Used Isal Pb70 Et for sale (101,509)

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Cgjlqeu Ix Dcjvignot Spitzen div. Zahnräder *

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, cooling capacity: 41 kW (55.74 HP), total height: 2,160 mm, total length: 1,980 mm, total width: 1,250 mm, Rooftop Air Conditioner CLIVET 41 kW Cjlqeu Snvpovignogt Cooling capacity: 41 kW Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Copeland (scroll) Number of fans: 2 pcs. Type of refrigerant: R-134a Dimensions: 1980 х 1250 х 2160 mm Condition: excellent

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Cjlqvovkvvqoignjgt

Condition: used, mileage: 905,000 km, power: 220 kW (299.12 HP), first registration: 05/2010, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 05/2025, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Setra 415 NF with 42 seats - Air conditioning - Automatic transmission - Matrix system - Euro 5 - * Diesel - 11,967 cc - 220 kW - 299 hp - Euro 5 - Green sticker - TÜV (German Technical Inspection Association) * 42 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - Cgslowcipajqvignjt * Auxiliary heating / Radio / ABS / ASR - Double-width rear door - Single-width front door - * Vehicle dimensions: Length: 11,950 mm x Width: 2,550 mm x Height: 3,400 mm * German vehicle - German vehicle registration document - Sold on behalf of the customer - * Subject to errors, misprints and prior sale - Available immediately - * Please arrange an appointment for a viewing and test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside the premises - Please inquire about the exact location - ATTENTION -

Condition: used, Functionality: fully functional, total height: 3,400 mm, manhole: porte rectangulaire, inner diameter: 3,000 mm, usable tank capacity: 22,000 l, TECHNICAL CHARACTERISTICS - Temperature-controlled tank - Make : ETA - Total capacity: 22,000 litres - Material : stainless steel ROOF - Closed - Balustrade VIROLE - 1 ladder support bar - 1 complete level tube - 1 tasting tap - 1 rectangular door - 1 partial drain valve with PVC plug - 1 full drain valve with PVC plug - 1 serpentine radiator Cgslqjv I A Tqjvignjt BOTTOM - flat DIMENSIONS - Diameter: 3000 mm - Height: 3400 mm

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button Cgslqviovzt Dysgnjt * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW Cgslqvijvvrpkegnst weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: good (used), Year of construction: 2002, Functionality: fully functional, cooling capacity: 383 kW (520.73 HP), type of cooling: air, overall weight: 4,000 kg, total width: 2,340 mm, total length: 4,900 mm, total height: 2,500 mm, Aircooled chiller Clivet WDAT 383 kW Cslqsvbg U Ssvignsgt Cooling capacity: 383 kW Year of manufacture: 2002 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Type of refrigerant: R407C Compressors: 2 pcs. Bitzer (screw) Number of fans: 10 pcs. Dimensions: 4.9 x 2.34 x2.5 m Weight: 4000 kg. Working hours: 11902/17472 h. Condition: Excellent

Condition: good (used), Machine is in good working condition. Cgjlqvijqzypmegnot

Condition: ready for operation (used), LBA 3010 folding bench folding bending machine folding bending machine Length: 3100mm Thickness: 1mm Max. Lifting height of the upper pressing beam: 80mm Weight: approx. 750 kg Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Cslqvigevga Tfonegt Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), power: 75 kW (101.97 HP), Pellet press 75 kW: 800 kg/h Overhauled by the Nova Pellet factory - main bearing for DIE replaced - cost: €13,000 Cgelqvsvg A Huoignot Original electrical cabinet, Siemens PLC control Additional spare parts: Die and rollers

Condition: new, Metallkraft MSBM 2020-30 PRO Motorized folding machine 3779121 Description: - Powerful and quiet drive via LENZE geared motors with brake - Compact, heavy and stress-free welded steel construction - Sharp bending rail made of C50 tool steel on the clamping beam - Continuous, replaceable bed support made of C50 tool steel - Continuous bending rail made of C50 tool steel on the bending beam - Automatic pressure regulation of the clamping beam via motor current pick-up - Clamping beam drive via generously dimensioned trapezoidal threaded spindles - PT 1 bending angle adjustment via potentiometer on the front of the machine (right) - Manually fine-adjustable bending beam with scale - Manual crowning via pressure screws in the folding beam - Foot remote control with emergency stop function - All moving parts mounted on low-maintenance bearings - Electrical components from Schneider or Omron - SH models with high, segmented goat foot tools - Quality Made in Europe Available on request: DUO models with continuous sharpening rail and segmented fence foot tools, standard hardened tools, hardened sharpening rail and bending bar, hardened segmented tools and bending bar, hardened segmented fence foot tools and bending bar Max. working width: 2020 mm Max. clearance between upper and lower beam: 200 mm Dimensions and weights: Length (product) approx.: 2935 mm Width/depth (product) approx.: 1100 mm Celqetw D Eqsvignsgt Height (product) approx.: 1560 mm Weight (net) approx.: 3050 kg Bending capacity: Bending capacity 400 N/mm²: 3.0 mm Bending capacity 700 N/mm²: 2.2 mm Explanation Bending capacity 700 N/mm²: Optional hardening of the tools is required for bending stainless steel Bending capacity aluminum: 3.6 mm Electrical data: Output power cheek: 0.75 kW Bending output: 3.0 kW

Condition: like new (used), Year of construction: 1999, Flexo printing machine for printing self-adhesive labels Nilpeter FA 2400 UV flexo machine - 6 colors The year of production - 1999. The machine is accompanied by printing cylinders: Z 93, 86, 96, 100, 102 + RUBBER TONING Magnetic cylinders Z 93,96,86,100,102 (correct) Colqef H Svajvignsgt Anilox rollers: 4 x 480 lines - 3.5 cm3 4 x 220 lines - 5.5, cm3 1 x 320 line - 3.5 cm3 60 ͦC

Condition: good (used), Year of construction: 2003, Functionality: fully functional, cooling capacity: 360 kW (489.46 HP), type of cooling: air, overall weight: 3,720 kg, total width: 2,220 mm, total length: 5,600 mm, total height: 2,000 mm, Aircooled chiller Climaveneta TC/SRAT/LN 360 kW Cooling capacity: 360 kW / 102,4 tons (12/7 — 35°C) Year of manufacture: 2003 Options: Low noise Heat exchanger: shell and tube Cgjlqviovbhhtegnjt Refrigerant circuit: 2 pcs. Type of refrigerant: R407C Number of fans: 6 pcs. Compressors: 2 pcs. Bitzer (screw) Dimensions: 5.60 x 2.22 x 2.00 m. Weight: 3720 kg. Working hours: 143/8741 h. Condition: Good

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm Cgolqvefdgi Hjignst width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: good (used), Year of construction: 2001, cooling capacity: 102 kW (138.68 HP), type of cooling: water, overall weight: 800 kg, total width: 970 mm, total length: 1,970 mm, total height: 1,300 mm, Chiller CLIMAVENETA 102 kW Cooling capacity: 102 kW / 29 tons (12/7 — 35°C) Refrigerant circuit: 2 pcs. Type of refrigerant: R404а Compressors: 2 pcs. Copeland Dimensions: 1.97 х 0.97 х 1.30 m Weight: 800 kg Country: Italy Condition: Good condition Cgslqviowduh Regnot Without condenser

Condition: new, Metallkraft BMBS 360 x 500 HA-DG Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. Description: -Semi-automatic swing frame metal band saw for miter cuts from +60° to -60° with frequency converter. -Designed for industrial use -For sawing e.g. stainless steel, tool steel, hollow sections and solid materials -Saw band drive with low-maintenance, oil-lubricated worm gear -With robust three-phase motor with overload protection -Saw band guide with adjustable carbide plates -With mechanical saw band tensioning and monitoring by microswitch -Cooling system on the saw band guides -With frequency converter as standard for infinitely variable adjustment of the saw band speed from 20 - 100 m/min. -With BRP saw band monitoring as standard Technical data: Motor power 2.0 kW Speed steps stepless saw band speeds 20 ? 100 m/min saw band dimensions 4780 x 34 x 1,1 mm Footprint (LxWxH) 2900 x 950 x 2270 mm Cslqvigscgz E Tonjgt Table height material feed 820 mm cutting angle 650 kg Cutting range 360 mm Cutting range 0° round tube material 250 mm Cutting range 0° round tube solid material 500 x 360 mm Cutting range 0° - rectangle lying 500 x 360 mm Cutting range 0° - rectangle standing 350 mm Cutting range +45° - round tube material 180 mm Cutting range +45° round tube solid material 400 x 180 mm Cutting range +45° - rectangle lying 350 x 360 mm Cutting range +45° - rectangle standing 310 mm Cutting range -60° - round tube material 130 mm Cutting range -60° round tube solid material 310 x 170 mm Cutting range -60° - rectangle lying 200 x 360 mm Cutting range -60° - rectangle standing 360 mm Cutting range -45° - round tube material 180 mm Cutting range -45° round tube solid material 400 x 190 mm Cutting range -45° - rectangle lying 330 x 360 mm Cutting range -45° - rectangle standing 270 mm Cutting range +60° - round tube material 130 mm Cutting range +60° round tube solid material 270 x 320 mm Cutting range +60° - rectangle lying 240 x 360 mm Cutting range bundle - round tube solid material 500 x 220 mm

Condition: good (used), Year of construction: 2020, cooling capacity: 53 kW (72.06 HP), type of cooling: air, overall weight: 580 kg, total width: 1,100 mm, total length: 2,400 mm, total height: 2,300 mm, AIRCOOLED CHILLER CLIVET WSAT-YES 18.2 53 KW Cooling capacity: 53 kW / 15,1 tons (12/7 — 35°C) Year of manufacture: 2020 Heat exchanger: Plate Type of refrigerant: R32 Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Mitsubishi Electric (twin rotary inverter) Number of fans: 2 pcs. Dimensions: 2.40 x 1.10 x 2.30 m Weight: 580 kg Colswdt N Teqvignjgt Working hours: 0 h Condition: Excellent Need to configure the control panel

Condition: new, BMBS 300 x 320 CNC-G Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Description -Fully automatic, CNC-controlled swing frame metal band saw for miter cuts up to +60°. Cgjlqscgz Suovignet -Hydraulically controlled system for both vices and the working steps of the saw arm -Ball bearing mounted turntable -Frequency converter as standard for stepless adjustment of -saw band speed from 20 - 100 m/min -BRP - Saw band monitoring -The jaws of the two vices are equipped with long-stroke hydraulic cylinders as standard, thus eliminating the need for presetting to the material cross-section to be sawn -Quality Made in Europe Technical data Electrical connection 3 x 400 V / 50 Hz Motor power 2,4 kW Speed levels 2 saw band speed 20 - 100 m/min Saw band dimensions 3660 x 27 x 0,9 mm dimensions (L x W/D x H) approx. 2240 x 2710 x 2050 mm Table height material feed 800 mm weight approx. 800 kg Residual workpiece length min. CNC operation 115+20 mm cutting range 0° round profile 300 mm cutting range 0° round full 180 mm Cutting range 0° square material lying 320 x 300 mm Cutting range -45° round profile 300 mm Cutting range -45° round full 110 mm Cutting range -45° square material lying 290 x 300 mm Cutting range -60° round profile 200 mm Cutting range -60° round full 80 mm Cutting range -60° square material lying 190 x 190 mm Cutting range bundle round profile 320 x 160 mm

Condition: new, Metallkraft RB 54 mandrelless tube bending machine NC-controlled, with large program memory. NC control for setting the bending angle. High quality, robust construction Up to 50 programs can be stored Fast tool change Purely motorized drive Automatically returns to starting position TECHNICAL DATA: Bending radius max. 125mm Bending angle max. 210 Bending speed(s) 2rpm Torque 2341Nm length (product) approx. 600mm width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending capacity tube material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 650 N/mm² (Ø x wall thickness) 42 x 3mm Power drive motor 1,1kW Supply voltage 400V Cgolsfdr Sajqvignst Mains frequency 50Hz Note: Substructure optionally available

Condition: new, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Horizontal and vertical working possibility Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works Cgjlqsdairtevignjt Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Condition: new, Metallkraft PM 10 M punching machine with automatic operation and 10 t pressing force DESCRIPTION: For precise punching and cutting work due to powerful eccentric mechanism Two working modes selectable: Automatic mode: the machine performs 30 cuts per minute, saving time when processing workpieces with several identical punch cuts. Manual mode: The machine makes one cut after pressing the foot switch. Illuminated work area - Storage for punching and cutting tools in the base frame Colqvijgplf Ssgnjgt - Recesses in the base for easy transport with forklift truck - Tools must be ordered separately depending on the application, not included in the scope of delivery Dimensions and weights: Length (product) approx. 680mm Height (product) approx. 1400mm width/depth (product) approx. 430mm Weight (net) approx. 250kg Electrical data Power drive motor 2,2kW Type of current AC Supply voltage 400V Mains frequency 50Hz Phase(s) 3Ph Punching station Punching pressure 10t OTHER MODELS PLEASE REQUEST

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Cjljkzk Hveqvignogt Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Cjlqvocf D Rboignogt Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION Coljkzk Exeqvignsgt - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS