Used Haco Pph 60T X 2000 Mm for sale (93)

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, power: 22.5 kW (30.59 HP), total length: 4,780 mm, total width: 1,750 mm, total height: 2,150 mm, empty load weight: 11,500 kg, workpiece length (max.): 4,100 mm, Haco TS 4100 x 12 mm CNC Strokes/min: 6 > 10 str/min Adjustable cuttingedge: 0,5 > 3° Duedpfx Aeygyxfof Dsn Number of sheet holders: 23x

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 330 mm, installation height: 500 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 6,500 mm, total width: 1,980 mm, total height: 3,700 mm, power: 22.5 kW (30.59 HP), travel distance Z-axis: 250 mm, empty load weight: 33,000 kg, passage width: 5,050 mm, 7 assen: Y1 / Y2 / X / Z1 - Z2 synchro / V / R bovenste hydraulische klemming CNC-bombardement Ram capaciteit: 220 ton per meter laser safe beveiliging retrofitted with new 2D control Dujdpfxoydf Hco Af Don Capacity: 320 ton x 6100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Duodpox Ed H Aefx Af Don

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Dodpfx Afex Dr Dae Dsun Untested. Please request further details and photos. We can purchase your faulty press brake.

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling Dusdpsyapdqefx Af Den

Condition: used, Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece Duedpfx Asrdil Hef Djn -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

Condition: excellent (used), Technical data: Year of construction: 2000; revision in 2023 Working length: 3100 mm column width: 2650 mm Pressing force: 200 to CNC control: ESA S630, Windows Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation: Wila Moducrown throat depth: 250 mm Stroke: 200 mm Motor power: 15 kW Dimensions (length x width x height): approx. 3600 x 2200 x 2900 mm Weight: approx. 12 tons Dsdpfxor Idvpe Af Doun The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Dujdpfovy H Iiox Af Dsn Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, New and used controllers for press brakes. For replace, spare parts and retrofitting. Dedpfjx Hkrwsx Af Dsun Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Other types on request. We can buy your tired press brake for spare parts.

Condition: used, Year of construction: 1986, Used 4-meter conventional press brake Dodpfxswc Nl Io Af Dsun Type: PPH 40160 Capacity: 4100 x 160 ton Electric rear axle adjustment Electric depth adjustment 1 set of tools

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Dusdpex Dr U Ejfx Af Den

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, controller model: ATL 595, working width: 3,100 mm, power: 19 kW (25.83 HP), bending force (max.): 200 t, distance between stands: 2,600 mm, Refurbished machine Haco press brake type PPH 3m x 200T Duodpfxoxanm Ao Af Den New ATL 595 controller Motorized back gauge X axis European Standard type punches Monoblock die

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Lg.No. 22564 Dodpjin I Nbefx Af Djun Technical data: - Pressure capacity 150 t - working width 2600 mm - passage between the columns 2100 mm - table width 180 mm - throat 250 mm - installation height 325 mm - Drive 400 V / 7,5 kW - space requirement approx. W 3000 x H 2400 x D 1600 mm - weight approx. 7000 kg - with: - Two-hand control panel with foot switch

Condition: used, Year of construction: 2021, machine/vehicle number: 23948, working width: 6,020 mm, stroke rate (min.): 5 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), Details: - Sheet width: 6020 mm - Sheet thickness: 6 mm - Back gauge (adjustable): max. 1000 mm Dusdpfx Afsyh Arzj Djn - Strokes: 5 – 10 strokes/min. - Control: SC 100 T - Motor power: 11.0 kW - Machine weight: approx. 27,000 kg - Machine dimensions: 7650 x 2400 x 2885 mm

Condition: new, Year of construction: 2024, table length 3048 mm table width 1524 mm burner heads 1 stroke 270 mm speed 100 m/min dimensions 8900 x 2260 x 2220 mm weight of the machine ca. 7.500 kg Dusdpfjwp Thysx Af Den

Condition: used, Year of construction: 2009, sheet width 4050 mm plate thickness 6.50 mm thickness at "Niro-steel" 4.00 mm back stop - adjustable 1000 mm no. of strokes 6 - 11 Hub/min work height max. 880 mm Control SC 70 cutting angle 0.5 - 3.0 ° down holder 23 Stück engine output 11.0 kW weight of the machine ca. 7500 kg range L-W-H 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) good condition including special accessories such as sheet metal holding device - in checked condition - machine video - ?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge Dsdexaccropfx Af Doun * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Condition: used, Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Dusdpfexaa Dgox Af Don Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good/well-maintained condition (!!) Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device Dodpfx Afox Avq Ij Djun - Front finger guard - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Powered backgauge up to: 1000 mm - Rear area secured with light barrier - Front squaring arm: 1000 mm - HSLX version features: - CNC control HACO SC 5 controller (sheet thickness input in mm) - Automatic cutting angle adjustment by sheet thickness - Cutting length limitation - Automatic positioning of the backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction - Option for powered backgauge adjustment via 2 push buttons - Drive: 400 V / 22 kW - Electric foot pedal Duodpfx Afox D Uzzs Djn - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 9000 kg - The machine has been welded in various places by the previous owner and has only been repainted on the front side.

Condition: good (used), Year of construction: 2001, Used HACO guillotine shear Model HSLX 4006 Capacity: 4050 x 6 mm Djdpfsxwkcnox Af Djun Electrically adjustable back gauge, cutting angle, and blade gap

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier Dsdpox A Tpnofx Af Djun - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° Dodpexpi Dhofx Af Doun 1000 mm table height 930 mm work height max. 930 mm

Condition: new, Year of construction: 2025, 3050 mm Duedpfx Afswp Tduj Den 13,0 mm 0,5-2,5 ° 1000 mm work height max. 900 mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 950 kg, TECHNICAL DETAILS X-axis: 3,048 mm Y-axis: 1,524 mm Z-axis: 270 mm Control: CNC-ALPHA T2.0 Laser power: 6 kW Dynamics Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Positioning accuracy: ± 0.05 mm/m Repeatability: ± 0.05 mm Cutting Cutting gas: Nitrogen Cutting gas: Oxygen Material thickness: Mild steel: 25 mm (depending on cutting gas) Material thickness: Stainless steel: 20 mm (depending on cutting gas) Material thickness: Aluminum: 16 mm (depending on cutting gas) Material thickness: Brass: 12 mm (depending on cutting gas) Cutting table Number of pallets: 2 Number of motors: 1 Max. Table load: 950 kg MACHINE DETAILS Length: 8,900 mm Width / Depth: 2,260 mm Height: 2,220 mm Max. power consumption: 90 A / 44 kW Total weight: 7,500 kg EQUIPMENT - Welded frame construction made of carbon steel - Aluminum gantry made of an aerospace alloy with a honeycomb structure - Two-stage shuttle table with short table changeover times for high productivity - Table with synchronous motor and frequency drive for high positioning and repeatability Duedpfov N Hdisx Af Den - Pull-out drawers in the table for cleaning and disposal of small parts and slag - Modular cutting table with easy module replacement for easy maintenance - Manganese steel plates as table covers to protect the internal table structure - Effective fume extraction from the table through 6 individually controlled dampers - 4 fans in the machine roof ensure a continuous supply of fresh air and, in combination with a Powerful extraction system for a clean cutting chamber - Programmable automatic lubrication of the rack and pinion drive - Servo drive system from ALPHA/WITTENSTEIN or GUDEL - HIWIN/PMI precision linear guides for high precision and motion accuracy - PANASONIC drive motors for high speed and stability - Wireless CNC handwheel for controlling machine functions such as start/stop, calibration, edge detection, marking, and emergency stop - Industry 4.0 through cloud solution and real-time machine monitoring, remote diagnostics, and maintenance - Tricolor machine status display with LED and 360° visibility - Cameras for monitoring the cutting chamber and shuttle table with monitor - Machine with HSG P06 laser cutting head - Water cooler with dual-circulation cooling system and high cooling capacity - Voltage stabilizer for protection against overvoltage and undervoltage - SICK M4000 light barrier for the cutting table - Wear parts set with 2 protective lenses, 10 nozzles, and 1 ceramic ring - Machine complies with CE standards - Machine documentation in German, electronic

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall. Duedpfx Aslp Nrbof Djn