Used Gesan Dvs 250 for sale (18,680)

Condition: used, Jasa 250FV More information soon Dslqzst Tr Rrovh Rokl

Year of construction: 2022, Condition: used, Year of construction: 2022 New: No Power: 250 kW (340 PS) Part suitable for: DAF Damage: none Delsuuqh Ssqzvh Rskl VAT/differential taxation: VAT deductible Type number: 2424EA13570037

Condition: excellent (used), Year of construction: 2013, Servodrive is in good condition Dolqsfkv Ecjzvh Rokl

Condition: ready for operation (used), Table length - 775 cm Continuous feed speed adjustment Maximum fence setting to the saw - 42 cm Fence manually adjustable Motor power - 15 kW Year of manufacture - 1985 380 V Dkelqzvovbdg Ssh Rel

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Delqogta Rcozvh Rskl Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Year of construction: 1995, Condition: good (used), BASTON CATERPILLAR WITH WINCH RR-4-250 Year of construction 1995 4 caterpillars - as new Start approach winch Dkolqzvhjl Dtcde Rel Operating hours: 12,374 h Condition: in very good condition

Condition: used, Year of construction: 2003, saw blade diameter 250 mm capacity 90 degrees: round 70 mm capacity 90 degrees: square 65 mm Dslqzvsvkiypsh Rokl turning speeds 52 / 104 U/min total power requirement kW weight of the machine ca. 0,13 t dimensions of the machine ca. 800 x 600 x 1500 m Manual cold circular saw with: - Mitre 45°/45° - Machine base

Condition: new, Functionality: fully functional, power: 17.7 kW (24.07 HP), fuel type: diesel, color: yellow, overall weight: 2,500 kg, maximum load weight: 1,000 kg, Year of construction: 2023, operating hours: 2 h, The Bull 250 Tele is a compact wheel loader with a robust front loader system and powered by a powerful Yanmar Stage V engine. Technical specifications: Dkjlqzvherci U Uj Rsl Engine: Yanmar 3TNV88 - Stage V Max. power output: 17.7 kW Dead weight: 2500 kg Travel speed: 20 km/h Max. lifting capacity: 1000 kg Max. lifting height: 3500 mm

Condition: used, Kuka Robot Jet Robot Dkjlqzvhevgwtco Rol Jet Axis KL 250

Year of construction: 2010, Condition: good (used), Here we offer a Vötsch VTU 60/60 drying oven. Vötsch VTU 60/60 drying oven Nominal temperature: 250°C Interior dimensions: width 600 mm height 600 mm depth 600 mm Outer dimensions: width 1000 mm height 1675 mm depth 1300 mm Supply voltage: 400 V 3 (N) PE AC, 50/60 Hz Dkelqon Hqg Dozvh Rsl Type: VTU 60/60

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! Dkjlqzjhqnl Tjvh Rsl advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: good (used), Functionality: fully functional, mileage: 664,415 km, power: 184 kW (250.17 HP), overall weight: 11,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, suspension: steel-air, loading space width: 2,500 mm, loading space length: 6,400 mm, loading space height: 2,600 mm, Year of construction: 2012, MAN TGM 12.250 CENTINA COVER COVER - YEAR 2012 - KM 664415 - CC 6871 - CV 271 - KW 184 - EURO 5 - INTERNAL LENGTH 6400 mm - WIDTH 2500 mm - HEIGHT 2600 mm - ABS - AIR CONDITIONING - ELECTRIC WINDOWS - ELECTRIC MIRRORS - FOG LIGHTS - CARD TACHOGRAPH - CD RADIO - ELECTRIC MIRRORS - ELECTRIC WINDOWS - REAR PNEUMATIC SUSPENSION - STEERING WHEEL CONTROLS - CAPACITY 5000 KG - FOR INFO DAVIDE 3355266031 Delqovty A Hszvh Rekl

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm Dkslqoupxpmjzvh Rjl connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 1,3 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.

Year of construction: 2002, Condition: excellent (used), Model: ES 750H330W/250 HL-2F Djlqzoiv Swxevh Rskl Year : -99

Condition: good (used), Vötsch Heraeus Djlqzvhju Hgi Rs Rskl NTU 100/150 Drying oven up to 250°C Drying oven Industrial oven Inside: Width 1 meter Height 1.50 meter Depth 1 meter

Condition: good (used), You can purchase one of 2 guillotine shears here Both model SMT 250 Cutting capacity 2mm iron Djlqzsvclc Rovh Rjkl Cutting length slightly over 2m Depth stop with length indicator in mm Price is per machine Matching bending / folding benches are optionally available - set price possible

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber Dolqzvhsd Ab Uus Rskl plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 125 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 0,75 kW Dolqzvoupxctjh Rjkl weight of the machine ca. 0,135 t dimensions of the machine ca. 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.

Condition: new, Rexroth Bosch Hydraulic pump A4VSO 250 HS4P /30R-PPB13NOO - SO 2 MNR: R902472279 FD: 08W15 Dkjlsgv In Toqzvh Rjl

Year of construction: 1981, Condition: used, plate thickness 4 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm Dkelqzsp U Utfevh Rjl total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: new, grinding wheel diameter 250 mm connected load frequency 230 V 90 - 180 U/min weight of the machine ca. 18 Kg Dkoloupxhcjqzvh Rol dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm

Condition: new, saw blade diameter 250 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 95x60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 65x60 mm total power requirement 1,0 kW weight of the machine ca. 0,075 t dimensions of the machine ca. 0,3 x0,8 x0,75 m SPECIAL PRICE!!! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR Djlqzvod Iipbjh Rjkl ATTENTION: Price is without saw blade!!! (saw blade price EUR 62,-EUR)

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min Delqzekxhqnjvh Rskl centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Dslqzvsfv Av Ioh Rokl Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min Dkjleff Efrsqzvh Rel dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion