Used Maho Mh700C Cnc for sale (8,679)

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 Dolqswfrk Se U N Snocg EQUIPMENT/ACCESSORIES  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: used, Year of construction: 2012, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 5 kW Rotation speed max: 18.000 rpm Tool clamping system: ETP 25 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Dolowbgxvsq U N Snecg Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Safety device: enclosed cabin Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 6.0 Conformity marking: CE mark

Year of construction: 2018, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 420 mm Djloq Ilbweq U N Snscg MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm RAPID FEEDS X-Z: 24 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF WEIGHT: 3500 Kg OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Condition: good (used), Year of construction: 1996, Serial No. 489, Operating Hours 38,433, Control, TRAUB, Type TX8F, 7 axes, main spindle, counter spindle, 2 turrets, 2 C-axis, 1 Y-axis, TRAUB/Stamag bar feeder, Type DN61, coolant system, parts removal, chip conveyor, air filter, accessories - feeder coupling defective Dcelowazlboq U N Snsg +++ Attention: Machine is part of an online auction! +++

Year of construction: 2006, Condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Dcslq U N Sowftcvjnog

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Dslqjwcyfle U N Snscg Total number of tool changer positions: 38

Condition: excellent (used), Year of construction: 1990, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Dcjlq U Newfrhwj Sneg Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Z-axis: 1070 mm X-axis: 285 mm Tailstock: -Quill diameter: 100 mm -Quill stroke: 100 mm EQUIPMENT/ACCESSORIES Hollow clamping cylinder -Tailstock including live center -Coolant system: 300 l, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: used, Year of construction: 2008, Technical details: turning diameter: 315 mm turning length: 515 mm control: Siemens 810 D centre distance: 550 mm greates pass round over bed: 400 mm spindle bore: 42 mm tool taper: VDI 30 spindle turning speed - stepless: 6000 1/min rapid power traverse in X-and Z direction: 15 / 24 m/min drive capacity - spindle motor: 15,0 kW total power requirement: 25 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,20 x 1,35 x 1,86 m CNC lathe, turret, 12-pos., motorspindle "directdrive", tailstock MT 4, chipconveyor, collet chuck HAINBUCH, tooleye, direct measuring system, Delq U Nsumzl So Snocg ICZ 15 bar, parts-catcher in front-door, barloader SPINNER Servoload 80-1200, no live-tooling device on turret. spindle overhauled in September 2024 - 0 hours! *

Year of construction: 2002, Condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min DRIVEN TURRET HEAD: 12 POS; 6000 rpm Dcelqsmmlprs U N Sneg CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Condition: good (used), Year of construction: 2004, Serial No. 7041117, TX8i control system, 7 axes, 2x 10-station tool turrets, 2x C-axis, 1x Y-axis, driven tool stations, bar loading magazine, make FMB, type Turbo 10-72XT / 3,200 mm, max. bar diameter 72 mm, max. bar length 3,200 mm, chip conveyor, make KNOLL, type 240 S-1/50, coolant system - subject to prior sale - Delqjway S Ho U N Snecg +++ Attention: Machine is part of an online auction! +++

Year of construction: 1995, Condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Dcelq U N Sswftdgoneg

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Dolq U N Sowcyd Isnecg Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm Delq U N Sjupmhwjnscg travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Year of construction: 1995, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm Dcjlq Usiidpyj N Snog RAPID FEEDS X-Z: 15 - 20 m/min TURRET HEAD: 12 POS CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: good (used), Year of construction: 2006, Serial No. ST20G0030, control, manufacturer FANUC, type Series 31i-MODEL A, 6 axes, turning diameter max. 20 mm, turning length max. 200 mm, 5 driven tool stations, bar loading magazine, manufacturer FMB, type Turbo 3-26, bar length max. 3,200 mm, small parts dispensing device, chip conveyor, manufacturer FMB type ST20G, cooling lubricant system Delqoway Izo U N Snscg

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Dolq Uowcyc Ro N Snjcg Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, Year of construction: 1997, x-travel 1500 mm y-travel 800 mm z-travel 600 mm weight of the machine ca. 2,7 t dimensions of the machine ca. 2,66 x 1,60 x 3,10 m Installation and calibration of the machine can be supplied by the manufacturer MDM at site of installation at extra costs. CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. Dcolqsd Il A Re U N Snjg - SPC software for statistic evaluation of the measurements

Year of construction: 2014, operating hours: 8,674 h, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm Dcsljq H Tr Toq U N Snjg BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 11 KW Dslqjwcybao U N Snscg Number of controlled axes: 3 axes Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min bar diameter 51 mm spindle bore 75 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h Dolq U N Sjttckmsnscg - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (no tools in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Year of construction: 1992, Condition: ready for operation (used), - USED - BRIDGE-TYPE CNC GRINDING MACHINE LONGITUDINAL TRAVEL: 650 mm TRANSVERSAL TRAVEL: 450 mm VERTICAL TRAVEL: 500 mm VERTICAL SPINDLE TRAVEL: 130 mm TABLE SIZE: 770 x 630 mm MAX ADMITTED LOAD: 500 Kg DISTANCE BETWEEN THE COLUMNS: 750 mm Dslqjigrvdj U N Snscg DISTANCE BETWEEN SPINDLE AXIS-TABLE: 0-600 mm SPINDLE: 30.000 rpm CONTROL UNIT: FANUC 210 IS-M WEIGHT: 4000 Kg OVERALL DIMENSIONS: 2650 x 2000 x 3150 mm ACCESSORIES: RS 232 SERIAL PORT NOTE: MACHINE WITH SPINDLE 60/70.000rpm, SPINDLE 100/120.000rpm; MACHINE COMPLETELY OVERHAULED IN 2002

Condition: used, machine/vehicle number: 007022, X axis working area: 5250 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 26 Djlewcya Aeq U N Snjcg

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Delq Uswcyacs N Snjcg Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28 Dcolq Ujwcx U Sj N Snsg

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Djlqewcx T Ue U N Snecg Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8