Used Cormach 12000 E4 for sale (2,229)

Condition: new, Functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Croljvnuq Ioqup Eieb Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT Crolqupsrp It To Eijb - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Cslqup Esd Hx Uqoiorb

Condition: used, mileage: 14,588 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, empty load weight: 2,301 kg, maximum load weight: 799 kg, first registration: 06/2024, emission class: euro6, color: black, suspension: other, number of seats: 6, total length: 4,895 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, immobilizer system, navigation system, onboard computer, soot filter, trailer coupling, Interior paneling, 2 sliding door(s), disc brakes, touchscreen, lumbar support, clock & tachometer, brake pad indicator, heat-insulating glass, metallic, 5-door, manufacturer's warranty, 1st hand, green environmental sticker (4), breakdown kit, Apple CarPlay, Android Auto, tinted windows (privacy glass), anti-glare high beam, summer tires, reversing camera, black, passenger airbag, window/head airbags front, sliding door right, sliding door left, color monitor for navigation system, shift paddles, parking sensors front, parking sensors rear, parking sensor camera, electric windows, heated seats, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, automatically dimming interior mirror, power steering, electric exterior mirrors, brake assist, adaptive cruise control, comfort seats, removable tow bar, rear-wheel drive, 3rd brake light, center armrest, country version Germany, other equipment available, errors and prior sale excepted, trade-in Financing is possible, please contact us and we will create a tailor-made offer for you. B25Electric parking brake BA3Active Brake Assist BH1HOLD function BS1Brake calipers with Mercedes-Benz lettering C6Multifunction steering wheel C74Illuminated Mercedes-Benz entry lettering CF8Sports suspension CK8Heated steering wheel CL1Steering wheel with adjustable tilt and height CL3Leather steering wheel CUAerodynamics package D14Anodized roof rails E07Hill start assist E1DDigital radio (DAB) E1ENavigation E1TTouchpad E4SSmartphone integration package E7HMBUX multimedia system High EL92-way speakers front and rear ES212 V socket in trunk / load compartment ES312 V sockets for rear seat rows right and left ET4Active Distance Assist DISTRONIC EY5Mercedes-Benz emergency call system EY6Breakdown management F1OCentre console with storage compartment + cup holder. F2W Winter package F3Z Comfort closing F48 Heated windscreen washer system F65 Exterior mirrors, automatically folding F66 Lockable glove compartment F69 Ext. Crslquewf Nfaop Eiob

Condition: excellent (used), - External dimensions: 2900 x 2425 x 2300 mm Crelqupevcx D Is Eiob - Cart: 2x 600 x 800 mm - NP:7367170 Lhoy Tdwevcx D Ish Sof - Energy: gas or oil - Voltage:400V - Heating power: 120000kcal - Power: 5kw Overhauled equipment: equipment is prepared when it is ordered. Pick-up and drop-off times are agreed at that time (please ask for the price after overhaul).

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086635 Model: A 124H Cslqujvrgacsp Eiorb Type: F4HE4CL06611010 Condition: Used

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand FANUC Colev H E Izsqup Eiorb Model OM PLUS NC Main Drive Spindle speed range 12000 Spindle motor power 18.5 kW / 11 kW Tools Slots in storage 30 Additional Equipment MPG Handle 3-Color Signal Tower (LED: Red-Yellow-Green) Chip Conveyor (Hinged Belt for Steel, Right Side, H-800mm with Torque Limiter) Renishaw OMP60 In-Machine Measuring System & OTS Cable-Free Tool Measuring System Optical Type Sensor for Spindle This 3-axis DN SOLUTIONS DNM 5700 vertical machining center was manufactured in 2023. Ideal for precision machining, this unit offers robust construction and advanced control features. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS DNM 5700 machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2022, Suction unit already used for demonstration purposes Year of construction 2022 not dust-tested For milling, planing and sawdust High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For milling, planing and sawdust (not suitable for dust) Extraction unit can be rotated through 180° to allow extraction from below or above Sturdy metal fan wheel High-quality chassis as standard for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Crslquokwhzhop Eijb Double-woven fine filter bag Scope of delivery: Two filter bags, two chip bags Nominal volume flow2800 m³/h Negative pressure max.1900 Pa Filter area2 x 1.92 m² Chip collection volume2 x 120 l Nominal width external suction nozzle inlet203 mm Nominal width external extraction connection outlet1 x 100, 2 x 120 mm Idle speed2950 min¯¹ PU1 Dimensions and weights Length approx.1500 mm Width/depth approx.500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Input power2.2 kW Supply voltage400 V Mains frequency50 Hz Noise emission Sound pressure level max.87.5 dB(A) Availability: short term Storage location: Hochheim

Condition: like new (used), Year of construction: 2013, operating hours: 12,857 h, Functionality: fully functional, machine/vehicle number: 245345, THIS MACHINE COMES WITH 12 MONTHS WARRANTY Mazak VCS 530C Great one owner machine with no faults at all 2013 machine 12000rpm spindle with thru coolant 30 tool magazine swarf conveyor Csleqwk Hgoqup Eijrb Mazak Tool length measuring Renishaw probe preparation coolant mist extraction This Machine can be seen running under full power in Redditch just south of Birmingham

Condition: used, mileage: 13,131 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, empty load weight: 2,301 kg, maximum load weight: 799 kg, first registration: 07/2024, emission class: euro6, color: grey, suspension: other, number of seats: 8, total length: 4,895 mm, fuel: diesel, Equipment: air conditioning, airbag, car registration, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, trailer coupling, Interior paneling, 2 sliding door(s), disc brakes, touchscreen, lumbar support, clock & tachometer, brake pad indicator, heat-insulating glass, metallic, 5-door, manufacturer's warranty, 1st hand, green environmental sticker (4), breakdown kit, Apple CarPlay, Android Auto, tinted windows (privacy glass), anti-glare high beam, summer tires, reversing camera, black, passenger airbag, window/head airbags front, sliding door right, sliding door left, color monitor for navigation system, shift paddles, parking sensors front, parking sensors rear, parking sensor camera, electric windows, heated seats, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, automatically dimming interior mirror, power steering, electric exterior mirrors, brake assist, adaptive cruise control, comfort seats, removable tow bar, rear-wheel drive, 3rd brake light, center armrest, country version Germany, other equipment available, errors and prior sale excepted, trade-in Financing is possible, please contact us and we will create a tailor-made offer for you. B25Electric parking brake BA3Active Brake Assist BH1HOLD function BSBrake calipers with Mercedes-Benz lettering C6LMultifunction steering wheel C74Illuminated Mercedes-Benz entry lettering CF8Sports suspension CK8Heated steering wheel CL1Steering wheel adjustable in tilt and height CL3Leather steering wheel CUAerodynamics package D1Anodized roof rails E0Hill start assist E1Digital radio (DAB) E1ENavigation E1Touchpad E4SSmartphone integration package E7HMBUX multimedia system High EI0Wireless charging system for mobile devices EL92-way speakers front and rear ES312V sockets for rear seat rows right and left ET4Active Distance Assist DISTRONIC EYMercedes-Benz emergency call system EY6Breakdown management F1OCentre console with storage compartment + cup holder. F2W Winter package F3Z Comfort closing F48 Heated windscreen washer system F65 Automatically folding exterior mirrors F66 Lockable glove compartment F69 Exterior Crslqupowf Icws Eiob

Condition: ready for operation (used), Year of construction: 1988, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, heidenhain 3-axis screwdriver feed drive Crslqupjtyngqo Eieb table 3500X700MM strokes 3100X1000X1000MM weight 12000KGS spindle 2000 turns sa 50 15KW

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086636 Colquot Iggwsp Eierb Model: A 124H Type: F4HE4CL06611010 Condition: Used

Condition: used, Year of construction: 2017, Serial number: SKBE45SH33KE2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 14968 Specifications: - 3 axle - Extension: 3.5 metres - Length: 12.75 metres - Forced steering on 3 axles - remote control that can be programmed - Tires (see pictures) - Tool cabinet - Ready for delivery Description: Kel-berg straight semi in good condition. Comes with a new remote control that must be programmed. Ready for delivery. Technical approved: no Celqupev U Szdj Eijrb EU-approved until: 14.04.2025 Own weight: 10150 Total Weight: 45000 Payload: 34850 Width: 255 Length: 1275

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Cjlqupou Druyo Eiorb Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindle guides

Condition: excellent (used), Year of construction: 2007, Mazak Vertical Centre Nexus 510C-II Year of Manufacturer: 2007 Mazatrol Matrix Nexus controller Swarf Conveyor Selection of tooling x10 Renishaw Probe 4th Axix prepped Crelqup Eovyhndjijb BT40 tooling 30 station magazine 12000 rpm main spindle full set of manuals axis clamps tool length measuring system EIA/Mazatrol programming This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 800 mm, Complete with all components required for installation/commissioning. x = 7000 y = 1600 z = 800 / w = 600mm. General overhaul in 2007, production year 1991. Rapid traverse 12000 mm/min / w axis 6000 mm/min. New Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, new control cabinets. The ECOCUT 1 was only switched on for a few hours. TDV 2 rotary table: max. workpiece weight 6t / clamping area 1000x1000. TDV 3 rotary table: max. workpiece weight 12t / clamping area 1250x1600. Accessories: 2 angle milling heads / chain tool changing system / plate field / complete housing / Knoll hopper feeder / extraction system / coolant system with belt filter. Complete with all BWF fixtures for installing the machine bed and clamping plate. ENGLISH: Complete with all components required for installation/commissioning. x = 7000 y = 1600 z = 800 / w = 600mm. General overhaul 2007, production year 1991. Rapid traverse 12000 mm/min / w axis 6000 mm/min. Crslqup Eswgk E Rsijb New Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, new control cabinets. ECOCUT 1 was only switched on for a few hours afterward. TDV 2 rotary table, max. workpiece weight 6t / clamping area 1000x1000 TDV 3 rotary table, max. workpiece weight 12t / clamping area 1250x1600 Accessories: 2 angle milling heads / chain tool change system / platen / complete housing / Knoll hopper feeder / extraction / coolant system with belt filter. Includes all BWF fixtures for installing the machine bed and clamping plate.

Condition: used, Used Filling Line for CSD 12000 bph Line configuration for isobaric filling of carbonated soft drinks The Used Filling Line for CSD 12000 bph fills PET bottles with carbonated soft drinks using isobaric technology. Since the isobaric process maintains pressure during filling, it preserves CO₂ saturation effectively. The system reaches a nominal output of 12,000 bottles per hour for 1.5-liter formats. Furthermore, it uses PCO 28 mm caps and operates on the Euro pallet packaging standard. Overall, the configuration is ideal for medium- to high-output CSD production. High-pressure air supply for the blowing process in the Used Filling Line for CSD 12000 bph  A high-pressure compressor, manufactured by SIAD (model MS3/1442-A3, year 2000), supplies compressed air to the blow molding machine. Specifically, it includes an air dryer and a 2000-liter air receiver to stabilize airflow. As a result, the compressor ensures consistent bottle formation. In addition, the unit supports continuous operation under high load, which is essential for large-scale PET blowing systems. Therefore, this component remains critical to upstream efficiency. Blow molding machine for PET preforms with mold cooling system Cjlquswcz Alsp Eijrb The line includes a Sidel SBO 10 Series 2 blow molding machine (1999), which transforms PET preforms into bottles. Although molds are not included, the machine features a box tipper, a preform feeder, and a SOGEQUIP water cooling system for the molds. Consequently, the setup supports high-speed bottle production. Moreover, the system enables uninterrupted feeding toward the filling block, thereby minimizing downtime. Notably, the machine’s robust construction guarantees long-term reliability. Rinser–filler–capper block with 60 valves and isobaric technology SIDEL Alsim manufactured the central filler block in 2000. It integrates 60 rinsing heads, 60 isobaric filling valves, and a 10-head Alcoa capper. Thanks to this configuration, the system achieves high throughput while maintaining pressure consistency. In particular, the isobaric filler limits CO₂ loss and reduces foaming, which is crucial for CSD bottling. Additionally, it allows quick format changes, making the line adaptable to different production needs. Automated high-capacity mixing system in the Used Filling Line for CSD 12000 bph  The Moravek 240C mixer, installed in 2000, prepares and carbonates the beverage at a flow rate of 24,000 liters per hour. It combines syrup, treated water, and CO₂ in controlled ratios. Importantly, the mixer ensures product consistency before entering the filler. In turn, this reduces process variability. Similarly, its high capacity aligns perfectly with the filler’s speed, avoiding bottlenecks and enhancing line balance. Automated labeling and packaging system The post-filling section consists of a Krones Contiroll labeling machine (2004), which applies wrap-around OPP labels.

Condition: used, 48EAE41AM3, Cleco, angle screwdriver Crjlqjvrhn Ujup Eijb Model: 48EAE41AM3 Condition: Used

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Work spindle throat: 800 mm Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm Crolqowc Sm Ijup Eieb

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Cjlqup Eowb Ehcoisrb Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: good (used), Functionality: fully functional, mileage: 872,848 km, power: 485 kW (659.42 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 15,070 kg, operation weight: 32,000 kg, maximum load weight: 16,930 kg, tire size: 385/65R22,5, axle configuration: 8x4, number of seats: 2, first registration: 02/2007, next inspection (TÜV): 07/2025, emission class: euro4, brakes: retarder, suspension: steel-air, Year of construction: 2007, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, head guard, hydraulics, parking heater, retarder, soot filter, tilting carriage, trailer coupling, Model: VOLVO FH16-660-37 8X4 Mileage: 872.848 (original) Tipping hydraulics (PTO) Lift and Steering Axle Parking heater Aerials Radio/cassette/CD/MP3 Air conditioning 2x air-suspended seats with seat heating and fully adjustable 1x recliner Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Working lights Fog lights High beam Hazard light Storage box Aluminum fuel tank Emission class: Euro 4 Ad-Blue Retarder/intarder/engine brake Wheel formula: 8x4 Steering axle + lift axle Differential lock Wheelbase axle 1 and 2: 3,700 mm Wheelbase axle 2 and 3: 1,370 mm Wheelbase axle 3 and 4: 1,380 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle2 (rear): 315/80R22,5 Tire size axle3 (rear): 315/80R 22,5 Tire size axle4 (rear): 385/65R22,5 Leaf suspension / air suspension Wheel cover Unladen weight: 15,070 kg Payload/load: 16,930 kg Permissible total weight: 32,000 kg Total vehicle dimensions (length x height x width): 910cm x 255cm x 350cm Body dimensions outside or inside: (length x width x height): 590cm x 221cm x 114cm With new TüV and AU by arrangement for an extra charge! You can also contact us for more information and pictures via WhatsApp: WhatsApp, Telegram, Viber, Signal Trade-in possible! Also available on request! Price is net! We can transfer your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle for you worldwide! Export license plates on request! We support you with the export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs license plate production, if required A viewing and test drive is possible at any time, even at the weekend, by telephone arrangement! Disclaimer: Celqup Eowa Rd Heierb The buyer is obliged to independently check the condition, dimensions and equipment of the goods/vehicles. All information is without guarantee. Subject to alterations, prior sale and errors excepted.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 900 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing UDG40 (2.5º) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN 69871) Crjlqusugbqasp Eieb Speed range: 20 - 3000 rpm Spindle power: 22 kW Feedrates Rapid feedrate (X / Y-Z): 20000 mm/min   /   12000 mm/min Weight and dimensions Maximum weight on table: 4000 kg Machine weight approx.: 14500 kg Machine dimensions approx.: 7367 x 5070 x 2803 mm Accesories External coolant (Optional: high p. through spindle) Electronic handwheel: HR-410 Guarding Sales conditions Warranty: 6 months mechanical parts Sale price (Ex Work): On request View all technical features

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Crjlqevymfuoup Eisb Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindles

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Basic machine 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable workpiece support, distance 600 mm - Jointing milling unit FG201 with 2 milling heads for joining the panel edge - Milling cutter, diamond D = 70x64x30 mm, Z2, anti-clockwise rotation for joining unit - Milling cutter, diamond D = 70x64x30 mm, Z2, clockwise rotation for joining unit - Edge feeder 1903 automatic transport of rolls and strips - Glue application system Glu Jet GJ301 (2.3 kW, 50 Hz) - automatic. Glue height adjustment (tactile nozzle) - Pressure unit 1912-3 pneumatic - Trimming unit 1918 (60 mm) pneumatic chamfer trimming 0/10 degrees, pneumatic adjustment - Milling unit FR201 (2x0.6 kW. 300 Hz, 18000 min-1) - Multifunctional milling unit flush, radius and radius outlet - Diamond milling cutter D=57x17 mm, Z2, R=2.0 mm, anti-clockwise rotation - Diamond milling cutter D=57x17 mm, Z2, R=2.0 mm, clockwise rotation - Corner copying unit 1832 (1x0.35 kW, 200 Hz, 12000 min-1) Crolqup Eevymhcjijb - Milling cutter, diamond D=53x10x16 mm, Z3, R=2.0 mm, with CM technology - Scraper unit 1929 with 2 Scraper holders, including reversible plates - Chip collection box for scraper unit 1929 - HW reversible plates for scraper holders - Surface scraper 1964 for removing the adhesive residue for a clean adhesive joint Location: Hochheim Availability: by arrangement

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Cjlqup Eowb Eg Sjierb Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis