Used Lvd Pp 70T X 2500 Mm Cnc for sale (76)

Condition: used, functionality: unexamined, Year of construction: 1999, machine/vehicle number: 26579, control type: PLC-controlled, bending force (max.): 110 t, working width: 3,050 mm, pressing force: 110 t, working length: 3,050 mm, Used press brake Ijdpfxjw Afccs Af Sjtr 110 tons 3 meters 6 axes Technical specifications Voltage: 400 V Model: PPEB 110/30 Pressing force: 1100 kN Working length: 3050 mm Distance between uprights: 2600 mm Stroke: 200 mm Table/ram gap: 400 mm Throat depth: 400 mm Approach speed: 130 mm/s Working speed: 12.4 mm/s Return speed: 115 mm/s Motor: 15 kW Oil capacity: 250 liters Machine weight: 9500 kg CNC control: CADMAN Table width: 150 mm Noise level: 80 dBA Pump flow rate: 38 l/min Pump type: Voith IPV 4-25 High precision and flexibility. The PPEB press brake is a robust, highly technological machine. PPEB gives you the freedom to configure your press brake according to your production requirements. Automatic crowning The crowning system compensates for machine deflection to ensure accurate and repeatable bends. Our wedge system is custom-made for every machine, representing crowning across the entire table length. Robust structure A single-piece welded frame ensures machine accuracy.

Condition: ready for operation (used), Hydraulic press brake LVD PPEB-EFL 220/30 CADMAN CNC Year of construction 2004 Serial number 28652 Technical specifications Force 2200kN Working length 3050mm Distance between uprights 2600mm Stroke 450mm Distance table – ram 685mm Gap 405mm Iodpfxowcqpbo Af Sotr Approach speed 100mm/s Working speed 9.5mm/s Return speed 110mm/s weight 16500 kg motor 22kW oil 350L Dimensions according drawing attached CADMAN CNC 2D graphic controller •Easy form laser EFL 130mm – W axe • Table PP8170 V-axe – table width 120mm • Wila hydraulic top tool clamping • LVD bottom tool clamping hydraulic • Back gauge DUO X X’ R Z1 Z2 (X 600mm) • Security; CE PP3580 – lasersafe PP5320

Condition: used, Year of construction: 1980, pressure 50 t chamfer lenght 2500 mm distance between columns 2050 mm throat 200 mm table width 140 mm table height 750 mm distance table - lower edge of ram 300 mm Ijdpfoxc Nwzsx Af Sotr max. ram stroke 100 mm closing speed 9 - 160 mm/sec return speed 55 mm/sec voltage 380 V / 50 Hz engine output 4,1 kW total power requirement 5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. Ijdpowbgizofx Af Setr - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: good (used), Year of construction: 2008, control type: CNC control, actuation type: hydraulic, pressing force: 300 t, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Itjdpfowrza Ajx Af Sor

Condition: excellent (used), Year of construction: 2016, pressure 400 t chamfer lenght 6100 mm distance between columns 5050 mm stroke 600 mm distance between table / ram 870 mm throat 600 mm table width 300 mm closing speed 100 mm/sec working feed 11 mm/sec return speed 120 mm/sec total power requirement 37 kW Isdju N Iy Nspfx Af Sstr weight of the machine ca. 65 t dimensions of the machine ca. 8520 x 8550 x 5325 mm

Condition: used, Year of construction: 2003, punching pressure 16 t Iodpfxed Ih Spj Af Sjtr plate thickness 8 mm plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW control Cadman CNC voltage 400 V weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 m

Condition: used, Year of construction: 2005, operating hours: 34,000 h, pressure 170 t chamfer lenght 3050 mm distance between columns 2700 mm Stroke beam 300 mm 520 mm 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec 600/1000 mm 200 mm Z1+Z2 axes controlled by cnc 0-2500 mm Isdjru Rz Sspfx Af Sstr Number of working hours 34000 h Dimensions of machine: length 3600 mm width 1950 mm height 3300 mm weight 12000 kg Control Cadmann total power requirement 24 kW dimensions of the machine ca. 4x2x3,3 m

Condition: good (used), functionality: fully functional, Year of construction: 1997, degree of automation: manual, working width: 4,000 mm, distance between stands: 3,145 mm, overall weight: 10,500 kg, total length: 4,180 mm, total width: 1,600 mm, total height: 2,665 mm, LVD PPT165 COPY 4000 mm 165 T Iodow Eawyepfx Af Setr Easy to operate. Not CNC. Transport can be arranged. It appears the machine is a copy of LVD. Sold by SH Trading.

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 31652, pressing force: 80 t, Year 2007 Serial 31652 6 Axis Laser safe Upper attachment Wila hydraulic Itjdpfx Afsvcc Eie Sjr Lower attachment LVD hydraulic Software : CADMAN-B

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,700 h, machine/vehicle number: 0126427-027, Equipment: type plate available, LVD STRIPPIT GLOBAL 30 1225 Turret Press Itedpfx Aswptdujf Ssr Machine in very good technical condition, used at Alsanit. Regularly serviced only by the manufacturer's service. Service parts used in the service - only new and original. The turret press is in continuous production use. If you are interested, we encourage you to make an appointment to confirm the technical condition and technological capabilities of the offered machine. It is possible to provide a video presenting the operation of the turret press, please send an inquiry with a request for sharing. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of production of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine mileage: 83700rh Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC :GE FANUC 180 IP Maximum travel in the X axis: 2,576 mm Maximum travel in the Y axis: 1,337 mm Maximum table load (even): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per min (die fi 25 mm); ±2% 400 min-1 Number of strokes per min ("nibbling" function - 2 mm): 1000 min-1 Number of strokes per min (marking/0.5 mm): 1700 min-1 Maximum feed rate (speed) in the X axis: 83 m/min Maximum feed rate (speed) in the Y axis: 73 m/min Number of tool sockets (stations) in the turret: 30 pcs. Station A – max. diameter 12.7 mm: 8 pcs. Station B – max. diameter 31.7 mm: 16 pcs. Station C – max. diameter 50.8 mm: 2 pcs. Station D – max. diameter 88.9 mm: 4 pcs. Number of indexed (rotary) stations in the revolver: 4 pcs. (D stations) Note: A multitool can be placed in each D station (1 multitool has 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Working sheet size: 1,250 x 2,500 mm Number of sheet metal clamps (individually programmable): 3 pcs. Tilting work chute for cut parts: 450 x 500 mm Electric power supply 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Waste conveyor; Brush table The LVD Strippit Global 30 punching machine has 4 programmable rotary stations (size D). Each station can be equipped with a multitool head with automatic rotation. Using a servo drive, as well as CNC control - both the rotary stations and the entire turret have the possibility of bidirectional rotation with an accuracy of 0.01 degrees. The Auto Index rotary stations of the LVD Strippit Global 30 punching machine operate on the principle of direct drives, which are located directly above the station, constituting part of the turret mechanism. In the rotary stations with a diameter of 88.9 mm, a multitool tool holder can be mounted, thus increasing the machine's capabilities and the number of tools. The multitool holders allow for the installation of 3 or 8 punches and dies with a diameter of 12.7 mm or 31.7 mm, respectively. We issue a VAT invoice The price given is a net price!

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Itedpfxer Ezv Uj Af Ssr Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Year of construction: 1993, condition: ready for operation (used), Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Iodpjw Na Huofx Af Sstr

Condition: good (used), functionality: fully functional, 3050 x 110 tons 3 Axes CN CYBELEC DNC 880 S Distance between mountains: 2550 mm Course: 130 mm Distance max table coulisseau: 310 mm Table size: 180 mm Engine power: 14 kW Itodpevrw Iksfx Af Ssr Outillage haut et bas neuf. Dimensions: 3500 x 2100 x 2500 mm Poids: environ 7500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, Lvd PPEB 110/20 MNC 95 Sheet metal bending machine Good condition Includes machine manual Iodpov Er T Uofx Af Sotr Machine weight: ca.9480 kg Width: 3600 mm Length: 2700 mm Height: 3000 mm

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: documentation/manual, LVD Hydraulic Shears Iodpowp Rxcjfx Af Setr Type HSL40/12.7 Year 12: 1991 4 mm by 12 mm

Condition: used, total length: 3,000 mm, total width: 2,400 mm, total height: 2,300 mm, Weight: 7.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2500 - Transport dimensions: 3000mm x 2400mm x 2300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information Itsdpfx Aewmq Ilof Sjr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2012, operating hours: 11,000 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 16i-LB This LVD Orion 4KW was manufactured in 2012. It features a Fanuc Series 16iLB control and a FANUC Laser C400i-B source, ensuring reliable operation. With 11,000 working hours and a sheet size capacity of 1500 x 3000 mm, it includes a loading & unloading station. Regular maintenance has been performed by the manufacturer. Contact us for more information about this machine. Ijdjx D Ebfjpfx Af Sstr Application Types Cutting

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Ijdpfx Asx Icknof Setr Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: ready for operation (used), controller manufacturer: Touch-L, laser power: 10,000 W, travel distance X-axis: 6,280 mm, travel distance Y-axis: 2,070 mm, total length: 17,200 mm, total width: 6,300 mm, total height: 3,360 mm, empty load weight: 21,500 kg, Gemonteerde opties: - automatische nozzlewisselaar - schroottransportband Workpiece dimensions: 6160 x 2035 mm Type of Laser: LVD Hight travel Z-axis: 130 mm Travel speed: 140 m/min Max cuttingthickness in steel: 25 mm Max cuttingthickness in Inox: 30 mm Motor Power: 75 kW Isdpfx Afexqh Sgo Sstr Shuttle table: yes

Condition: used, total length: 6,400 mm, Weight: 17.500 kg Itedpfx Afewnhp No Sjr Price: On request - Documentation available: Yes - CE certificate present: No - Serial number: 13707 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge depth [mm]: 1000 - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2015, operating hours: 22,192 h, condition: ready for operation (used), Control Unit Brand FANUC Itjdpfx Aex D E Ifjf Sjr Additional Equipment Scope of delivery includes: Machine /Laser source / Cooler / Extraction unit / Various wear parts such as nozzles and lenses/ Additional lens holders This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Year of construction: 1993, condition: ready for operation (used), General Data Machine weight 4000 kg This LVD HST 25/6 hydraulic shearing machine was manufactured in 1993. It is a robust and reliable piece of equipment, ideal for shearing applications. Consider the opportunity to buy this LVD HST 25/6 hydraulic shearing machine. Contact us for more information. Isdpfx Afex D Erko Setr Application Types Shearing

Year of construction: 2005, condition: ready for operation (used), Main Drive Number of axis 3 Laser power 4 kW Additional Equipment Turbo blower: approximately 15000 hours Extraction: approximately 20000 hours Capacitive sensor High-pressure cutting Itsdpfjx D I Dpex Af Sor Laser Eye Shielding and photocells Filter system LM2000 - NC focus cutting head Cutting head with 5", 7.5", and 10" lens mount 5", 7.5", and 10" lens (high-pressure) with cassette This 3-axis LVD Impuls 4020 was manufactured in 2005, featuring a CO2 laser cutting machine with 4000mm x 2000mm shuttle tables, a high-pressure cutting system, and a LM2000 - NC focus cutting head. It includes a cutting head with 5", 7.5", and 10" lens mounts and a robust 160 IL control unit. Consider the opportunity to buy this LVD Impuls 4020 CO2 laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,700 h, General Data Machine weight 15000 kg Measurements height 2250 mm Measurements depth 4895 mm Dimensions Machine Length 11000 mm Movement X-Axis Movement 3080 mm Z-Axis Movement 100 mm Y-Axis Movement 1555 mm Isdpfxsx D En Ee Af Sotr This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and features a 4kW fiber laser by Rofin/Coherent. It includes automatic shuttle tables, a cutting head with lens systems, and automatic functions for nozzle cleaning, height calibration, and gas selection. The machine supports a maximum sheet size of 3050 x 1525 mm and offers high-speed positioning. If you are looking to get high-quality cutting capabilities, consider the LVD Electra-FL 3015 machine we have for sale. Contact us for more information. Application Types Cutting