Used Allcat Pt 1865 for sale (53,313)

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch Bwslijuy S Sdel Nw Asl - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: good (used), Internal article no.: 24018 HSK-A63 Boring head / fine boring head digital Bwelil Nwstrx Eve Asl Wohlhaupter Multibore D65-83

Condition: excellent (used), Optical Control Model: OC-SCAN CCX.3 The OC-SCAN CCX.3 is a non-contact component counter specifically designed for SMD production. It uses X-ray technology to count electronic components such as SMD reels, matrix trays, cut tape, and sticks with an accuracy of over 99.9%. Key Features: Automatic component detection: The machine detects and counts unknown components without prior programming. Bwjlilewdwvks Nw Ajl Quad-Count Mode: Allows simultaneous counting of four reels in just 20 seconds. Drypack Support: Takes into account the interference caused by dry packs and counts only the components. Order Counting: Counts components precisely according to the customer order. Integration with ERP systems: Compatible with systems such as SAP or ASM SiMM for seamless inventory management. 2D Inspection: Enables the inspection of printed circuit boards and electronic components. ​ ​Technical specifications Counting accuracy: >99.9% Counting time:

Year of construction: 2014, Condition: used, Komptech Cribus 3800 mobile drum screen, built in 2014 Manufacturer: Komptech Type: Cribus 3800 Year of manufacture: 2014 Power rating: 30 kW Diesel generator: 48 kVA Screen drum length: 6000 mm Screen drum diameter: 2200 mm RPM: 20 Throughput: up to 220 m³/h (depending on material) Transport dimensions: 12000 x 2550 x 4000 mm Weight: 18000 kg Material feed Bunker volume: 5 m³ Feed length: 4000 mm Feed width: 1675 mm Feed height: 2950 mm Material discharge Discharge height of coarse fraction (30°): 3500 mm Fine fraction discharge height (30°): 3350 mm Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Bwelil Nwewdvu Eo Ael This offer is subject to change without notice, prior sale, and cancellation at any time. Inspections are possible by appointment. Sales are subject to advance payment and are ex works, without warranty or guarantee.

Condition: ready for operation (used), travel distance Z-axis: 300 mm, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, controller manufacturer: Yasnac, total height: 2,600 mm, total length: 1,640 mm, net weight: 2,300 kg, total depth: 2,349 mm, CNC tapmill center OPTIONAL: Kitagawa Autodex 4th axis on table Table dimensions: 600 x 380 mm Admission in spindle (ISO): BT 30 Power on the spindle: 5,5 / 3,7 kW Drilling-capacity: dia 20 mm Tapping-capacity: M16 x 2.0 Number of axes: 4 Toolchanger: yes Bwsliewdkpqjl Nw Ajl Number of toolholders: 14 positions Number of rotations: 10 > 8000 rpm

Condition: good (used), Year of construction: 2008, Machine type: Pillar drill Manufacturer: OPTIMUM Model: B 30 BS Vario Year of manufacture: 2008 Condition: good Type of offer: used machine Technical data: Drilling diameter: 30 mm Drilling depth: 125 mm Speed range: 50 - 4000 rpm Spindle mount: MK4 Thrust: 285 mm Drive: 2.2 kW 230 volts Remark: Bolil Nevgfilsw Aewl Electrically adjustable speed adjustment, Thread cutting device, Coolant device, Drill chuck, Digital speed display, Digital drilling depth display Weight: 280 kg The machine is in good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Bwjlouy S R Toil Nw Ajl Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Scanworks V5 laser scanner with interface to Hexagon Cimcore/Romer measuring arms. Bsliljwfgpcj Nw Aowl We used to operate it with a Romer V7 measuring arm and no longer need it. Scanworks V5.7 64-bit point cloud acquisition software is included. Complete package with controller, laser, calibration sphere, cables, certificates, and software. Ideal as a replacement for existing systems to ensure reliability.

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Bwjlil Newdiwysw Asl Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: used, 8015605, CWA30 203120, CYBEROPTICS, Optical Sensor Model: 8015605 Bwelil Novrha Rsw Asl Type: CWA30 203120 Condition: Used

Condition: ready for operation (used), machine/vehicle number: JOO0028559, Condition Used Stock Number 8B This listing is for a IKA Eurostar PWR CV Overhead Stirrer. The unit is in full working condition and is ready for immediate release. Bwsljwf S Udoil Nw Ael The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs. Key Features: Speed Range: Features a versatile speed range of rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology. Safety Circuits: Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection. Constant Speed: Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance. Stirring Quantity:

Year of construction: 2018, Condition: ready for operation (used), This JENOPTIK HOMMEL ETAMIC T8000 Wavemove was manufactured in 2018. A reliable machine tool, it offers precise measurement capabilities for various applications. Consider the opportunity to buy this JENOPTIK HOMMEL ETAMIC T8000 Wavemove machine tool. Contact us for more information. Bwsliowc Euxel Nw Asl Application Types Measuring

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 50 CNC milling machine direct from the manufacturer. - Machine in column construction made of cast iron for high rigidity - Carousel tool changer with 8 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 10 kVA Milling spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 24 Nm Drive motor S6-30% operation 5.5 kW Torque drive motor S6-30% operation 36 Nm Spindle holder BT 30 Coolant system Coolant pump output 450 W Tank capacity 70 liters Milling accuracy Repeat accuracy 0.015 mm Positioning accuracy 0.015 mm Tool changer Carousel type Number of tool positions 8 positions Tool diameter max. 100 mm Tool length 200 mm Bwoleuy Nh Njil Nw Ajl Tool weight max. 6 kg Tool change time according to VDI 2852 7 seconds Travel distance X-axis 330 mm Y-axis 220 mm Z-axis 320 mm Feed drive Rapid traverse X-, Y-, Z-axis 15 m/min. Motor torque X-axis 3.5 Nm Y-axis 6 Nm Z-axis 6 Nm Speed range Speeds* 10,000 min-1 Pneumatics Air pressure 6 bar Milling table Distance spindle - table 90 - 410 mm Distance spindle - column 280 mm Table length x width 690 x 225 mm T-slot size / number / distance 14 mm / 3 / 63 mm Max. load 150 kg Dimensions Length x width x height 2,030 x 1,600 x 1,980 Total weight 1,900 kg

Condition: new, Catalogue number O231 - new machine, in stock - CE certificate TECHNICAL DATA - engine power 5.5 kW (7.5 HP) - feed motor power 0.5 kW (0.75 HP) - shaft diameter 120mm - rotational speed 5500 rpm - feed speed 4 – 20 m/min - max. width of processed material 630mm - min. length of processed material 280mm - max. height of processed material 300mm - smallest thickness 5mm - max. cutting depth 8mm - number of knives 4pcs - diameter of exhaust port 160mm - machine dimensions 1250 x 1270 x 1180 mm - weight 870kg Belierrg Uwel Nw Ajwl OPTIMAT TYTAN G630 Thicknesser Catalog number O231 - new machine, in stock - warranty, CE certificate TECHNICAL DATA - engine power 5.5 kW (7.5 HP) - feed motor power 0.5 kW (0.75 HP) - shaft diameter 120mm - rotational speed 5500 rpm - feed speed 4 – 20 m/min - max. width of processed material 630mm - min. length of processed material 280mm - max. height of processed material 300mm - smallest thickness 5mm - max. cutting depth 8mm - number of knives 4pcs - diameter of exhaust port 160mm - machine dimensions 1250 x 1270 x 1180 mm - weight 870kg Original photos Net price: PLN 35,000 Net price: EUR 8,200 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2022, operating hours: 2,143 h, Type of fuel: Diesel Year of manufacture: 2022 Bslilswgdmhe Nw Aewl Colour: Green Field of application: Agriculture Drive: Track Empty weight: 27.000 kg CE mark: yes Komptech Terminator 5000 S HC. Year: 2022. Hours: 2143. Weight: 27.000 kg. CE Machine. Central greasing system. Cat C13 engine. 328 KW. 2 way convenyor. Radio Remote Control. Pads: 500 mm. UC: 80%. ID NR: 236. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, IR 50 Power supply, JENOPTIK, power supply Model: IR 50 Power supply Condition: Used Bslil Nwjur Sh Ue Ajwl

Condition: ready for operation (used), Year of construction: 1998, FPT SIRIO 8 CNC TNC 430 column milling machine X 8000 Y 1200 Z 2000 Bwslil Nowgmp Eew Aol Automatic head 144 x 144 Speed 3000 rpm - BT 50 - Center coolant ATC 60 stations Fixed table 6000 x 2500 x 300 Rototranslating table 1500 x 1500, stroke 1500 - Permissible weight 10 t Chip conveyor

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Bslil Nevvi Auow Ajwl Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, Description Bjlil Nwshx Uhwj Ajwl For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (Dungs DN 65). 1. Burner type: WM-G30/1-A Power: 350 - 2800 kW Version: ZM-LN Year of manufacture: 201$ Connection pressure: 15-500 mbar - Delivery is available upon request - All technical data can be seen in the pictures. Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typos or data transmission errors.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate Bwolil Nsvw Rnnow Aol TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: used, IR50, JenLas® disk IR 50, JENOPTIK disk laser Bwslil Nwora D Drj Ael Model: IR50 Type: JenLas® disk IR50 Condition: Used

Condition: excellent (used), Year of construction: 2010, WEISHAUPT WM-G30/2-A gas burner, 4100 kW, with gas train. Power: 450-4100 kW Model: ZM Bwelil Nowg Hkcsw Asl Year of manufacture: 2010

Condition: used, CLS 9000 MV-R, Zett Optics LED high-performance light source Bwsleq S S Tzeil Nw Asl Model: CLS 9000 MV-R Condition: Used

Condition: excellent (used), Year of construction: 2004, WEISHAUPT G11/1-D gas burner - 4750 kW, with gas train. Power: 900-4750 kW Model: ZMD Bweliswg Hg Rjl Nw Aol Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2016, WEISHAUPT WM-G30 gas burner - 3800 kW, with gas train Power: 400-3800 kW Bwslijwg Hdisl Nw Aol Model: ZM-LN Year of manufacture: 2016