Used Lvd 150 T for sale (74)

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih Itjdpfx Adovh Ndperoh no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, Hydraulic shear LVD HST-C 40/6.35 Year of construction 1998 Serial number 25379 Technical specifications Max sheet thickness 6.35 mm Cutting length 4050 mm Back gauge range 1000 mm Cutting angle 0.5°-2° Blade clearance 0,05-0.8 mm Number of strokes per min 10-45 Number of hold dawns 21 motor 7.5kW weight 9500 kg oil 150l Voltage 3 x 380V included : ELGO P85 for back gauge Security norms CE 1 square arm from support L1000mm 1 extra support L1000mm Iodpfxjxcf Snj Adrsth

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Iedpfxjyag Uao Adrjth Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: ready for operation (used), Year of construction: 2010, sheet thickness (max.): 13 mm, overall weight: 12,000 kg, cutting length (max.): 3,100 mm, CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details. • Maximum cutting thickness: 13 mm Itedpfx Asy Twurjdrsh • Backgauge range: 1000 mm • Motor power: 21.5 kW Additional equipment • 1 new cutting blade

Condition: good (used), functionality: fully functional, Year of construction: 1993, For sale is a panel shearing machine from the manufacturer LVD. Technical data: Manufacturer: LVD Cutting width: 3,000 mm Max. cutting thickness: 13 mm (steel) Back gauge: 1,000 mm Weight: approx. 9,000 kg The machine is currently powered and can be inspected by prior appointment. A functional test on-site is possible. Further information is available upon request. Subject to changes, errors and prior sale. Isdpfjzb Rt Nsx Adreth Available from week 30.

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical data: Maximum pressing force: 2,200 kN (220 tons) Working length: 3,050 mm Width between uprights: 2,600 mm Maximum ram stroke: 450 mm Max. table overhang distance: 685 mm Feed (overhang): 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: adjustable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other specifications: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Axes: Y-axis – Upward and downward movement of the beam Iodjyhdyiopfx Adreth X-axis – Approach and bending distance adjustment R-axis – Approach and downward movement 2 x Z-axis – Lateral and counter movement stop 2 x Z-axis – Forward and backward movement with slight inclination of the X-axis V-axis – Easy-Form laser crowning – bending distance compensation

Year of construction: 2019, condition: ready for operation (used), number of axes: 3, This 3-axis LVD Load-Assist 4020 was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm, making it suitable for various applications. If you are looking to get high-quality automation capabilities, consider the LVD Load-Assist 4020 machine we have for sale. Contact us for further details. • Max sheet size: 4000x2000mm Isdpfx Adoy Sakmoroth

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) Itsdpfx Ajy I Dbbjdrjh equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Model: HST 40/6 Location: Strojrem, Križevci Year of production: 1993 Bending length: 4050 mm Iodpjvtl Nrsfx Adroth Max bending thickness at 45 kg/mm²: ~6 mm Working stroke: 1000 mm Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: used, LVD Shear Type HST C-10/31 Isdpfx Adjx Tqtbjroth Capacity 3000 x 10

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Laser source: Rofin FL030 fiber laser source Source serial number: 987 Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Isdpfeyhppvox Adroth Automatic loading/unloading table Light guard – light protection system

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,700 h, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, overall weight: 15,000 kg, total height: 2,250 mm, product length (max.): 11,000 mm, This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and features a 4kW fiber laser by Rofin/Coherent. It includes automatic shuttle tables, a cutting head with lens systems, and automatic functions for nozzle cleaning, height calibration, and gas selection. The machine supports a maximum sheet size of 3050 x 1525 mm and offers high-speed positioning. If you are looking to get high-quality cutting capabilities, consider the LVD Electra-FL 3015 machine we have for sale. Contact us for more information. • Production Hours: • Machine: 15700 hours • Lasersource Laser On Time: 9980 hours • Type: Sinumerik 840Dsl / B&R APC 910 • Operating System: Windows® 7 Embedded • Memory Capacity: 4GB RAM / 60GB SSD • Screen: 19” LCD Touch Screen Itodpsx D En Esfx Adroh • Network Card: 1Gbit/sec RJ45 Connection • USB Interface: 2 x USB 3.0 on Front Panel • Max. Positioning Speed X-Y: 170 m/min • Max. Positioning Speed Z: 30 m/min • Smallest Programmable Increment: 0.01 mm • Positioning Accuracy: 0.05 mm • Repeatability Accuracy: 0.025 mm • Maximum Sheet Size: 3050 x 1525 mm • Maximum Sheet Weight: 700 kg • Automatic Shuttle Tables • Cutting Head with 5” or 7.5” Lens System • Automatic Nozzle Cleaning and Height Calibration • NC-Focus, Automatic Focal Point Adjustment • Cutting Head with Crash-Protection System • Capacitive Height Sensing • Automatic Cutting-Gas Selection: Oxygen, Nitrogen, Air • Automatic Gas Pressure Control with Servo Valve • Automatic Sheet-Referencing (Laser Eye, Capacitive System) • High Pressure Nitrogen Cutting • TPC Total Power Control, Adapting the Laser Power Relative to the Speed • Chiller & Extraction Filter Included • Light Guards Protecting the Area Around the Shuttle Tables • 19” Touch Screen with New User-Friendly Touch®-L Interface • Automatic Start-Up / Shut Down • Tele-Service Available • Built According to the European Safety Regulations Provided with CE-Mark • Automation Ready Dimensions Machine Depth 4895 mm

Condition: used, Year of construction: 2003, punching pressure 16 t plate thickness 8 mm Isdpfx Ajd Ih Spodrsth plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW control Cadman CNC voltage 400 V weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 m

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal Iedpfx Adjtvb Iusrsth

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. Itsdpfx Aoxwmugsdroh guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Year of construction: 2000, condition: excellent (used), LVD Delta 1250 in perfect condition with many tools. X Y - 2500 x 1250, plus reposition Iodpergqrnsfx Adreth 2 x Indexing head

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min Isdpfxewrza Ae Adroth X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: used, Year of construction: 1988, total length: 4,300 mm, total width: 3,000 mm, total height: 2,500 mm, Colour: Grey Weight: 13.700 kg - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 15322 - Drive system: Conventional - Drive type: Hydraulic - Configuration: Guillotine - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Transport dimensions: 4300mm x 3000mm x 2500mm (l x w x h) - Transport weight [kg]: 13700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Isdpfx Adjyym Ihorsth Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 6,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 6,000 h, laser power: 2,500 W, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 6 mm, LVD LASER ORION 3015 PLUS - 2.5kW Year of manufacture 2013 Iedpfxsy Av Nms Adreth

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Itsdjuipu Espfx Adroh Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Hydraulic press brake LVD PPEB-5 135/4000 CADMAN CNC Year of construction: 2004 Serial number: 29443 Technical specifications Force: 1350 kN Working length: 4000 mm Distance between uprights: 3150 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 12 mm/s Return speed: 115 mm/s Weight: 11,500 kg Motor: 15 kW COMMAND CONTROL CADMAN CNC 5 axes • Table PP8170 V-axis • 2 front supports PP1110 • Wila top tool clamping – hydraulic PP3100 Iedpfjy Avptsx Adrjth • Back gauge X -R -V • Distance reach X axis: 600 mm • Lasersafe security guard CE

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Itjdpfxey Avnpo Adrjh Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Hydraulic press brake LVD PPBL 40/20 Year of construction: 1999 Serial number: 25656 Technical specifications Pressing force: 400 kN Working length: 2000 mm Distance between uprights: 1640 mm Stroke: 100 mm Itsdpfsy Avr Uex Adroh Distance table – ram: 300 mm Throat depth: 200 mm Table width: 140 mm Approach speed: 80 mm/s Working speed: 10 mm/s Return speed: 90 mm/s Weight: 3300 kg Motor: 3 kW Options included: ELGO P8822 for X and Y axes 2 fingers on the back gauge

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) Itodpfx Aezcqy Sedreh - Operating instructions

Condition: used, Press Brake Isdpfex Tqt Usx Adroth Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW