Used Gesan Dvs 130 for sale (4,181)

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 13939866B – including test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damages such as fractures, as these are beyond repair. In such cases, a subsequent charge of €500 incl. VAT will be applied. Attention: You are bidding on an inverter from Heidenhain UV 130 ID: 324 998-03 SN: 13939866B on an exchange basis (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakages, as these are no longer repairable. In this case, a surcharge of €500 incl. VAT will apply. Gjdjy Nrm Uopfx Aqxoub

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 . 100455119 F-No. 2315656 Planetary gearbox Serial number: 7777, unused, in sealed original packaging, 100% operational, scope of delivery as per photos. Gsdpfsy Nrzljx Aqxeub

Condition: new, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV Permanent Magnet Motor, MNR: R911245926, SN:MAC117-00854, unused with signs of storage, 100% functional, scope of delivery as per photos Gsdpfei D Ngnex Aqxoub

Condition: new, Rexroth MAC112C-0-CD-3-F/130-B-0/S095 Permanent Magnet Motor, MNR:R911232740, SN:51156, unused in opened original packaging, 100% functional, scope of delivery as per photos Guedpfx Aqsi D Nggexeb

Condition: new, Neugart WPLS142-005-SSSB3AG-E24/50/130/165/B5/M10 bevel gear Item No. 100336738 SN:2231204-1, unused in opened original packaging, 100% functional, scope of delivery as per photos Guodpfji Eb Ufsx Aqxsb

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers -Load capacity: 10 tons/piece Gujdpswxu N Rjfx Aqxob -Rollers: Ø 30 x 70 mm -Submission/Price: complete -Dimensions each: 270/130/H90 mm -Weight: 12.7 kg/pc.

Condition: new, sheet width 1550 mm Gedpfx Aqsyvvrhoxoub plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: good (used), CNC FAGOR 8055 X: 3.000 mm Y: 2.000 mm W: 1.000 mm Speeds: 6–1.200 rpm Taper ISO 50 Roraty table Wotan de 4º axis Surface: 2.000 × 1.850 mm Gsdoy Slbkopfx Aqxoub Longitudinal: 2.000 mm Max. weight allowed: 12 toneladas 4 Floor plates 1.500 × 2.500 mm Some accesories Facing head 700 mm

Condition: good (used), mileage: 218,271 km, power: 96 kW (130.52 HP), first registration: 09/2019, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,180 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,200 mm, total width: 2,070 mm, total height: 2,600 mm, loading space length: 2,600 mm, loading space width: 1,760 mm, loading space height: 1,890 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen headlights - incl. ladder - Tail lift - Manual - Radio/Cassette - Reversing camera - Fabric upholstery - Partition wall = Remarks = Configuration: 4x2, Payload: 945 kg, Curb weight: 1855 kg, Gross vehicle weight: 2800 kg, Unbraked towing capacity: 750 kg, Center axle braked towing capacity: 2500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking aid: rear, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, GPS navigation, Color: Green, Maintenance manual, Heated mirrors, Reversing camera, Lighting type: Halogen, Bluetooth, Engine output: 96 kW (129 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side panels lined, Roof rack: incl. ladder, Side doors: 1, Rear closure: double doors, Central locking, Number of seats: 3, Seating configuration: 1+2, Seat trim: fabric, Seat adjustment: manual, Tail lift, Tail lift version: rear tailgate, Tail lift capacity: 500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel and aluminum, Tail lift size: 70 x 155, L1H2, Tail lift, air conditioning, navigation, camera, roof rack, ladder. Tire type: all-season tires = Further Information = General Information Number of doors: 1 Registration: VBZ-71-G Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: coil spring Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: leaf spring Weights Unladen weight: 1,855 kg Payload: 945 kg Gross vehicle weight: 2,800 kg Functional Tail lift: Dhollandia, rear tailgate, 500 kg Load floor height: 54 cm Condition Technical condition: good Gjdpfx Ajy Hqgusqxjub Optical condition: good Damages: none Number of keys: 2 Financial information Lease price: €177 per month (van, 72 months); Ask for further information and conditions.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing Gujdpfxsy H Hk As Aqxsb - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Guodpoy H Akrofx Aqxjb Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: used, mileage: 132,947 km, power: 96 kW (130.52 HP), first registration: 08/2019, fuel type: diesel, fuel: diesel, color: other, emission class: euro6, total length: 6,750 mm, total width: 2,070 mm, Year of construction: 2019, Unladen weight: 3,005 kg Gjdoy R Dkbjpfx Aqxeub Payload: 495 kg Gross vehicle weight: 3,500 kg Damage: none

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display Gusdpey Hkgbefx Aqxjb - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time Guedpfx Aqey Hkfdsxsb ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel Gsdjy Hkd Hepfx Aqxjub - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Year of construction: 2024, condition: used, General information New: Yes Technical information Power: 95 kW (129 HP) Chassis type: rigid Empty weight: 7.682 kg Make of engine: Deutz Top speed: 40 km/h Functional Lifting capacity: 3.500 kg Lift height: 608 cm Other information Rental currency: EUR Production country: FR Additional information Please contact KEY-TEC Sales for more information Godpjx E Nhnsfx Aqxeub = Additional options and accessories = - Air conditioning

Condition: new, mileage: 10 km, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 2,400 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Comfort Connect package with Multiflex cab Additional equipment: Gedpfx Asyz Hmyjqxsub Passenger airbag, deactivatable passenger airbag, driver airbag, automatic light follow-me-home function, electrically adjustable and heated exterior mirrors, exterior mirrors with black caps, on-board computer, brake assist, rear parking sensors, increased payload, rear wing doors without windows, body type: panel van, head airbag system, height- and reach-adjustable steering column, facelift/model update, engine 1.5 L - 96 kW Diesel FAP, electric parking brake, Peugeot Connect Box / SOS button (emergency call and vehicle localization), wheelbase 2975 mm, tire repair kit, tire pressure monitoring system, safety package, low emissions according to Euro 6e standard, gear shift indicator, Eco-LED headlights, right sliding door, SCR system (AdBlue technology), front side airbags, black side protection strips, seat upholstery: Curitiba fabric, smartphone docking station, start/stop system, automatic door unlocking in case of accident Errors, alterations and prior sale excepted. The information provided on equipment in this advertisement does not represent guaranteed features in the legal sense and serves solely for general information. Only the features included in the purchase contract are binding.

Condition: used, mileage: 23,632 km, power: 96 kW (130.52 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, CO₂ emissions: 239 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 7, total length: 6,200 mm, total width: 2,200 mm, total height: 2,330 mm, loading space length: 2,790 mm, loading space width: 2,140 mm, Year of construction: 2022, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power mirror, start-stop system, trailer coupling, = Further options and equipment = - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Power windows (front) - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Collision warning system Guedpfx Aqsutxa Tjxeb - Leather steering wheel - Lumbar support - Front center armrest - Multifunction steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Headlight assistant - Lane keeping assistant - Immobilizer - Bluetooth-enabled telephone - Connected services - Heated windscreen = Further information = General information Number of doors: 4 Model range: Aug. 2019 - July 2023 Cab: double Technical information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Maximum speed: 157 km/h Dimensions Length/Height: L3H1 Weights Unladen weight: 2,236 kg Payload: 1,264 kg gross vehicle weight: 3,500 kg Max. towing capacity: 2,800 kg (without brakes 750 kg) Interior Interior: black Consumption Average fuel consumption: 6.9 l/100km Maintenance, history and condition APK (general inspection): valid until 11/2026 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 19,387 km, power: 96 kW (130.52 HP), first registration: 05/2024, fuel type: diesel, fuel: diesel, CO₂ emissions: 254 g/km, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, loading space length: 2,410 mm, loading space width: 2,140 mm, Year of construction: 2024, Equipment: Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, parking heater, power mirror, seat heater, start-stop system, trailer coupling, = Additional Options and Equipment = - Armrest - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Front electric windows - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable front seats - Multifunction steering wheel - Fog lights - Radio with DAB+ - Reversing camera - Driver's seat heating - Immobilizer - Bluetooth telephone connectivity - Heated windscreen - Xenon lighting = Additional Information = General Information Number of doors: 4 Model year: 2026 Cabin: Double cab Gjdpoydm I Isfx Aqxoub Technical Information Number of cylinders: 4 Engine displacement: 1,995 cc Dimensions Length/Height: L2H1 Weights Unladen weight: 2,101 kg Payload: 1,039 kg Gross vehicle weight (GVW): 3,140 kg Maximum towing capacity: 2,350 kg (unbraked 750 kg) Interior Interior color: Black Maintenance, History, and Condition APK (Roadworthiness inspection): Valid until 05.2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen, Wasaweg 22, 9723JD GRONINGEN, NL

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 04/2016, next inspection (TÜV): 02/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2015, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Guodsv I Idbepfx Aqxob Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).

Condition: like new (used), I am selling a complete Yaskawe Motoman UPT 130 T robot. Godpfsu Tk H Djx Aqxoub

Condition: used, mileage: 269,907 km, power: 251 kW (341.26 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 8 m³, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR (Anti-Slip Regulation) * ESP (Electronic Stability Program) Gujdjwq Ah Sspfx Aqxob * Lane keeping assistant * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Driver’s air-suspended seat * Rear axle differential lock * Steel bumper * Top air intake * Trailer coupling * 2-line air connection * Hydraulic connection for trailer * Radio * 9-speed * Suspension: Leaf springs * Payload: 8345 * Retarder: Engine brake ----Special superstructure: Crane: Palfinger PK 13001-KA (Power Link Plus), max. lifting capacity 5.58t, foldable, 2x hydraulic extension, right/left operation + control stand, 6th and 7th control circuit for rotary servo and grab operation. Load chart readings: lifts 3.45t at 3.6m, 2.35t at 5.2m, 1.7t at 7.1m.----Body: Meiller 3-way pallet tilting body, raised steel front wall, aluminium rear wall, spring-assisted aluminium side walls left + right (oscillating + foldable), steel floor, lashing rings. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY EQUIPMENT & ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see imprint).

Condition: used, mileage: 269,907 km, power: 251 kW (341.26 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 8 m³, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS Gjdpfx Aqjwq Aicexoub * ASR (anti-slip regulation) * ESP (electronic stability program) * Lane departure warning system * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Rear axle differential lock * Steel bumper * Top-mounted air intake * Trailer coupling * 2-line air connection * Hydraulic connection for trailer * Radio * 9-speed * Suspension: leaf spring * Payload: 8,345 kg * Retarder: engine brake ----Special body: Crane: Palfinger PK 13001-KA (Power Link Plus), max. lifting capacity 5.58 t, folding, 2x hydraulic extension, right/left operation + control stand, 6th and 7th hydraulic circuits for rotation servo and grab operation. Read load chart: lifts 3.45 t at 3.6 m, 2.35 t at 5.2 m, 1.7 t at 7.1 m.----Body: Meiller three-way tipper body for pallets, reinforced steel front wall, aluminum rear wall, spring-assisted aluminum drop sides left and right (swinging and foldable), steel floor, lashing eyes. Sale only to commercial customers. FOR EXPORT ONLY THE NET PRICE IS PAYABLE!!!!! ALL SPECIFICATIONS WITHOUT GUARANTEE, ESPECIALLY EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions apply to all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see legal notice).

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: Gusdowimvwopfx Aqxob 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Console machine (6 units) Travel dimensions: X = 3490 mm Y = 1690 mm Z = 205 mm Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm Drilling head TF 20 Power: 2.2 kW 8 vertical spindles, spindle spacing 32 mm in X Gedpfx Aqsy Ih Rmjxjub 6 vertical spindles, spindle spacing 32 mm in Y 2+2 horizontal spindles in X 1+1 horizontal spindles in Y with integrated grooving saw blade 120 mm with electro-milling spindle 9.2 kW with ISO-30 interface with C-axis with angle aggregate with 12-position tool changer with tool change station for angle aggregates with vacuum pump 80-100 m³/h Total connected load: 16 kW Compressed air: 6 bar Compressed air consumption: 210 NL/min Extraction nozzle: 250 mm Extraction volume: 5300 m³/h Extraction speed: 30 m/sec Dimensions: 5940 x 3800 x 2510 mm Weight: 3700 kg Availability: by arrangement Location: 63934 Röllbach