Used Gesan Dvs 410 for sale (3,753)

Condition: good (used), Year of construction: 1992, Functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Delnewhu Ifo U I Sbocg Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Doln Uevwlqqe I Sbecg Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2019, Year of construction: 2019, total width: 2,600 mm, total height: 2,650 mm, ID: 5512-217452 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Dslswhbyhon U I Sbjcg

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dolnsu R S Ake U I Sbjcg Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: good (used), 1 used tool milling machine Micron brand Type WF 2/3 DP with Heidenhain Type 135 linear motion control Travel X/Y/Z 400/410/400 mm Table clamping area 800 x 450 mm Speed 30 – 2240 rpm Feed rates 1 – 750 mm/rev Rapid traverse 2000 mm/min Tool holder ISO 40 Dcelnsv N Dzfo U I Sbsg Machine weight approx.: 1.4 t Space required approx.: 2.1 x 1.6 x 2.2 m

Condition: used, Year of construction: 2012, 2012 5 Color + coating unit Max size 530 x 740 mm Paper thickness 0.03 - 0.60 mm 203 million IR + Hot Air DRYER Perfecting 1/4 - 5/0 Prinect Press Center with color remote panel Prinect Press Center control panel Prinect Press Center software Prinect Pressroom Manager Prinect Cockpit Press Center MasterLevel Dcolnjwhlmrj U I Sbog Press Center Instant Gate Press Center Wall Screen Pressroom Server E 1204 Recooler GRC 430S Technotrans Feeder with non-stop device Perfect Jackets Blue AutoPlate Pro AlcoSmart, Alcolor V InkStar Saphira wash up CombiStar compact Powder suction system P-ABS 4101 V Powder star AP 262 DryStar coating Delivrey with non-stop device DryStar IR Dryer Prinect Axis Control Chamber doctor blade system Aristar ScrollStar StaticStar compact Axis Control High pile delivery In production Location: Germany Available: 12/2025

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm Dcsln Usvbgtne I Sbeg centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Dceljtk It Sen U I Sbog Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 01/2020, Year of construction: 2020, total width: 2,460 mm, total height: 2,650 mm, ID: 3559-224509 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/249cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Djln Uowhbybj I Sbjcg

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Dcolnou R S Aws U I Sbog Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Doln Uswhxias I Sbscg Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: used, mileage: 135,000 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 07/2017, loading space length: 4,400 mm, emission class: euro6, color: white, number of seats: 3, total length: 7,128 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quickly and easily contact our sales consultant Internal ID number: [ 2581 ] ----Optionally bookable: * 12-64 month warranty (valid throughout the EU) * New inspection * New MOT & AU (German vehicle inspection) * Nationwide delivery * Financing also possible without a down payment ----Vehicle highlights: * 19% VAT deductible * German vehicle * 2nd hand * Regularly serviced * Euro 6 standard * Maxi van with high roof + extra long wheelbase * Trailer hitch (3500 kg) * Automatic air conditioning * Automatic transmission * Optional equipment: Storage compartment on the dashboard with USB port, audio system: radio with CD player, MP3-compatible, USB and Bluetooth hands-free system, rear door (opening angle 260/270 degrees), automatic air conditioning, 170 cc refrigeration compressor, Load compartment partition with window, spare wheel in driving tires, spare wheel holder between floor longitudinal members, reversing aid with sensors. Additional equipment: driver's side airbag, trailer socket preparation, traction control (ASR), version: S series, exhaust pipe on the left side, electric exterior mirror. Adjustable and heated, brake assist, ceiling light in the cargo area, electric brake force distribution, rear axle suspension: parabolic, front axle suspension: transverse leaf spring, gull-wing doors at the rear, tinted windshield and side windows, 150 A generator, automatic transmission - Hi-Matic (8-speed), body/structure: high-capacity box, instrument cluster with pixel matrix display, fuel tank: 70 L, headlight range control, 2.3 L - 115 kW diesel engine, wheelbase 4100 mm, tire repair kit, low emissions according to Euro 6 emissions standard, sliding door for the cargo/passenger compartment on the right, seats in the driver's cab: single passenger seat, 3-way adjustable, maintenance indicator, permissible gross vehicle weight 3.50 t ---- Looking for leasing or financing? We offer attractive offers - even without a down payment! Please contact us. Contact: Deln U Iswhiavo Sbscg Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle is determined exclusively by the on-site purchase contract or by written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: good (used), mileage: 368,481 km, power: 551 kW (749.15 HP), first registration: 01/2019, fuel type: diesel, color: other, axle configuration: 6x4, tire size: 385/65R22,5, fuel: diesel, wheelbase: 3,400 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Fixed - Globetrotter - Hydraulic System - Alloy Wheels - Power Take-Off - Pump Dcelowg Rpcjn U I Sbeg - Auxiliary Braking System = Remarks = Number of axles: 3, Configuration: 6x4, Total Fuel Capacity: 410 liters, Fifth Wheel Height: 129 cm, Fifth Wheel: Fixed, Number of Locks: 2, Alloy Wheels, Suspension Type: Air Suspension, Cabin Type: Globetrotter, Cruise Control, Tachograph (Control Unit), Digital Tachograph, Air Conditioning, Auxiliary Heating, Color: Multicolored, Rear View Camera, Engine Power: 551 kW (739 Hp), Euro: 6, Transmission Type: I-Shift, Gears: 12, Auxiliary Braking System, Retarder Brand: Voith, Power Steering, ABS, ASR, Hydraulic System, Power Take-Off, Pump, 6x4H, X-TRACK, RETARDER, ALCOA, 6X6 LIFTING BOOGIE HYDRAULIC FRONT AXLE DRIVE = Further information = Transmission Transmission: 12-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Left tire profile: 10 mm; Right tire profile: 12 mm; Suspension: Leaf springs Axle 2: Tire size: 315/80R22.5; Twin tires; Left tire profile inside: 11 mm; Left tire profile outside: 12 mm; Right tire profile inside: 11 mm; Right tire profile outside: 12 mm; Suspension: Air suspension Axle 3: Tire size: 315/80R22.5; Twin tires; Left tire profile inside: 10 mm; Tire tread, left outer: 10 mm; Tire tread, right inner: 11 mm; Tire tread, right outer: 11 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 730 x 255 x 382 cm Functional Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 1987, Used machine Built-in mechanism for simultaneously folding up both planing tables, in seconds and almost weightless thanks to spring tension Table height adjustment via double cardan shafts, absolute parallel stroke, no adjustment during folding Thicknessing table with built-in feed roller, driven synchronously with the upper feed rollers, spring-mounted Height adjustment smooth via handwheel, precise measurement via mechanical digital display Replaceable extraction hood 150 mm 4 knife shafts; Tersa knives with slotted table lips Planing table dimensions: 2040 x 410 mm Planing width: 410 mm Max. planing height: 230 mm Deln U I Sswhuivjbjcg Motor power: 3 kW Speed: 5000 rpm Feed speeds: 8 + 14 m/min Weight: 560 kg Availability: upon request Location: Flörsheim

Condition: used, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 08/2019, Year of construction: 2019, total width: 2,600 mm, total height: 2,650 mm, ID: 9618-223729 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Dcolnewhbx Ro U I Sbjg

Condition: used, MASTERWOOD TF100 machining center -used- Machining in throughfeed, Air table at the working area, Ball screw spindles on all axes, Network card for remote maintenance, integrated control cabinet, Sawing unit for grooving in X-direction, Manual central lubrication, Sensor for panel measurement, Windows 10 PC, new drill set, new DIA milling cutter ----- Technical data ----- min. Workpiece length X: 250 mm, min. Workpiece length Y: 80 mm, min. Workpiece thickness: 10 mm, max. workpiece length X: unlimited mm, max. workpiece length Y: 1000 mm, max. workpiece thickness: 60 mm, Operating system: Windows 10, Planning software: Masterworks, Delnovira No U I Sbocg Main spindle speed: 1,000 - 18,000 rpm, Drill spindle capacity: 10, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Saw blade Ø of saw unit: 125 mm, Suction connection Ø: 150 mm, Compressed air connection: 8 bar, Dimensions (LxWxH): 1,990 x 2,410 x 1,510 mm, Weight: 1,300 kg

Condition: used, Year of construction: 1998, operating hours: 16,360 h, Field of application: Construction Serial number: 402TDC7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19410 Specifications: 1998 model Hours: approximately 16,360 Tires (see pictures) Central lubrication Leakage on the rear left side at the hub Length: 836 cm Width: 390 cm Curb weight: 30,845 kg Max payload: 37,119 kg Box (see pictures) Djln U Ievgz R Se Sbjcg Air conditioning Delivery can be arranged Description: Well-maintained tipper truck from 1998. There is a minor leak at the rear on the left side near the hub. The vehicle is well maintained and works as it should. Delivery can be arranged upon request. See video for more information. Hours: 16360 Own weight: 30845 Total Weight: 68039 Width: 390 Length: 836

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Dcoln U I Sjv Rpr Ssbog Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: good (used), Year of construction: 2014, Mfd. 2014 Cutting area X axis 1'800 mm Y axis 1'800 mm Z axis 1'210 mm A axis +/- 105 ° C axis 360 ° Spindle Main drive Spindle power 94 / 113 kW Spindle speed 12'000 min-1 Torque spindle max. 300 / 410 Nm DDT Spindle power 105 / 125 kW Spindle speed 3'000 min-1 Dcelsvzb S Sjn U I Sbeg Torque spindle max. 844 / 1'202 Nm DDT Spindle power 63 / 75 kW Spindle speed 14'000 min-1 Torque spindle max. 200 / 275 Nm NC Rotary table Dimension milling ø 1'400 x 1'200 mm Dimension turning ø 1'400 / ø 1'800 mm Max. Rotary diameter ø 1'900 / ø 2'200 mm Tool changer Tool changer, places 92 / 204 Max. tool length 600 mm Max. tool diameter 125 / 250 mm Control Heidenhain TCN640 Siemens 840D sl Pallet changer Machine weight ø 1'800 x 1'400 mm Machine weight ø 1'400 / ø 1'800 mm Max. load 4'500 kg Quantity pallets 2 / 3 / 4 / Machine specifications Machine weigth 42'000 kg Dimensions length x width x height 6'200 x 6'500 x 3'900 mm

Year of construction: 1994, Condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Dcjln U Isfthzko Sbog Tech. Data and dimensions: Errors excepted.

Condition: good (used), roller chain, drive chain, duplex chain -Manufacturer: Rexnord, drive chain duplex chain heavy version type R38-2 with 4 chain locks Dolnsvcykpo U I Sbscg -Length: 4600 mm -Pitch: 38.1 mm / 1 1/2" Roll width 25.4 mm -Transport dimensions: 480/410/H120 mm -Weight: 78.8 kg

Condition: used, Year of construction: 2007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, controller manufacturer: BROTHER, total height: 2,165 mm, table width: 270 mm, table length: 500 mm, overall weight: 2,100 kg, spindle speed (max.): 22,000 rpm, plate length: 500 mm, space requirement length: 12,341 mm, space requirement width: 1,410 mm, CONTROLS .. CNC controls BROTHER WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 350 mm .. Y-axis travel: 250 mm .. Z-axis travel: 350 mm FLOOR PLATE .. table surface (left-right): 500 mm TABLE .. table surface (left-right): 500 mm .. table surface (front-back): 270 mm AXIS DRIVES .. rapid traverse X: 50000 mm/min .. rapid traverse Y: 50000 mm/min .. rapid traverse Z: 50000 mm/min TOOL MAGAZINE .. magazin type: chain magazine .. number of positions: 26 .. tool diameter max.: 125 mm .. tool length max.: 200 mm .. tool weight max.: 3.5 kg .. tool changing time: 0.7 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: table changer .. number of store positions: 2 .. workpiece load (max): 80 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 12341 mm .. space requirements -front/back-: 1410 mm .. total height: 2165 mm .. total weight approx.: 2100 kg Dcsln Uswaazbj I Sbjg ATTACHMENTS .. chip conveyor: yes SPINDLE / HEAD .. spindle revolutions (max): 22000 /min Special feature: Table designed as a rotary changer, loading of clamping fixture via magazine and ABB-Robot.

Condition: used, mileage: 410,000 km, Year of construction: 2013, Serial number: YS2R6X4000209xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18936 Specifications: - Km: Approx. 396,000 - Gear: Automatic - Retarder - Euro 5 - Suspension: Steel - Okay tires - Heat in the box - 6x4 - Trailer hitch - VBG - Sign box - Rotor lamp - 560 Hp - Tool box - Bed - Radio/CD - Air conditioning/OFF - Service done by owner and at a local workshop - Ready for delivery Description: Scania R560 Tipper from 2013. 6x4 with heat in the box. Normal maintenance is carried out by owner and at a local workshop. ABS fault on 3rd axle. Eu-approved and ready for delivery. Km: 410000 HK: 560 Technical approved: Yes EU-approved until: 20.12.2025 Own weight: 13640 Total Weight: 30000 Payload: 16285 Dcjlovgyt Ssn U I Sbsg Width: 255 Length: 742 Euro: 5 Gearbox: Automatic

Condition: good (used), Year of construction: 2007, 5-Axis Machining Center Manufacturer: Matsuura Dcjlsltludjn U I Sbsg Type: MAM 72-25 V Year of Manufacture: 2007 CNC Control: Fanuc G-Tech 30i Travel: X/Y/Z: 550 x 410 x 450 mm Table Size: Ø 130 mm Spindle: 15,000 rpm Pallet Changer: 10-Station Tool Magazine: 60-Station Knoll High-Pressure System Internal Coolant 70 bar 080525ä

Condition: good (used), power: 354 kW (481.31 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2019, operating hours: 8,351 h, Equipment: air conditioning, all wheel drive, General information Field of application: Construction Serial number: VCE0A45GP00352182 Delewgny Ejn U I Sbecg Technical information AdBlue system: Yes Make of engine: D16J Top speed: 57 km/h Empty weight: 31.100 kg Functional Cargo space capacity: 25.000 l Condition Technical condition: good Visual appearance: good Other information Max. working load: 41000 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,42x3,51x3,65 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information