Used Gesan Dvs 250 for sale (18,676)

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Sabi saw PBS 250A, automatic Sabi saw with CNC, new touch screen, with frequency converter for saw speed. Max diameter 250mm, rectangle 250 x 230mm, cutting speed 15 to 105m/min, main motor 2.2kw, total power 2.5kw, estimated weight 1250, with chip extractor, machine with all new carbides and new cylinder seals, year 2005 machine in very good condition Dkjb Hcw Ievv Nlpomol

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 Djbslzm Eqe Hcw Imjkl center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, power capacity 12/36/47 kW Djb Hcweu U Ug Rs Imokl volt 380 V ampere 32,7 / 65/ 86 A weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: IC903455, VDL HT-250 rotary valve. inlet Ø250mm outlet Ø250mm Dkob Hjuy S Ilocw Imsl At 100% filling 13 m3/H (7 liters per revolution) motor: 0.37 kw 31 rpm steel body stainless steel rotor with work switch

Condition: used, machine/vehicle number: 0703250005002, Machine designation shielding gas welder Stock-No. MA880 Manufacturer Kima TYPE Sicnat 250 LC Year of manufacture approx. 1980 Dkeb Hcweb I Rdaj Imel Size (L-W-H) 1000X480X800mm MA No. 0703250005002 Techn. data: 3 coarse levels , 6 fine levels,wire feed,380 volt,manometer, 60%E.D:250A 100%E.D.210A (Changes and errors in the technical data, specifications and prices and subject to prior sale).

Condition: used, Brand : AidaModel: NC2-25, Capacity 250mm, Stroke 280mm, Stroke per min 20-35, Slide to bolster 550mm, Slide adjustment 120mm, Slide area 2100 x 700mm, Bolster area 2700 x 920mm, Motor 30 kW, Single crank Dkjb Hcw Iep Dxwromel

Condition: excellent (used), Heraeus Heating cabinet Drying cabinet UT 6060 up to 250°C Dkob Hefi Tgpscw Imjl

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03609 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Dsbsux Shve Hcw Imskl Space requirement Ø x H: 420 x 390 mm Weight: 52 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: ready for operation (used), Condition Used Stock Number 412995 This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight Dksb Hevl Ax Iecw Imjl RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Condition: excellent (used), Year of construction: 1964, Compressor 250-250 Year of construction 1964 250 l boiler Dkeb Hjqnuk Njcw Imjl 250 l Suction capacity 10 bar Oil change done

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 32,514 h, load capacity: 2,500 kg, fork length: 2,350 mm, drive type: Lithium-Ionen, Low lift truck Load centre of gravity: 600 Condition: Reconditioned without guarantee Technical condition: good Dkob Hcwevt Hdke Imsl Battery voltage: 24V Battery Ah: 210Ah Description: Prices are subject to change, ex warehouse, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by arrangement. Our general terms and conditions apply. Solid side walls, small drawbar, PIN code, 12.5 km/h, servo-assisted steering, E-bar, PC/TC holder long arm, 12V socket, tandem Vulkollan fork rollers, Vulkollan drive wheel, single Vulkollan support wheel, medium battery compartment

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 81066, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 60 kg, table width: 254 mm, table length: 254 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Dkjb Hjvvktnscw Imsl Work surface: 254 x 254 mm Table holes: M14 x 8 pieces Table indexing (4th axis): 0.001° Max. pallet load: 60 kg Max. tool loading capacity: 350 x 400 mm Travel paths X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: 0.001° - 360,000° Distance table top edge - spindle center: 60 - 365 mm Distance table center line - spindle head: 60 - 390 mm Spindle Spindle cone: NST No. 30 Speed: 80 - 8,000 rpm Drive: 1-stage C.O.G. Belt drive (no V-belt/no slippage) Cooling: IKZ Feed Rapid traverse (X, Y, Z axis): 40,000 mm/min B-axis feed: 8,000°/min (22.2 rpm) Milling feed (X, Y, Z): 0 - 15,000 mm/min Delay at this rapid traverse: 0.012 s Tools Tool storage: 24 Tool changing method: direct control (fixed holder location-AI2VW) Tool holder: MAS BT30 Max. tool dimensions (d x l): Ø 50 x 200 mm Max. tool weight: 2 kg Tool changing time: 1.2 s Chip-to-chip time: 3.0 s Motor Spindle motor (30 min./continuous operation): AC 3.7/2.2 kW Motor for tool changer: AC 400 V Motor for cooling system: AC 1,210 W Lubrication: Grease lubrication Mains connection: 8 kVA MACHINE DETAILS Machine height: 2,284 mm Floor area: 1,650 x 2,850 mm Machine weight: 4,090 kg Operating hours: No recording possible, used since 1999 in a mix of one to three shift operation No extraction is supplied and the system is currently prepared for a minimum quantity lubrication AM4000 from Knoll.

Condition: used, Year of construction: 1979, pressure 250 t distance between columns 600 mm stroke - mm total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Dob Hcw Ijtqp Sljmekl Drive: ^22

Condition: used, ESAB type LTG 250 electric welder Stick electrode welder Machine No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: stepless - Electrode holder with 6 meter connection cable - Direct current - fan-air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug space requirement L x W x H 1200 x 750 x 1050 mm weight 180 kg Dkob Hcw Ied N E Rvemjl good condition Unit was originally designed also for TIG welding. The hose package for TIG welding is not present and the function has not been tested. The water cooling was for the hose package for TIG welding. The unit is therefore sold only as an electrode welder.

Condition: excellent (used), Year of construction: 2002, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 2,470 bar, injection weight: 97 g, ejector force: 400 N, plate width: 570 mm, overall weight: 3,180 kg, ARBURG Allrounder 80 T type 370C 800-250 in very good condition Closing force: 80 T Year: 04 / 2002 Screw diameter: 30 mm Max. injectable volume: 106 cm3 Injectable weight: 97 gr Injection pressure: 2470 bar Platen dimensions: 570 x 570 mm Distance between columns: 370 x 370 mm Minimum mold thickness: 250 mm Dsb Hcw Ieuylursmokl Machine weight: 3180 kg

Condition: good (used), Metal crosscut saw TL 250 With miter fence Dob Homfr Huocw Imskl Uind mobile stand

Condition: good (used), ALPA RVC - 250 Rotary table surface grinder -magnet diameter 300mm -Magnetic rotary table / two-stage -Height adjustment by hand -Grinding height approx. 130mm Grinding wheel pull-off device on the side -Coolant device -Machine housing -machine feet -Conversion of the electrics - New -Two spare grinding wheels -Operating tool Dimensions: LxWxH 1.2x1x1.8 meters /Weight 850Kg Dob Hcw Ieva Dzysmjkl Errors / input errors excepted

Condition: new, Year of construction: 2025, drop-through hole in table: 250 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 18.5 kW (25.15 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE Dsb Hcwsvtyy Sj Imjkl • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 250 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-190 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 100 RAM - TABLE DISTANCE (MM) 650 LOWER TABLE DIMENSIONS (MM) 900X1200 LOWER TABLE HOLE DIAMETER (MM) 250 RAM TABLE DIMENSIONS (MM) 450X780 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 18.5 WEIGHT (KG) 12000 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual Djb Hcjt Hxa Tsw Imjkl options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,088 h, Krauss Maffei 250-1400CX with robot and gas boost (224) Description General information Product Code: 224 Availability: In Stock Year of production: 2017 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Injection speed: 848 ccm/s Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Type of controls: MC6 Language: German Power: 77,5 kW Workinghours: 19.088 h Dkjb Hcouy Rpnjw Imol Weight: 19.300 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes

Condition: good (used), Year of construction: 2005, Technical data: max. machining diameter: 380mm max. swing diameter over slide: 675mm max. distance between the spindles: 541mm max. bar capacity: 77mm Traverse path X - Y - Z axis: 230 / 100 / 575mm rapid traverse X - Y - Z axis: 30 / 21 / 33mm Main spindle Speed: 4.000min-1 Motor (100% / 30 min.): 22 / 26kW Spindle bore: 88mm Counter spindle Speed: 6.000min-1 Motor (25% ED) 7.5 kW Travel: 585mm Tool turret with driven tools Number of positions: 12 Max. Speed: 4.500min-1 Motor: 5.5kW Tool shank height: 25mm Tool shank diameter: 40mm Machine weight: 5.400kg Footprint L x W x H: 285 x 187 x 187cm Accessories: Loading and unloading robot Mitsubishi RV-12SL-S12 Interface for bar loading magazine Dkjbeufkh Eo Hcw Imsl Automatic parts catcher Automatic door High pressure cooling 5 bar Chip conveyor

Condition: new, Functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Dsb Hcw Ievrylfsmekl Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW Dkjb Hcst Hw Aysw Imel weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Dkjbet Hwzps Hcw Imjl Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Djb Hcw Ist Hwupemjkl * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.