Used Gesan Dv 250 for sale (28,937)

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Dkjbeixm Rkju U Ddmol Furnishing: - various replacement rollers - hand crank - front stop

Condition: used, Year of construction: 2001, operating hours: 78,000 h, Functionality: fully functional, clamping force: 250 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 250-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2001 Operating hours: 78,000 h Screw Ø: 18 mm Clamping force: 250 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Debu Uou Hqhqo Ddmekl Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: not inspected (used), Year of construction: 2002, center height: 250 mm, turning length: 1,500 mm, Compass 250 x 1500 Djbu Uovt Nxko Ddmokl Year 2002 Not tested so I don't know the condition. Can be loaded onto a truck. Can be delivered at an additional cost.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, A used Delta ice water cooling unit DKS 250 EF (year of manufacture 2019) is for sale. The appliance is fully functional and in very good condition. - Capacity approx. 200 liters/hour. Cooling water - Cooling approx. 13 - 15 °C below inlet temperature - Temperature: 0.5 - 2°C - 220-240 V, 50 Hz - Net capacity of the tank: 90 liters - works without pressure pump, can be combined with any water mixing and dosing device. - Stainless steel design - Can be mounted on the wall or in the adjoining room Price on request. Dkobu U Ddjvgalhemsl

Condition: used, Dryer / refrigerant dryer for compressor Dkjbu U Dspiq Dmedmol Data: see photo from nameplate Inspection is possible by arrangement !

Condition: used, turning diameter 500 mm centre distance 3000 mm Dkjbskxhrlsu U Ddmol Siemens control Sinumerik

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Djbeix Az Heu U Ddmokl Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03613 Year of construction: approx. 2000 Cup diameter bottom: 250 mm Pot diameter top: 380 mm Inner pot height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibrating bowl with rubber coating - The conveyor was used to feed automotive fuses Dsbu U Ddjuqrahsmjkl Space requirement Ø x H: 420 x 390 mm Weight: 50 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, machine/vehicle number: 6386016, Year of construction: 2015, operating hours: 8,327 h, load capacity: 2,500 kg, construction height: 1,290 mm, fork length: 1,590 mm, engine type: elektrisch, drive type: Elektro, net weight: 992 kg, Low lift order picker Chassis number: 6386016 Technical condition: good Battery Volt: 24V Battery Ah: 375Ah Dkobu U Deuhwudjdmel Battery year of construction: 2015 Description: BT LPE 250 M0517 Year of construction: 2015 Operating hours: 8327 The device is in visually very good and technically in very good condition. Charger on request. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site.

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Dobu U Ddsvl Skaemokl Working hours: 7397 h

Condition: good (used), Year of construction: 2003, Control unit: Mazatrol Fusion 640-T Diameter over bed: 525 mm Turning diameter: 300 mm Travel X/Z: 180 / 575 mm C-axis: 0.001° Y-axis: +-50 mm Main spindle power: 18.5 KW Main spindle speed: 4000 rpm Rapid traverse: 18 m/min Dsbu U Ddjtncfzemjkl Driven tools: 3.7 KW, 4500 rpm Machine weight: approx. 6000 kg

Year of construction: 2001, Condition: used, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW Debu U Dderc Ip Semokl rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Year of construction: 2018, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Dkobu U Ddopy Dxromol Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, Welding fume extraction, soldering fume extraction, laboratory fume extraction High Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D Serial. No. 2902619 Year of construction 2004 Device air volume flow max. 250 m3/h Minimum air flow rate min. 100 m3/h Separation efficiency 99,97 % Welding smoke class W3 Motor power approx. 0.75 kW Mains connection 230 Volt, 50 Hz - Suction power infinitely variable - 2 suction connections Ø 45 mm Djbu Usd Rxnme Ddmekl - mechanical air filter (used) - mobile base frame with 4 fixed castors, platform roller space requirement L x W x H 700 x 500 x 600 mm weight suction 35 kg weight platform roller 7 kg good condition

Condition: used, Year of construction: 1970, pressure 250 t stroke 20-140 mm no. of strokes 10- 60 Hub/min hole in the table 300 x 300 mm table-size 1050 x 820 mm ram adjustment 0-100 mm number of connecting rods 1 Stück table surface area 800 x 800 mm dimension of ram 690 x 700 mm total power requirement 26 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 2 x 4 m Dobu U Det Tqiyodmekl Complete line with decoiler, leveller and grip infeeder for 150 mm x 1-3 mm material. Machine has a PIV drive.

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min Djbust Hytbe U Ddmokl saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the Djbu U Ddjuriwgemokl D-A-CH and Be-Ne-Lux countries. We ask for your understanding

Condition: used, engine: 2,2 kW Dsbsr Er Ruju U Ddmskl Air volume: 2,700 m³/h Entrance ø: 250 mm Output ø: 250 mm Schröter MM 250/6R fan for extracting/transporting wood chips, wood dust or other shavings.

Condition: ready for operation (used), Technical characteristics Vertical head travel : 150 mm Max. solid part height : 180 mm Max. mortise length : 260 mm Head transverse travel : 70 mm Min/max door height : 740 to 1030 mm Work table dimensions : 470 x 140 mm Table inclination : from -45° to +45°. Door support Automatic chain lubrication pump Dkobu U Ddet Dga Aomjl Manual vertical travel Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2,2 Kw Motor: 3 CV Overall dimensions Lenght: 840 mm Width: 780 mm Height: 1850 mm Weight: 340 Kg

Condition: used, Max. cutting length: 250 mm Dkobjt D R Nueu U Ddmsl Max. cutting thickness: 3 mm steel Knife in very good condition With attacks

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Year of manufacture 2003 Sprue picker Dkjbu U Ddohrw Amomol 2x PIECES

Condition: excellent (used), Year of construction: 2004, operating hours: 22,953 h, Functionality: fully functional, machine/vehicle number: 0680000211, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 5,000 rpm, New PCU in 2018! TECHNICAL DETAILS Speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Control: Siemens Sinumerik 840D, POWER LINE Travel paths X-axis: 650 mm Y-axis: ± 50 mm Z-axis: 300 mm Turret and tools Turret: 12 positions Tool holder: VDI 40 Tool speeds: 4,000 rpm Tool drive power: max. 11.7 kW MACHINE DETAILS Pallet conveyor: EWAB, loading station on the right Machine weight: approx. 8 t On-time hours: 34,982h Spindle hours: 22,953h EQUIPMENT Dkobjvvii Uju U Ddmjl - Measuring probe - Driven tools - C-axis - High-pressure pump with 20 bar, 500 l and double changeover filter - Immersion cooler for coolant - Electrostatic suction of LTA - Collecting tray under the machine - Kitagawa 3-jaw chuck B210 - EWAB pallet conveyor with loading station on the right - Chip conveyor

Year of construction: 2005, Condition: like new (used), Gallus TCS 250 Label Printing Machine Dksbujvw R Eao U Ddmsl Year of Manufacture: 2013 _____ Machine Specifications and Equipment:  Unwinding with web control, cleaning and corona unit  1 screen printing unit (semi-rotary)  5 offset printing units (semi-rotary)  1 foil stamping unit (semi-rotary)  1 screen printing unit (semi-rotary)  1 relief embossing unit (flat)  1 punch (flat)  Matrix take-off and 2 rewinders The machine was put into operation in 2005 and the relief embossing unit was added in 2008. The machine was completely overhauled in 2017. As part of this, the control system was also replaced and upgraded to the latest version 3. It is currently still in full operation and in good condition. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment)

Year of construction: 2008, Condition: good (used), Grist dust removal + 2 comp. Grav. dosing unit MB Engineering T 250, year: 2008, price: 6.800 €, contact: Mr. Rainer Eckerle Dkjbujd S S Rzo U Ddmel

Year of construction: 2007, Condition: new, Cylinder: 0351-563-00-00 For Angel 250 TO Dobed A Nraeu U Ddmskl Cylinder completely new BJ ca2007