm - max. drilling Ø steel HM hole saw 14-54 mm - max. corner dimension 27 mm - Weight 3.3 kg Scope of delivery: Metal core drill KBH 25, core drill Ø 18 mm incl. centering drill, additional handle, cutting spray, plastic tool case The core drill is new and unused. Only traces of storage may be present, as the machine was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: like new (used), power: 15.5 kW (21.07 HP), operation weight: 2,540 kg, Year of construction: 2023, operating hours: 79 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, hammer hydraulics, hydraulics, Operating weight: 2,540 kg, Yanmar Stage V - Tier 4 Final diesel engine, 15.5 kW/21.1 hp - 1105cc, water-cooled, Hydr. system open center, hydraulic variable displacement pump, dozer blade, tiltable cab ROPS/TOPS/FOPS with heating, fan, loudspeaker, radio preparation and rear view mirrors right and left, Joysticks with electro-hydraulic and proportional commands for, tilt, Main control circuit AUX1: single/double action, double driving speed with "AUTO TWO SPEED", Dipper arm: 1,350 mm, W/H: 2,725 mm / 2,527 mm, Excavation depth: 2,725 mm, Butterfly brackets on the stick, rotating beacon, Dsb E Swrotrmudj Tout AUX 2 hydr. pre-equipment with low throughput, control with potentiometer on left control lever (deactivates swivel) with Powertilt PT03, Swivel angle 180° (2x90°) Lehnhoff HS03 hydraulic quick coupler, Load hook on Powertilt in AR right without backhoe bucket and ditching bucket

Condition: used, Year of construction: 2001, Functionality: limited functionality, machine/vehicle number: V010712, pressing force: 80 t, overall weight: 5,750 kg, stroke distance: 200 mm, input voltage: 400 V, The machine was decommissioned at the beginning of 2024 and put into storage. It is an Amada HFE 80-25, with 80t pressure on 2.5m length. The Com connection of the PLC is defective and the machine occasionally "trembles" at the end of the bending process under higher loads, but continues to work precisely. Preferred sale in combination with Amada HFE 100-3 (see our other advertisements). When buying both machines together, the tool set is included. Delivery ex works. Dusb E Swrouxdvxe Tst We are always available for further inquiries. Viewings by prior arrangement.

Condition: ready for operation (used), Distillation machine, paint pigmenting, Used machine Manufacturer: Formeco Model: D 25 AX Dob E Swsu T H Eijr Tsut Overall dimensions: Length: 990 mm Width: 650 mm Height: 1230 mm Weight: 130 kg Electrical data: 230V; 9.4A; 2.05kW Tank diameter: 320 mm Tank depth: 520 mm Adjustable up to 200°C

Condition: excellent (used), Year of construction: 2000, Steinbock Boss electric pallet truck with loader Load capacity 2200 kg Further data can be found on the type plates Dusb E Swreua Aume Tst IMMEDIATELY AVAILABLE

Year of construction: 1973, Condition: used, pressure 25 t throat 220 mm stroke 8-80 mm dayligth 355 mm no. of strokes 140 Hub/min ram adjustment 50 mm ram surface 220x180 mm table surface area 160 mm hole in the table 90 mm Dujb Eslp U E Us Swr Tet total power requirement 7,5 kW weight of the machine ca. 2 t

Condition: new, Year of construction: 2025, The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The universally applicable MEBAbase 25 G mitre bandsaw is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data: Cutting range 90° - 255 - 265x200 or 200x200mm Duobet Rv Iio E Swr Tst 45° - 175 - 200x160mm 30° - 110 - 115x100mm Cutting speed 35 / 70m/min Drive - saw blade 2kW; 400V, 50Hz Saw blade tension electrically monitored Saw blade dimensions 2565 x 27 x 0.9mm Weight 265 KG Dimensions 1180 x 1500 x 1750mm Basic equipment of the MEBAbase 25 G - MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. - Fast mitre adjustment from 90° - 45°, infinitely variable according to scale to 0.5° accuracy - The mitre pivot point is the intersection point between the saw blade and the material system, which is why there is no change in the length dimension when the angle position changes - Manual quick material clamping. - Material stop with scale up to 500 mm - Complete coolant system - Saw blade tension electrically monitored - 1 saw blade on the machine 6/10 ZpZ - Saw blade drive with limit stop - Operating instructions and spare parts list (digital) - Paint finish anthracite (RAL 7016) Subject to technical modifications. The machine consists of two parts and must be assembled according to the assembly instructions. You will receive details of the exact delivery time in the order confirmation.

Condition: excellent (used), foot operated, water cooled swing lever spot welding machine make DALEX type SF 25-1 SWA2 rated power at 50 % ED: 25 kVA sec. short-circuit current: 22,4 kA Sec. open-circuit voltage: 5.2 V electrode force: 278 daN equipped with: Swivel armature for arm distance up to 550 mm projection: 700 mm add-on switch cabinet according to VDE 0100 Dusb E Sehx Ulhowr Tjt main switch synchronous welding control 1/01 TT

Condition: good (used), Year of construction: 1982, total height: 1,950 mm, back gauge: 800 mm, total width: 1,500 mm, total length: 2,800 mm, throat depth: 450 mm, overall weight: 3,700 kg, bending length: 2,550 mm, Bending length 2550 mm, capacity 66 to, gap between column 2050 mm, stroke 200 mm, throat gap 450 mm, motor 4,0 KW, back gauge 800 mm manual, dimension 2800x1500x1950 mm, weigth ca. 3700 kgs, tools Dob Eeu T N Dne Swr Tsut

Condition: good (used), Year of construction: 2008, Oerlikon Oxytome 25 HPC oxyfuel / plasma cutting system, Year of construction 2008, HPC CNC Control, travel X/Y 3000/1500 mm, extraction system, 2 tables, filter system, Dob Estrw Ete Swr Tjut Nertajet HP 125 cutting power source, OCP 150 plasma cutting source, Oxycut Mach oxyfuel torch, Installation dimensions 9m x 7m

Condition: good (used), Year of construction: 2001, ACF Cornerformer Multiflex Dusb E Sweumilajr Tjt

Year of construction: 1978, Condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm Dujbelp U A Io E Swr Tot table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 2022,

Condition: used, Year of construction: 2005, Functionality: fully functional, type of input current: three-phase, For sale hydraulic CNC press brake EHT TrumaBend S 85-25. High beam stroke 400mm in the range from 190mm to 590mm. Pressure 85 tons. Bending length 2550mm. 4 bumper axes: R, X, Z1, Z2. Sliding lower tool beam. Tools included. For more information, please contact me. Deb Eouc Ulio Swr Tsut

Condition: good (used), Year of construction: 1969, Bending length 2550 mm, capacity 75 to, gap between column 2050 mm, stroke 200 mm, throat gap 300 mm, motor 7,5 KW, back gauge 400 mm manual, dimension 2700x1400x1900 mm, weigth ca. 4000 kg Dueb E Swrsqvm Nfs Tot

Year of construction: 2024, Condition: new, Functionality: fully functional, New blower stage, unused, exact equivalent of Aerzen GM 25 S Deb E Swjr Iz Ugor Teut

Condition: reconditioned (used), Functionality: fully functional, Year of construction: 2014, operating hours: 14,500 h, load capacity: 2,500 kg, lifting height: 3,100 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: free lift with telescopic boom, construction height: 2,175 mm, battery capacity: 560 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: SE, rear tire type: SE, Equipment: lighting, trailer coupling, Test drive and on-site inspection possible Electric forklift truck RX60-25 // Refurbished Year of construction : 2014 Operating hours: approx. 14,500 h Load capacity : 2.500 KG Drive : Electric Battery : 80V year 2017 incl. capatest Mast : NiHo with special free lift Overall height : 2.175 mm Mast free lift : approx. 1,600 mm Hydr. auxiliary system : Double Nominal lift height : approx. 3,100 mm Hydraulic actuation : Multi-lever Tires : 4-wheel superelastic black Fork length : 1.200 mm Attachment : against surcharge Driver's cab: Weather protection I (roof and windshield) Driver's seat : MSG 65 FEM test : New, workshop tested Paint : Refreshed Lighting : Working lights front / rear Djb E Swovb Ar Her Tsut Charger : 80V suitable incl.

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: WHN13,8CNC, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, table load: 18,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table width: 2,500 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,600 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, spindle stroke: 800 mm, Equipment: rotational speed infinitely variable, I allow you to install a TOS WHN 13 CNC leveler (x 5000mm, y 3000mm) from 2008. The machine is fully functional under current, very good technical condition. The machine is located in the Czech Republic. It is equipped with e.g. angle head, angles, tools, ... . Heidenhain 530 control system. Dusb E Swrovplz Ho Tot

Condition: used, Year of construction: 2016,

Condition: used, machine/vehicle number: hammer-1, Hydraulic breaker, year of manufacture: unknown, as the type plate is missing, ready for operation, MS21/MS25 adapter plate, carrier is a Komatsu PC 210, this can also be purchased, Djb E Swsim Araor Tout The breaker can be attached to the existing excavator and tried out. Mr. Ebert (Tel. will be happy to assist you, Further information can be found on our homepage, Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 10857, installation height: 2,200 mm, pressing force: 315 t, table width: 2,500 mm, table length: 1,000 mm, ram stroke: 1,100 mm, TECHNICAL DETAILS Total pressing force: 315 t Ejector force: 2 x 125 kN Ejector as hold-down device: 2 x 250 kN Stroke: 1,100 mm Tool weight on ram max.: 6,000 kg Installation height: 2,200 mm Table clamping surface: approx. 2,500 x 1,000 mm Ram clamping surface: approx. 2,500 x 1,000 mm Speeds Rapid traverse from: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s MACHINE DETAILS Power requirement: 158 kW Machine weight: approx. 44 t Height above floor: approx. 6,175 mm Dob E Sweu Unlgsr Tjut

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Dusb E Sjvbd Ezswr Tjt Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: reconditioned (used), Functionality: fully functional, Year of construction: 2016, operating hours: 2,100 h, load capacity: 2,500 kg, lifting height: 4,590 mm, free lift: 1,550 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,175 mm, gearing type: automatic, fork length: 1,200 mm, tire condition: 80 %, front tire type: SE, rear tire type: SE, Equipment: cabin, lighting, sideshift, trailer coupling, Make : Still Type : RX70-25 Load capacity : 2.500 KG Drive control : Single pedal Drive : Diesel engine VW 1,9l SDI, 30 kW Year of construction : 2016 Operating hours : approx. 2,100 h Lifting mast type : Triplex / Triple Overall height : 2,175 mm Free lift : 1.550 mm Nominal stroke : 4,590 mm Auxiliary hydraulics : Single Hydraulic actuation : Mini lever with armrest Attachment : Sideshift Fork length : 100 x 40 x 1.200 mm 2A Dueb Eevb Agqe Swr Tot Cab : Driver's cab with heating Driver's seat : MSG65 synthetic leather Tires : 4-wheel superelastic, black Lighting system : ASW front + rear Technology : Workshop tested FEM test : New Paint : Refreshed Inspection and test drive possible on site!