Used Gesan Dv 250 for sale (28,957)

Condition: excellent (used), Heraeus Deliefi Tgpspf I Hskl Heating cabinet Drying cabinet UT 6060 up to 250°C

Condition: used, Year of construction: 1979, pressure 250 t distance between columns 600 mm stroke - mm Dslipfstqp Sle I Hokl total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 32,514 h, load capacity: 2,500 kg, fork length: 2,350 mm, drive type: Lithium-Ionen, Low lift truck Load centre of gravity: 600 Condition: Reconditioned without guarantee Technical condition: good Battery voltage: 24V Dkslijvt Hdkjpf I Hel Battery Ah: 210Ah Description: Prices are subject to change, ex warehouse, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by arrangement. Our general terms and conditions apply. Solid side walls, small drawbar, PIN code, 12.5 km/h, servo-assisted steering, E-bar, PC/TC holder long arm, 12V socket, tandem Vulkollan fork rollers, Vulkollan drive wheel, single Vulkollan support wheel, medium battery compartment

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 81066, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 60 kg, table width: 254 mm, table length: 254 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Work surface: 254 x 254 mm Table holes: M14 x 8 pieces Table indexing (4th axis): 0.001° Max. pallet load: 60 kg Max. tool loading capacity: 350 x 400 mm Travel paths X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: 0.001° - 360,000° Distance table top edge - spindle center: 60 - 365 mm Distance table center line - spindle head: 60 - 390 mm Djlipovvktnef I Hekl Spindle Spindle cone: NST No. 30 Speed: 80 - 8,000 rpm Drive: 1-stage C.O.G. Belt drive (no V-belt/no slippage) Cooling: IKZ Feed Rapid traverse (X, Y, Z axis): 40,000 mm/min B-axis feed: 8,000°/min (22.2 rpm) Milling feed (X, Y, Z): 0 - 15,000 mm/min Delay at this rapid traverse: 0.012 s Tools Tool storage: 24 Tool changing method: direct control (fixed holder location-AI2VW) Tool holder: MAS BT30 Max. tool dimensions (d x l): Ø 50 x 200 mm Max. tool weight: 2 kg Tool changing time: 1.2 s Chip-to-chip time: 3.0 s Motor Spindle motor (30 min./continuous operation): AC 3.7/2.2 kW Motor for tool changer: AC 400 V Motor for cooling system: AC 1,210 W Lubrication: Grease lubrication Mains connection: 8 kVA MACHINE DETAILS Machine height: 2,284 mm Floor area: 1,650 x 2,850 mm Machine weight: 4,090 kg Operating hours: No recording possible, used since 1999 in a mix of one to three shift operation No extraction is supplied and the system is currently prepared for a minimum quantity lubrication AM4000 from Knoll.

Condition: excellent (used), Year of construction: 2002, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 2,470 bar, injection weight: 97 g, ejector force: 400 N, plate width: 570 mm, overall weight: 3,180 kg, ARBURG Allrounder 80 T type 370C 800-250 in very good condition Closing force: 80 T Year: 04 / 2002 Screw diameter: 30 mm Max. injectable volume: 106 cm3 Injectable weight: 97 gr Injection pressure: 2470 bar Platen dimensions: 570 x 570 mm Distance between columns: 370 x 370 mm Dkolsuylureipf I Hel Minimum mold thickness: 250 mm Machine weight: 3180 kg

Condition: good (used), ALPA RVC - 250 Rotary table surface grinder Dolipf Ieva Dzyj Hokl -magnet diameter 300mm -Magnetic rotary table / two-stage -Height adjustment by hand -Grinding height approx. 130mm Grinding wheel pull-off device on the side -Coolant device -Machine housing -machine feet -Conversion of the electrics - New -Two spare grinding wheels -Operating tool Dimensions: LxWxH 1.2x1x1.8 meters /Weight 850Kg Errors / input errors excepted

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Dkjlijt Hxa Tjpf I Hol Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,088 h, Krauss Maffei 250-1400CX with robot and gas boost (224) Description General information Product Code: 224 Availability: In Stock Year of production: 2017 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Injection speed: 848 ccm/s Tie bar distance: 630x630 mm Dkelsuy Rpnsipf I Hol Platen size: 1135x1180 mm Mould height min.: 330 mm Type of controls: MC6 Language: German Power: 77,5 kW Workinghours: 19.088 h Weight: 19.300 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes

Condition: good (used), Year of construction: 2005, Technical data: max. machining diameter: 380mm max. swing diameter over slide: 675mm max. distance between the spindles: 541mm max. bar capacity: 77mm Traverse path X - Y - Z axis: 230 / 100 / 575mm rapid traverse X - Y - Z axis: 30 / 21 / 33mm Main spindle Speed: 4.000min-1 Motor (100% / 30 min.): 22 / 26kW Spindle bore: 88mm Counter spindle Speed: 6.000min-1 Motor (25% ED) 7.5 kW Travel: 585mm Tool turret with driven tools Number of positions: 12 Max. Speed: 4.500min-1 Motor: 5.5kW Tool shank height: 25mm Tool shank diameter: 40mm Machine weight: 5.400kg Footprint L x W x H: 285 x 187 x 187cm Dkolipjufkh Eef I Hjl Accessories: Loading and unloading robot Mitsubishi RV-12SL-S12 Interface for bar loading magazine Automatic parts catcher Automatic door High pressure cooling 5 bar Chip conveyor

Condition: new, Year of construction: 2025, drop-through hole in table: 250 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 18.5 kW (25.15 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 250 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-190 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 100 Dkslipfjvtyy Ss I Hsl RAM - TABLE DISTANCE (MM) 650 LOWER TABLE DIMENSIONS (MM) 900X1200 LOWER TABLE HOLE DIAMETER (MM) 250 RAM TABLE DIMENSIONS (MM) 450X780 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 18.5 WEIGHT (KG) 12000 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: new, Functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Dkjlipsvrylfof I Hol Weight: 35 kg

Condition: good (used), Year of construction: 2007, 2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 - second-hand - : Price per unit ex location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of construction: 2007 Q400.00m3/h H 14.00m n 1460 1/min Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Delipfsuntlmj I Hekl

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Dkelipst Hw Ayjf I Hjl Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Year of construction: 2020, Condition: used, Year of manufacture: 2020 Field of application: Agriculture Make of bodywork: Pennaccnio Pompe 250 - 500 General condition: good Technical condition: good Throughput capacity: 500 m3/h Dslipfevmiu Ej I Hjkl Max dirt passage: 250 mm Max. head: 500 MWK

Condition: good (used), Functionality: fully functional, 1 x Jean Wirtz double polishing machine TF 250 robust, reliable polishing machine + plenty of wet sandpaper two speed settings 150 rpm and 300 rpm 2 turntables for sandpaper with 250mm diameter Dkelipfeurwavj I Hjl with connection for water or suspensions Adapter for sample holder 380V version 5 x silicon carbide wet abrasive paper HERMES approx. 100 pcs / pack Very adaptable, highly flexible and waterproof latex paper backing High tear resistance Can be used universally: wet and dry Applications Metallography:Sample surface preparation Paint processing:Paint and filler sanding in the automotive industry and vehicle construction Lacquered wooden parts:Fine lacquer sanding in the furniture and musical instrument industry Product structure Type:WS flex 18 C Abrasive grain:Silicon carbide Bond:Synthetic resin Backing:C-paper, waterproof Spreading:closed Körnung:P220/280/320/400/600

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V Dolijvn U Efspf I Hokl total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 530 mm turning diameter over slide rest: 320 mm turning length: 2000 mm center height over bed: 275 mm speeds: 18 - 1600 U/min spindle bore: 60 mm bed width: 430 mm engine output: 17 kW weight: 2700 kg spindle taper: 7 dimensions of the machine ca.: 5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets * Djlipfeqgi Rrj I Hskl

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) Dkoliegt E Ilepf I Hsl - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Dksljt Hwzpoipf I Hsl Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: reconditioned (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 9972309879, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,450 rpm, Completely refurbished pumps from the manufacturer KSB: Type: ETACHROM BCF 80-250/754 Power: 7.5 KW and 5.5 KW Upgrade: Individual parts painted for improved corrosion protection, use of e-SIC GLRDs from the manufacturer Eagle Burgmann; replacement of all fastening screws with stainless steel screws; motor housing sealing with shaft seals; 2 pieces of each are currently available. Dkolipfsuntwij I Hol All pumps have already been completely refurbished and are ready for shipping

Condition: new, Cytiva UNIPLATE V Bottom Microplate, 96-well, 250 µL, white polystyrene with V bottom (25 pcs) 7701-3250 Dkjlipfjvxu Tkj I Hel 1 box 50 pcs, 45 pcs unopened, 5 pcs opened

Condition: good (used), Year of construction: 2012, machine/vehicle number: 103345, - Control Siemens Sinumerik - Chip conveyor Knoll Frequency: 50 Hz Dkolehur Skoipf I Hel Operating voltage: 400 V Connected load: 43 KW Rated current: 78 A

Condition: excellent (used), Functionality: fully functional, wheel width: 500 mm, feed length X-axis: 5,000 mm, gear diameter: 500 mm, milling length: 5,000 mm, THREAD MILLING MACHINE Make: WMW HECKERT Model: ZFWVG 250X5000 – LATEST MODEL !! Thead and worm Milling length: 5000 mm Other Info: Machine complete in all its parts and accessories (change gears and more) Dkjliovdnmbjpf I Hel

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Dsliop Dt Uuepf I Hskl Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: used, Year of construction: 1965, honing diameter 80 mm Dkjlipf Ist Hwupj Hol stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.