Used Barford Sxr 7000 for sale (1,260)

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Cgelq R Nhednxyds Uot Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: ready for operation (used), Belt Conveyor Böhringer Brand: Böhringer *Br1: A-A length = 7000 mm, Beltwidth: 900 mm, Driving: 5,5 kW Gearbox. *Br2: A-A length = 31000 mm, Beltwidth: 950 mm, Driving: 15 kW Gearbox(=sold) *Br3: A-A length = 28000 mm, Beltwidth: 650 mm, Driving: 5,5 kW Gearbox. Cjlq R Njt Rcl Ish Uegt

Condition: excellent (used), Functionality: fully functional, Year of construction: 2008, operating hours: 9,166 h, Type: Sideloader Drive type: Diesel Load capacity: 7000 kg Cgjlsu Ic Skjq R Nh Uot Length: 5000 mm Overall width: 2250 mm Overall height: 3900 mm Dead weight: 11800 kg Mast type: Telescopic Lifting height: 5500 mm Free lift: 700 mm Fork length: 1400 mm

Condition: used, overall weight: 1,000 kg, fuel type: electric, operation weight: 1,000 kg, empty load weight: 1,000 kg, tire size: 155R13C, Year of construction: 2020, total length: 358 mm, tire condition: 60 %, front tire size: 155R13C | 60%, rear tire size: 155R13C | 60%, maximum speed: 50 km/h, working width: 130 mm, Tires (front): 155R13C, Tires (rear): 155R13C, First registered: 01.04.2020, Swing side walls_____We are selling 1 used Goupil G 4 from year of manufacture 2020 with approx. 11,000 kilometers with the following equipment: Lithium battery with 13.8 KW, range tested in practice approx. 100 kilometers.24-7016 Trailer coupling (ball head and jaw coupling) 24-7000 Doors with central locking 24-7002 Driving signal forward and backward 24-7003.1 Side tool box on the left in the direction of travel 24-7005 Radio with MP3, Bluetooth and hands-free system24-7006 Diesel heating 24-7011 LED rotating warning light incl. pre-installation 24-6061 Tipper, with 3 foldable Aluminum side walls 24-7039 recessed lashing eyes for flatbed Stedele grid construction Heavy DutyFurther details are available on request.,Storage location:94491 Hengersberg Cjleqx Tydeq R Nh Usgt

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000 x 1700 x 2700weight approx.: 14.000 Celq R Nhotvhxmj Ujgt

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, laser power: 7,000 W, laser hours: 22,600 h, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, total length: 111,000 mm, total height: 26,000 mm, total width: 46,000 mm, workpiece weight (max.): 900 kg, overall weight: 12,000 kg, space requirement width: 4,600 mm, space requirement length: 11,100 mm, space requirement height: 2,600 mm, feed rate X-axis: 200 m/min, Special equipment: + 5000 to TruFlow 7000 30mm stainless steel ! Standard equipment: - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow - maintenance-free turbo radial blower - Lens cutting head with 250mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition check - ControlLine: Height control and sheet edge detection Cslqjivaubo R Nh Uogt - SINUMERIK 840D - Automatic switch-off - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Complete operating instructions - Lens cleaning case - Transport locks - Crosshairs/ measuring bridge The machine is currently being overhauled in our factory in Lübeck. Once the work has been completed, the machine can be inspected under production conditions. Optionally with installation, commissioning and training of up to 3 operators at the buyer's premises for an additional charge, transportation and travel costs.

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Cgolqjdd Dzue R Nh Uet Weight - 820 Kg (EXW Jonava, Lithuania)

Condition: used, mileage: 565,000 km, power: 375 kW (509.86 HP), first registration: 12/2015, overall weight: 26,000 kg, fuel type: diesel, color: other, axle configuration: 3 axles, empty load weight: 11,500 kg, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, differential lock, hydraulics, onboard computer, trailer coupling, , Manufacturer: Volvo - Type/Model: FM 500 6x2 - First registration: 22.12.2015 - Mileage: 565.000 km - Number of axles: 3 - Emission class: Euro5 - Transmission: Automatic - Suspension: Air - Lift axle - Brake: Disc - Air conditioning - Length: 9050 mm - Width: 2550 mm - Height: 3300 mm - Unladen weight: 11500 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 17000 L - Tank chambers: 3 - System designation: Schwarte Jumbo Max - Impeller pump - Ultrakust MAK 3002 - Data transmission - CIP cleaning Cslq R Nerx T Ntoh Uogt

Condition: used, mileage: 23,473 km, power: 74 kW (100.61 HP), first registration: 01/1955, fuel type: diesel, color: red, driver cabin: other, gearing type: mechanical, Year of construction: 1954, total length: 2,300 mm, total width: 2,950 mm, number of seats: 6, Vehicle location: Bovenden, Color: red Imitation leather: red German car, classic car with H-approval German vehicle documents and Classic Data short evaluation 2019 (with condition 2- description) are available. Former fire engine, built in 1954 Unladen weight 7000kg L 8.0m x W 2.3m x H 2.95m 6-cylinder diesel engine Top speed: 85 km/h Cgslq R Nevhk Ucoh Ujt Equipped with various emergency equipment and devices: Blue emergency lights, radio + telephone and large ladder. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), mileage: 210,677 km, power: 346 kW (470.43 HP), first registration: 12/2019, fuel type: diesel, color: white, axle configuration: 8x4, tire size: 315/80R22,5, fuel: diesel, wheelbase: 4,300 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space width: 2,380 mm, loading space length: 5,600 mm, loading space height: 980 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, = Other options and accessories = - Digital tachograph - Tachograph (control unit) - Short cab - Power take-off - Pump = Remarks = Number of axles: 4, Configuration: 8x4, Own weight: 13781 kg, Gross weight: 37000 kg, Total tank capacity: 400 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 2, Suspension type: Leaf spring suspension, Cabin type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: White, Engine manufacturer: M.A.N., Engine type: D2676LF79 EURO6D, Engine power: 346 kW (464 Hp), Euro: 6, Gearbox type: AS-Tronic, Gearbox type: ZF, Gearbox type: TIP MATIC 12 28 OD, Gears: 12, Power steering, ABS, ASR, auxiliary drive, number of sides: 3 sides, drum volume: 13, drum volume in: m3, pump = More information = Drivetrain Engine type: MAN D2676LF79 EURO6D Gearbox Gearbox: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Suspension: leaf spring Axle 1: steered; tire profile left: 3 mm; tire profile right: 5 mm; brakes: disc brakes Axle 2: steered; tire profile left: 1 mm; tire profile right: 1 mm; brakes: disc brakes Axle 3: twin tires; tire profile left inside: 7 mm; tire profile left outside: 7 mm; tire profile right inside: 8 mm; tire profile right outside: 8 mm; brakes: drum brakes Axle 4: twin tires; Tire profile left inside: 1 mm; Tire profile left outside: 1 mm; Tire profile right inside: 6 mm; Tire profile right outside: 1 mm; Brakes: drum brakes Dimensions Dimensions (L x W x H): 866 x 255 x 324 cm Weights Empty weight: 13,781 kg Payload: 23,219 kg GVW: 37,000 kg Functional Loading area height: 156 cm Pump: Yes Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our offer includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package. Cgelq R Nhjuxzf Do Ust

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000x1700x2700weight approx.: 14.000motor: 15COVERS DAMAGED DURING TRANSPORT. Standard equipment: ----- CNC axes Y1, Y2, X and R axis CNC crowning device motorized with CNC control CNC control original DELEM DA 58 T touchscreen 15 inches Back gauge with linear guide and ball screw Sheet metal support arms on linear guides Laser protection device on the upper beam Cslotq Nm Nsq R Nh Usgt quick upper tool clamping Tool system Upper tool Promecam Amada split offset Mulit V matrix system both Promecam Amada CE protective equipment various options available                                                                                                                           KK Industries GmbH  There's something for everyone!

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2022, total width: 2,480 mm, total height: 3,998 mm, Equipment: ABS, Dimensions and weight Length: 13620 mm Width: 2480 Front wall height: 2550 mm Front body height: 2900 mm Body height: 2950 mm Tire size: 435 / 50R19.5 Gross weight : 36000/39000 kg Payload: 29476 / 30000 kg Aggregate load: 24000/27000 kg Load securing: Certified according to EN 12642 XL Beverage certified Chassis Axle spacing 1310/1310 Side impact protection Underrun protection AXLE LIFT Start-up aid (liftable front axle, MEGA, actuation "3 times braking") AXLES ROTOS SCB drive system for 19.5? (sliding brakes) Hubodometer (middle right) SUSPENSION Air spring SCB BRAKING SYSTEM Two-line compressed air braking system with standard couplings Steel air tank EBS 2S / 2M with stability program EBS power supply via ISO 7638 + CAN Double diaphragm spring-loaded cylinder SUPPORT WINCH Support winch ?Jost? LIGHTING SYSTEM Lighting system 24v with double round lights and 1 rear fog light 2 sockets 7-pin. Continuous lamp holder: white low version LED side marker lights coupled with indicators 1 pair of LED lane keeping lights 2 pieces of LED reversing lights separately WHEELS AND TIRES Long-distance tires 6-fold 435/50r19.5 steel wheels ET 120 protective caps for steel nuts FENDERS Additional PAIR of straight plastic fenders between the axles. Anti-spray mud flaps with Schmitz logo OTHER CHASSIS EQUIPMENT 2 plastic tool boxes with lid holder, shelf and drawer Pallet stop straight on both sides of the outer frame 19mm high 2460mm internal dimension rubber impact protection at the rear 1 extendable ladder lashing eyes 5 pairs 2t and 11 pairs 4t according to EN 12640 pulling force per eyelet BED STRUCTURE Bed structure divided into 3 parts FRONT WALL Front wall with steel corner supports steel impact protection inside 350mm high BOW FRAME SCB sliding roof 180mm Height 2480mm internal width, End bow can be folded up Rental possible! Cgelq Rsil Eh Uo Nh Uot Prior sale and errors are expressly reserved! Sale exclusively in accordance with our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: new, Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Cgslqodd Dzdo R Nh Ujt Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. Colq Reh E Izfj Nh Ujgt View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, mileage: 98,265 km, power: 210 kW (285.52 HP), first registration: 01/2013, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 10,850 kg, empty load weight: 15,150 kg, tire size: 315/80R22.5, next inspection (TÜV): 02/2023, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic, lifting+lowering, rotating beacon, air-suspended, low-noise G1, last axle hydr. steered, side alu driving protection, roof hatch, environmental badge green Wheelbase: 3900 mm Body: Waste collection body HS Schörling OL21W (without body) EEV engine, front axle air-sprung, 7.5 t front axle, rear axle H7 13 t disk wheel 300, axle load measuring device, Telligent trailing axle hydraulically steered, ABS, ASR, stop brake comfort version, disc brakes on front and rear axle, front underride guard, additional stabilizer rear/trailing axle, lifting/lowering device, starting aid, parameterizable special module (PSM), on-board diagnostics 2, Allison automatic transmission 3000 P, automatic daytime running lights, engine brake can be switched on/off with constant throttle, lower radiator guard, rear engine output torque 600 Nm. Used body available for approx. 7000,-€ net. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Cslovhkvmsq R Nh Uegt

Condition: excellent (used), Year of construction: 2022, overall weight: 2,924 kg, pressure (max.): 9.8 bar, AIR COMPRESSOR i have 2 of them Cjlqjv Axxfs R Nh Uogt Model: GA132VSD+FF Max. working pressure: 9.8 Bar Total rated power: 144.4 kW Rotational shaft speed: 3700 r/min Year of manufacture: 2022 Gross mass: 2924 Kg Price: 37000 euro EXW for 1

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000x1700x2700weight approx.: 14.000COVERS DAMAGED DURING TRANSPORT. Standard equipment: ----- Cslqjttxh Ne R Nh Uegt CNC axes Y1, Y2, X and R axis CNC crowning device motorized with CNC control CNC control original DELEM DA 58 T touchscreen 15 inches Back gauge with linear guide and ball screw Sheet metal support arms on linear guides Laser protection device on the upper beam quick upper tool clamping Tool system Upper tool Promecam Amada split offset Mulit V matrix system both Promecam Amada CE protective equipment various options available                                                                                                                           KK Industries GmbH  There's something for everyone!

Condition: used, mileage: 235,000 km, power: 265 kW (360.30 HP), first registration: 09/2012, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 7,100 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, * 1st hand * Jaw coupling * Air connections * Rear axle air-suspended * Tires 80% 315/80R22.5 * Euro 5 EEV AddBlue * MKG crane HLK125 A3 * 3x hydraulic extensions * Air seat heated driver's side * Differential lock * Auxiliary drive * 8-speed split * Multifunctional steering wheel * Engine brake * Cruise control * Air conditioning * ABS * Ster * Egel * Roof hatch * Sun visor * Steering wheel adjustment Cgolqjig Unbo R Nh Uot * Payload 7000kg * WhatsApp/Tel.

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, General Data Measurements width 3000 Measurements depth 4000 Measurements height 3000 Machine weight 9000 Control unit Brand Siemens Model Sinumerik 840D Main Drive Spindle speed range 2000 - 8000 Cgjlevy Hl Isq R Nh Uot Spindle motor power 12 kw Movement X-Axis Movement 400 mm Y-Axis Movement 270 mm Z-Axis Movement 250mm A-Axis Movement 360º C-Axis Movement -230°/ +70° Table Outer length 1000 mm Outer width 270 mm Additional equipment Fanuc Model M-10iA Robotic Loader Robotic control: SYSTEMR-30/A Control Pneumatic cylinder tension/compression clamping force up to 17000 N This 5-axis HAAS Multigrind AF grinding machine was manufactured in 2010. It features a robust Siemens Sinumerik 840D CNC control, a grinding spindle speed range of 2,000 to 8,000 rpm, and a spindle power of 12 kW. The machine includes a Fanuc Model M-10iA Robotic Loader for enhanced automation and efficiency. Ideal for complex grinding tasks, the HAAS Multigrind AF machine we have for sale is a significant asset for precision machining. Contact us for further details regarding this grinding machine. Application Types Grinding

Condition: new, Fiber laser 30W Marking area: 200 x 200 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Z-axis motorized H: 700 mm Repeat accuracy/lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply 240 V/50 Hz. External dimensions: 110 x 80 x 200 cm Front door: manual Incl. software and PC Cgelq Rjru E Sve Nh Uet Can be inspected on site under power Net price plus VAT

Year of construction: 2017, Condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Csljvyiqgeq R Nh Uegt

Condition: like new (used), mileage: 370,000 km, Year of construction: 2014, IVECO DAILY 35C15 YEAR 2014 EURO 5 4.20X2.10 DUMMY WITH REAR FRAME TWIN WHEELS KM 370000 SPRING SEAT AIR CONDITIONING Cgjlq R Nhjv D Dx To Uet BENITO 3383844139 MICHELE 3394588233

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000 x 1700 x 2700weight approx.: 14.000 Celotvhxijq R Nh Uegt

Year of construction: 2003, Condition: ready for operation (used), Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible. Cgolqovyirds R Nh Uot

Year of construction: 1992, Condition: ready for operation (used), A Union horizontal drilling and milling machine overhauled in 2009 is available. Spindle diameter: 130mm, tool holder: ISO30, travel X/Y: 11500mm/3000mm, column movement Z: 420mm, drilling spindle movement W: 900mm, facing slide movement U: 320mm, spindle speed: 1000rpm, face support speed: 250rpm. Feed in all axes: 2500mm/min, rapid traverse X/Y: 5000mm/min, rapid traverse Z: 3600mm/min, rapid traverse W/U: 3150mm/min, connected load: 100kW, spindle power: 50kW. Machine dimensions X/Y/Z: approx. 17000mm/3000mm/6500mm, total system weight: approx. 60t, control system: PFP 130 NC. The drives, switchgear and control system were overhauled in 2009. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Cjlq Rsvx Twns Nh Ujgt