Used Gesan Dv 130 for sale (20,080)

Condition: excellent (used), mileage: 831,300 km, power: 375 kW (509.86 HP), first registration: 11/2013, fuel type: diesel, axle configuration: 4x2, tire size: 315/70 R22.5, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, sleeping cabin, spoiler, = Additional Options and Accessories = Dkjb Ejwd Nd Hep Sxvel - Aluminum fuel tank - Roof spoiler - Dual fuel tank - Intarder - Radio/CD player - Sleeping cabin - Sunshade - Auxiliary heating = Remarks = TRANSPORT TO ANTWERP 390 EURO = Additional Information = Tire size: 315/70 R22.5 Front axle: Steered; Suspension: Leaf springs Rear axle: Twin tires; Suspension: Air springs Curb weight: 8,193 kg Dimensions (L x W x H): 610 x 255 x 385 cm MOT (General Inspection): inspected until 11/2025 Technical condition: very good Visual condition: very good Reference number: 12

Year of construction: 2023, Condition: new, New device 12 months warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + rapid swelling during mixing without ice + woollier doughs due to freshly chilled, liquid ice water + exact dosing via water mixing and dosing device possible Dkob Ep Ssivdvksxvjl + water-bearing parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + constant low water temperatures + powerful chillers + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + drain cock in ice water bath + high flow rate + compact dimensions + easy to clean surface structure + low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall bracket (for model L130 + L170): + 349,-- € net - Machine table (for model L130 + L170): + 469,-- € net - Switching valves 3-way --- for water mixing and dosing units with only 2 inlets (cold / warm) + 279,-- € net Technical data: - Batch size (recommended): up to 40 liters - Continuous capacity*: 70 liters / hr. - Peak cooling capacity*: 230 liters / hr. - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connected load: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17,5°C inlet and +2,5°C outlet

Condition: excellent (used), Track roller, steel roller, guide roller, support roller, cam roller Dkob Ep Sxev U Nlgovsl -Manufacturer: Harhues & Teufert, cam roller type KEHT 130PP unused Ovp .: 95173 1048 1462 -Mounting: Ø54 mm / M42x3 -Number: 4x cam roller available -Price: per piece -Total dimensions: Ø 130 x 135 mm -Weight: 6.3 kg/piece

Year of construction: 2002, Condition: repair required (used), Functionality: limited functionality, machine/vehicle number: 011334-02, EKRA E5 Screen Printer + MIMOT Advantage 33 BI type MP1260.2 + MIMOT MX EKRA E5 Screen Printer Serial No: 801026 Year: 2006 Price: 6000 EUR MIMOT Advantage 33 BI type MP1260.2 Serial No: 011334-02 Year: 03/2002 Price: 6000 EUR MIMOT MX Dkeb Ep Sxswh Ny Nsvol Price: 6000 EUR

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 650 mm Y-AXIS TRAVEL: 320 mm Z-AXIS TRAVEL: 320 mm RAPID FEEDS X-Y-Z: 40 - 30 - 30 m/min SPINDLE: 22000 rpm; 12-17 kW TABLE SIZE: 1200 x 400 mm TOOL MAGAZINE: 18 POS CONTROL UNIT: ELEXA E550 Dkeb Ep Sxeh Stv Revsl WEIGHT: 4500 Kg OVERALL DIMENSIONS: 2200 x 2100 x 2400 mm

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80 Djb Ep Sst Ty A Aexvekl

Condition: used, machine/vehicle number: 005588, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Dob Ep Sewcx U Ejxvjkl Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Year of construction: 2017, Price: On request Top-bottom sander Houfek SPB 1300 Duplex Serial number SJ-031 Year of construction 2017 Min-maximum workpiece height 10-160 mm Maximum working width 1300 mm Feed speed 4/12 m/min Sanding belt dimensions 1900*1320mm Motors 11kW Top sander 2x contactals 1x Combi roller Under sander 2x contactals 1x Combi roller CD software available Includes manifold for extraction pipe 110.4kW, 223Amp. - Year: 2017 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkjbsv Ulz Rs Ep Sxvjl Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, mileage: 280,811 km, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 1,160 kg, first registration: 02/2019, emission class: euro6, number of seats: 7, Equipment: ABS, power assisted steering, For information Dkjb Ep Sxsv D H Rrevel

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec Dobou T Nknj Ep Sxvskl - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 3,300 mm, Model: KR150 L130 Condition: USED Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Dkjb Ep Sxohakfajvel

Condition: excellent (used), TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE) Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal sense (length-wise) Built-in electric and command panel 1st Table (crosswise) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (lengthwise) with motorized rollers Deb Ep Sxjfi Tmtovokl Min dimensions of the panels (mm) 250 x 320 (ca.) Max dimensions of the panels (mm) 1300 x 2100 (ca.) Min/Max thickness of the panels mm 10 / 50 (ca.) Total installed motor power Kw 3,5 (ca.) Total length of the machine mm 3300

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Dkeb Eewcx Ufsp Sxvel

Condition: used, Year of construction: 1996, Price: On request BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Dkobsv Ukdws Ep Sxvol Revised by Boere in 2019 - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: reconditioned (used), Year of construction: 2007, Advantage 700 single-sided edge banding machine Dkob Ep Sxsvw Sgrevol Equipment: - Working length 8600 mm - Infeed table for small pices - Spraying unit top and bottom - Milling units 08.376 - IR-Radiator 300 long, 2 x 1.5 kW for preheating the workpiece edge - Gluing unit 283.1513 - Strip control to prevent incorrect gluing - Pneumatic trimming unit 08.415 - Spraying units lubricant - Milling unit 08.055 - MFA Corner rounder 08.342 - Profile scraper unit 08.519 - Spraying units for application of cleaning agents - Self-feeding scraper unit 08.050 - Polish unit 08.612 - Groove and profile milting unit 08.183 - Interior cabin lighting - Electronic height adjustment of top pressure (one-sided) Technical data "workpiece” - Workpiece length min.: 150 mm - Workpiece width min.: 65*/ 150 mm (*with max. workpiece thickness of 25 mm) - Workpiece thickness min.: 8 / 12* mm (*with profile scraper) - max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross section) - workpiece shape: rectangular - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, foil, veneer Technical data "Edge material” Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*foil only with additional equipment) - veneer edges: 0.5 - 3.0 mm Edge cross-section for veneer max.: 150 mm² Edge cross-section for plastic edge max.: 180 mm² Cut-to-length edge strips: strips 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Edge height min.: 12 mm Edge height max.: 65 mm Upper edge protrusion max.: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (chamfer 15°) - Plastic edge up to 3.0 mm (radius depending on tool) - strip up to 3-12 mm (flush milling) Technical data "machine” working length 8600 mm Feed speed 4 - 20 m/min for Advantage 700 Constant workpiece protrusion from the chain track: 35 mm + Edge thickness max. cross section: 520 mm² Throughfeed width min. (with 35 mm projection): 65 mm Workpiece length in feed direction min.: 150 mm basic height (upper edge of chain track): 900 mm Unit side: In feed direction left Control voltage: 24 V DC / 230 V AC Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (FI protection circuit not applicable) Machine control Features: - PC-based control system - Simple, machining-related program creation - Navigation and operation via touch screen - Program memory for max. 1000 programs - Program number 3-digit numeric - Panel PC with integrated 15" TFT display, with touch screen - Operating system: Windows Note: The technical data and descriptions are a copy of the order confirmation at that time. Data are for information only and are not binding. Condition: - Machine completely overhauled - upper pressure belt new - Feed chain new - Feeler wheels and tools of finishing new This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm Dkeb Epsur H Ehs Sxvel - Weight approx. 1200 kg - various guide cartridges

Condition: good (used), Code: 0087 Brand: LEVIGALTECNICA Model: 1300 SRN Dob Ejwbhmuep Sxvekl Automatic 1-belt wide belt sander for furniture, custom-made furniture, panels, wooden frames, doors and various Technical data: Working width mm 1300 Working height min/max mm 3-175 Calibrating/Sanding rubber roller diameter mm 250 Motor Hp 25 Brackets holding small parts Belt size mm 1900 x 1330 Automatic table positioner Electronic positioning display Belt feed at 2 speeds 2 infeed support rollers 2 outfeed support rollers Overall dimensions mm 2100 x 1600 x 1950 h Weight kg 2300

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric cabinet and command panel Total installed motor power KW 3,5 (ca.) 1st table (longitudinal) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd table (cross) with motorized rollers Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 2100 (ca.) Dkjb Epefi Tris Sxvjl Min/Max thickness of the panel mm 10 / 50 (ca.) Total length mm 5680

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 2,100 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 300 mm, High-performance CNC router – the complete solution for wood and composite materials processing The CNC router 2130 ATC Master Drill NEST is designed for efficient processing of solid wood doors, furniture fronts made of chipboard, MDF or other similar materials. Equipped with a powerful 9 kW air-cooled motor, it allows for high-quality finishes and cutting at speeds of over 18 m/min. Solid and durable construction The 10 mm steel base provides stability, and the HIWIN industrial sliding system with 30 mm rails and recirculating balls ensures precision and speed in any working position. The clamping of the parts is carried out by vacuum, and the centralized lubrication system reduces wear and maintenance. Automatic performance and high productivity The automatic loading and unloading table, together with the adjustable 3-piston loading device and the material pushing system, optimizes work cycles. Optical sensors automatically detect the presence of plates, reducing errors and downtime. Advanced precision and versatility The drive system on the X and Y axes with bevel gear and rack, and on the Z axis with ball screw, guarantees smooth movements and total control. The linear tool magazine with 8 or 12 positions, pneumatically operated, allows for quick cutter changes, increasing process efficiency. Intelligent control and compatibility The NC Studio control unit is easy to use and compatible with most CAD/CAM software. Precise spindle adjustments and automatic tool measurement contribute to accurate machining, even in continuous mode. Essential Auxiliary Equipment Multi-operation Drilling Unit Impact and vibration resistant polyamide table Double piston reference limiters Efficient exhaust hood Strategically placed emergency buttons Key Benefits: Fast and quality machining with minimal personnel Low maintenance and extended service life Fully automated system for maximum efficiency This CNC router is part of the ATC Drill NEST series and is ideal for modern workshops looking for speed, precision and automation in the production of furniture, doors or decorative panels. Available in the 2128 ATC Drill NEST, 2140 ATC Drill NEST, 2145 ATC Drill NEST variants. Flexibility in configuration gives you full control over the machine model required for your business. Djb Ep Sewhbppsxvskl Manufacturer DANIBRUM – Romania Working surface X - Y 2100 x 3000 mm Height stroke 300 mm Milling motor power 9 kW Maximum working speed 24000 rpm Motor cooling mode Air Converter yes Hiwin linear guide 30 mm Height adjustment - Z axis TBI 2502 ball screw Basic system with controller NC STUDIO Supply voltage 400 V – 3 Phase – 50 HZ Technical support available in Romanian, English, German.

Condition: like new (used), Functionality: fully functional, mileage: 189,000 km, fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, overall weight: 3,500 kg, first registration: 10/2018, loading space length: 3,100 mm, loading space width: 1,740 mm, loading space height: 1,870 mm, emission class: euro6, color: white, tire size: 225/65r16, Equipment: crane, Ref.: 2760. Vehicle brand RENAULT model MASTER 2.3 DCI, with 130 HP, equipped with PERSON LIFTING BASKET, EURO 6, has controls in the basket and below on the platform, up to 12 m working height, interior dimensions of the van 3.10 m long x 1.74 m wide x 1.87 m high, signals and work lights, for 1 person, manual transmission, tire dimensions 225 / 65r16, wheelbase 3.68 m long, GVW 3,500 kg, ... in perfect condition !!! Dsb Ep Sov Rcbtoxvjkl

Condition: used, mileage: 262,600 km, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 1,150 kg, first registration: 02/2016, emission class: euro5, number of seats: 3, Equipment: ABS, power assisted steering, For information Dksb Eowgfq Ujp Sxvjl

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg Dkob Esu Aq Amep Sxvel

Condition: excellent (used), Year of construction: 2003, Year - 2003 Line consists : - Input conveyor logs - Hydraulic trolley 4 stapler ( two movable ) - Sawmill - Output conveyor - Output conveyor for board 2 pieces - Inlet conveyor to cross cutter - Cross board cutter - Multi-blade cutter 2 pieces 35 and 50 kw - Command desk - Electrical cabinet Dsb Esvf Ek Hep Sxvekl - Complete suction system with silo 80 m3 - Workshop set for sawmill maintenance: - Saw welder - An iron - Sharpener

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 Djb Ep Ssu Aqz Aoxvekl - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 Dkob Ep Sjut Uzajxvjl - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges