Used Gesan Dps 13 Supersilent Generatorset for sale (31,746)

Condition: used, mileage: 55,587 km, power: 235 kW (319.51 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, first registration: 04/2022, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, MAN TGM 18.320 4x2 BB with Fassi F135 Meiller tipper * Wheelbase 3,875 mm * Rear frame overhang 1,125 mm * MAN TipMatic 12 12 OD transmission * 150-liter fuel tank, right-hand side * 35-liter AdBlue fuel tank * VP-09 driven front axle * 7.5-ton parabolic front springs * 11.5-ton parabolic rear springs * Hydraulic steering * Height and tilt adjustable steering wheel * MAN BrakeMatic * AP axle ratio i=4.83 * Rear axle differential lock * Front axle differential lock with buzzer * MAN EasyStart with TipMatic * C cab 2,240 mm wide, 1,620 mm long * Air-suspended driver's seat with lumbar support, shoulder adjustment, and heating. Static passenger seat with storage compartment * Vico fan * EDC engine control * Oil pan for gradeability up to 30% * Transmission functionality: Efficient Roll * N-drive NH/1C without flange f=1.22 * Fuel pre-filter (oil-water separator) * Meiler axial pump 270/45 * Actuator for tipping bridge in the cab with loading crane * Front-wheel drive can be engaged * Comfort driver package * Air conditioning with automatic Temperature control * Engine brake with additional brake pedal actuation * Flame start system * Rear underride protection * Rockinger 400G150A trailer hitch * Steering wheel lock * Multifunction steering wheel for cab * Drum brakes front and rear axle * Coil-sprung cab suspension * Headlight range adjustment * Halogen twin headlights H7 Deb Hadgswg Stcoaocg * 2 work lights on cab roof * Central locking * Remote control for central locking * TollCollect preparation * 24 V 15-pin trailer socket at the end of the frame * Trailer socket for ABS at the end of the frame * 2 x 12 V 180 Ah batteries * Audible warning system can be deactivated * Cruise control * MAN sound system * MAN Media Package Navigation * Navigation SD card Europe Total * Digital radio reception DAB+ * Hands-free functionality Comfort * MAN CameraView preparation for rear view camera (2 cameras) * AUX-in/USB in the Dashboard * 2 halogen rotating beacons * Rear axle stabilizer * Front axle stabilizer * Tinted laminated glass windshield * Tinted door windows * Electric door windows for driver and passenger * Folding sun visor * Sun visor in front of windshield * Right-hand curb mirror, heated and electrically adjustable * Heated and electrically adjustable rearview and wide-angle mirrors * Spray mist reduction * 1 wheel chock * Smoking kit * 600 mm side walls * Folding side walls * 800 mm front wall * Access ladder stored under tipping body * 600 mm rear wall * FASSI F135AC.0.24 loading crane * Hydraulic outriggers * Radio remote control We are happy to provide you with further information.

Condition: good (used), mileage: 908,767 km, power: 338 kW (459.55 HP), first registration: 10/2015, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 385/55, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, = Additional options and accessories = - Hydraulic tilt system - Power take-off (PTO) = Additional information = AdBlue system: Yes Transmission: I-shift, 15-speed, automatic Djb Hadewg Alcjgaecg Front axle: Tire size: 385/55; Steered; Left tire profile: 65%; Right tire profile: 65%; Suspension: Leaf spring Rear tire size: 315/70 Body make: Volvo Technical condition: Good Visual condition: Average Damage: Damaged vehicle (not drivable) Contact Maarten Busser or Niels Busser for further information.

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Djbowcnb Uj Hadgaocg

Condition: good (used), - Used machine - Passage width: 1350 mm - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW Dobjwhvfxe Hadgascg - Voltage: 400 V

Year of construction: 2012, Condition: ready for operation (used), A Scharmann bench drilling and milling machine is available. The machine was completely overhauled in 2012, travel X/Y: 6150mm/3500mm, digital display: Heidenhain, including a setting table. An on-site inspection is possible. Djb Hadgjwhfpasajcg

Condition: used, Year of construction: 1985, operating hours: 891 h, Empty weight: 12.365 kg Dsb Hewckrpoadgaocg Dimensions (LxBxH): 916 x 244 x 317 cm Serial number: 078 Condition undercarriage: 90% Ex-army Caterpillar 130G Motor Grader, Only 891 hours on meter! Machine is in as-new condition, Low profile E-rops cab, 6F-6R powershift transmission, 12ft (3.65 Mtr) moldboard with new cutting edge, hydr. tip control, rear ripper with full set of teeth, scarifier, centershift, engine enclosures, 14.00R24 Firestone tyres on average 90% remaining, front and rear work lights. Machine is in very clean condition. Machine can be repainted in original Cat colors at extra costs. Inspections are welcome. Multiple units available from stock!

Condition: used, mileage: 55,587 km, power: 235 kW (319.51 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2022, emission class: euro6, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN TGM 18.320 4x2 BB with Fassi F135 tipper trailer * Wheelbase 3,875 mm * Rear frame overhang 1,125 mm * MAN TipMatic 12 12 OD transmission * 150 l fuel tank, right * 35 l AdBlue fuel tank * VP-09 driven front axle * 7.5 t parabolic front springs * 11.5 t parabolic rear springs * Hydraulic steering * Height and tilt adjustable steering wheel * MAN BrakeMatic * AP axle ratio i = 4.83 * Rear axle differential lock * Front axle differential lock with buzzer * MAN EasyStart with TipMatic * C cab 2,240 mm wide, 1,620 mm long * Air-suspended driver's seat with lumbar support, shoulder adjustment, and heating. Static passenger seat with storage compartment * Vico fan * EDC engine control * Oil pan for gradeability up to 30% * Transmission functionality: Efficient Roll * N-drive NH/1C without flange f=1.22 * Fuel pre-filter (oil-water separator) * Meiler axial pump 270/45 * Actuator for tipping bridge in the cab with loading crane * Front-wheel drive can be engaged * Comfort driver package * Air conditioning with automatic Temperature control * Engine brake with additional brake pedal actuation * Flame start system * Rear underride protection * Rockinger 400G150A trailer hitch * Steering wheel lock * Multifunction steering wheel for cab * Drum brakes front and rear axle * Coil-sprung cab suspension * Headlight range adjustment * Halogen twin headlights H7 * 2 work lights on cab roof * Central locking * Remote control for central locking * TollCollect preparation * 24 V 15-pin trailer socket at the end of the frame * Trailer socket for ABS at the end of the frame * 2 x 12 V 180 Ah batteries * Audible warning system can be deactivated * Cruise control * MAN sound system * MAN Media Package Navigation * Navigation SD card Europe Total * Digital radio reception DAB+ * Hands-free functionality Comfort * MAN CameraView preparation for rear view camera (2 cameras) * AUX-in/USB in the Dashboard * 2 halogen rotating beacons * Rear axle stabilizer * Front axle stabilizer * Tinted laminated glass windshield * Tinted door windows * Electric door windows for driver and passenger * Folding sun visor * Sun visor in front of windshield * Right-hand curb mirror, heated and electrically adjustable * Heated and electrically adjustable rearview and wide-angle mirrors * Spray mist reduction * 1 wheel chock * Smoking kit * 600 mm side walls * Folding side walls * 800 mm front wall * Access ladder stored under tipping body Dceb Hswg Srxjadgaog * 600 mm rear wall * FASSI F135AC.0.24 loading crane * Hydraulic outriggers * Radio remote control We are happy to provide you with further information.

Condition: used, Year of construction: 1927, container ship, cargo ship -Year of construction/location: 1927, Slikkersveer Netherlands -Length: 84.82 m Dcsb Hadgok Sarqjaog -Width: 9.17 m -Side height: 2.56 m -Load capacity max. 1300 tons at 2.53 m draft -Loading space volume: approximately 1690 m3 -Main engine: -MWM TBD 602 - V12S -Power 515 kW at 1500 rpm -Number of cylinders: 12 cylinder V-engine -Charging: Turbocharger -Consumption: approx. 150 liters/hour

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. Dsb Hadgjwcm Igeaocg It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2011, Functionality: fully functional, total height: 2,317 mm, pressing force: 36 t, total width: 2,140 mm, total length: 2,740 mm, throat depth: 410 mm, overall weight: 3,600 kg, operating speed: 20 mm/s, distance between stands: 960 mm, bending length: 1,300 mm, retraction speed: 20 mm/s, throat depth of stand: 410 mm, working length: 1,300 mm, input voltage: 200 V, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg Deb Haowgw Hhsdgascg

Condition: excellent (used), Year of construction: 2016, vertical cnc glass drilling + milling machine MRX 130 roto 10 voltage 3 x 400 V 50 A power : 23 Kw Dsb Hadgjwg Ax Asaocg + vertical glass washing machine top clear TC16 super-4 ( max. 20 mm glass ) 3 x 400 V 30 A power : 12 Kw machine catalogue on demand .

Condition: used, Functionality: fully functional, machine/vehicle number: #1039, Year of construction: 2019, operating hours: 983 h, load capacity: 3,500 kg, lifting height: 12,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, fork length: 1,200 mm, engine type: Deutz TD 3.6 L ( 75 PS ) Stage 5, drive type: Diesel, Diesel forklift Chassis number: #1039 Mast type: Telescopic Dcob Hswg Ng Toadgasg Transmission: hydrostatic Technical condition: very good Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, exterior mirrors, windshield wipers, 20 KM/H, CE certificate

Condition: used, mileage: 134,110 km, gearing type: mechanical, axle configuration: 4x2, first registration: 08/2019, color: other, suspension: steel, brakes: engine braking, tire size: 225/65R 16C 112/110T, Year of construction: 2019, Equipment: ABS, cruise control, electronic stability program (ESP), = Additional Options and Accessories = Dceb Haswgrapedgaog - Electric Exterior Mirrors - Electric Windows - Spare Key - Speed Limiter - AC Power - Central Locking = Remarks = Car-Pass URL: Car-Pass ID: 281b3e73-252a-453d-823b-923fb26ad236 = Additional Information = Tire Size: 225/65R 16C 112/110T Brakes: Disc Brakes Suspension: Leaf Spring Front Axle: Steered; Left Tire Tread: 90%; Right Tire Tread: 90% Rear Axle: Left Tire Tread: 90%; Right Tire Tread: 90% Curb Weight: 2,200 kg Payload: 1,100 kg GVW: 3,300 kg Damage: None

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Dceb Hajwcna Redgajg Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Functionality: fully functional, machine/vehicle number: 4034, Year of construction: 2016, operating hours: 380 h, load capacity: 1,300 kg, lifting height: 8,000 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, fork length: 1,200 mm, drive type: Elektro, Narrow-aisle forklift truck Chassis number: 4034 Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Djbjwg Nd Es Hadgascg Front tires Type: Polyurethane Front tires Condition: 60 - 80% Rear tires Type: Polyurethane Rear tires Condition: 60 - 80% Battery Volt: 80V Battery type: PzS Battery condition: 60 - 80% Sideshift, 3rd valve,

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 30,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Dceb Hajwcm Dhedgajg Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Control system with hot runners Hardened injection unit - bimetal Main machine motor - Servomotor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Functionality: fully functional, Year of construction: 2025, load capacity: 1,300 kg, lifting height: 115 mm, fuel type: electric, drive type: Elektro, Low lift truck Technical condition: normal Dcob Hadjwg I Rwsgajg Lithium-ion technology,

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Dceb Hadgewcm Hcoaeg Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Djb Hswcm Awjadgascg Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Djb Hadowcm H Aegajcg Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Dobowcna Dj Hadgaecg Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Dcsb Haowcnbzedgaeg Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Arburg 520A 1300-170 Alldrive / Electric machine / Operating hours: 28,847 in automatic mode Year of manufacture: November 2007 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 cc Clamping unit: Clamping force: 130 t Type distance: 520 x 520 mm Clamping platen size: 728 x 728 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Machine in very good technical condition Electric machine: high-speed, energy-saving, and very quiet Operating hours: 28,847 in automatic mode Euromap 67 Robot interface Hydraulic core pull x 1 Control system with hot runners x 12 Hardened bimetal injection unit Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Central lubrication Proportional valve on the injection unit for precise injection Built-in sorting flap Complete Priamus system for mold pressure control (available for an additional charge) Dimensions: Weight: 7100 kg Length/Width/Height: 3.98 x 1.88 x 2.11 m Dcsbjwcncle Hadgaeg All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Dcob Hadgjwcnmksaog Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Dob Haewcnmwsdgajcg Injection pressure: 2000 bar Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request