Used Gesan Dps 13 Supersilent Generatorset for sale (31,776)

Condition: used, mileage: 496,284 km, power: 294 kW (399.73 HP), first registration: 10/2013, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 10/2025, brakes: retarder, gearing type: automatic, emission class: euro5, loading space volume: 13 m³, total width: 2,550 mm, total height: 2,850 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, PIPE tank structure for fuels, capacity 13,350 liters, 2 chambers, 1st chamber 6,700 liters, 2nd chamber 6,650 liters, ADR type class AT, SENING pump system for moderate emptying, type: GMVT 805-J, centrifugal pump type: "BELTA II", output 800 l/min., gas measuring device from SENING, type: GMVTD, temperature mass conversion (TMU): make BARTEC, with electronic meter and fully electronic valve control, additive system, receipt printer, 1 x hose reel(s) with approx. 38 mm full hose, length approx. 40 m., connection for trailer filling at the rear, bottom filling, retarder, adaptive cruise control (ACC), ABS, ASR, ESP, differential lock rear, hill start assist, cruise control, auxiliary drive, battery disconnect switch, air conditioning, Auxiliary heating, heated and electrically adjustable exterior mirrors, electric windows on driver and passenger doors, roof hatch, multifunction steering wheel, rearview camera, radio with CD and Bluetooth, driver's comfort suspension seat, central locking with remote control, additional headlights in the exterior sun visor, fog lights in the bumper, air suspension with a lifting and lowering device on the rear axle, Dura-Bright aluminum rims. The vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new MOT (German Technical Inspection Authority) inspection. If a new MOT is required, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Cobewc H Iyo Exp Tksrb

Condition: excellent (used), mileage: 254,623 km, power: 93 kW (126.44 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,450 mm, first registration: 05/2015, loading space length: 3,760 mm, loading space width: 1,910 mm, loading space height: 1,950 mm, fuel tank capacity: 75 l, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, tire size: 195/75R16, Year of construction: 2015, Equipment: ABS, air conditioning, airbag, cruise control, power assisted steering, soot filter, tail-lift, trailer coupling, Technical information Number of cylinders: 4 Engine capacity: 2.287 cc Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1900 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Max. axle load: 2600 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Measures Dimensions (LxBxH): 660 x 209 x 295 cm Weights Empty weight: 2.855 kg Carrying capacity: 645 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA, tail lift, 1000 kg Cooling: -20 °C to 20 °C Make of bodywork: Cazaux PULSOR 400 ROAD/ STANDBY 400V Cooling engine: diesel and electric Wall thickness: 10 mm Maintenance, history and condition APK (MOT): tested until 08/2025 Technical condition: very good Visual appearance: very good Identification Crjb Expjwgycxo Tkjb Registration number: V-46-LBT Other information Cool unit make: Carrier Additional information Please contact Moussa or Youssef for more information Video working vehicle: Very neat Iveco Daily 35C13 Emission class 6 Refrigerated truck with tail lift and tow bar (3.5T) Cooling Carrier Pulsor 400 day and night 400V standby Can cool as well as heat -20/+20 degrees Refrigeration body is from Cazaux and original also 2015 Tail lift Dhollandia 1000 KG 254,000 KM demonstrably walked Cool unit brand: Carrier

Condition: used, mileage: 55,587 km, power: 235 kW (319.51 HP), first registration: 04/2022, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, MAN TGM 18.320 4x2 BB with Fassi F135 Meiller tipper * Wheelbase 3,875 mm * Rear frame overhang 1,125 mm * MAN TipMatic 12 12 OD transmission * 150-liter fuel tank, right-hand side * 35-liter AdBlue fuel tank * VP-09 driven front axle * 7.5-ton parabolic front springs * 11.5-ton parabolic rear springs * Hydraulic steering * Height and tilt adjustable steering wheel * MAN BrakeMatic * AP axle ratio i=4.83 * Rear axle differential lock * Front axle differential lock with buzzer * MAN EasyStart with TipMatic * C cab 2,240 mm wide, 1,620 mm long * Air-suspended driver's seat with lumbar support, shoulder adjustment, and heating. Static passenger seat with storage compartment * Vico fan * EDC engine control * Oil pan for gradeability up to 30% * Transmission functionality: Efficient Roll * N-drive NH/1C without flange f=1.22 * Fuel pre-filter (oil-water separator) * Meiler axial pump 270/45 * Actuator for tipping bridge in the cab with loading crane * Front-wheel drive can be engaged * Comfort driver package * Air conditioning with automatic Temperature control * Engine brake with additional brake pedal actuation * Flame start system * Rear underride protection * Rockinger 400G150A trailer hitch * Steering wheel lock * Multifunction steering wheel for cab * Drum brakes front and rear axle * Coil-sprung cab suspension * Headlight range adjustment * Halogen twin headlights H7 * 2 work lights on cab roof * Central locking * Remote control for central locking * TollCollect preparation Ceb Exp Tjwg Stiokjrb * 24 V 15-pin trailer socket at the end of the frame * Trailer socket for ABS at the end of the frame * 2 x 12 V 180 Ah batteries * Audible warning system can be deactivated * Cruise control * MAN sound system * MAN Media Package Navigation * Navigation SD card Europe Total * Digital radio reception DAB+ * Hands-free functionality Comfort * MAN CameraView preparation for rear view camera (2 cameras) * AUX-in/USB in the Dashboard * 2 halogen rotating beacons * Rear axle stabilizer * Front axle stabilizer * Tinted laminated glass windshield * Tinted door windows * Electric door windows for driver and passenger * Folding sun visor * Sun visor in front of windshield * Right-hand curb mirror, heated and electrically adjustable * Heated and electrically adjustable rearview and wide-angle mirrors * Spray mist reduction * 1 wheel chock * Smoking kit * 600 mm side walls * Folding side walls * 800 mm front wall * Access ladder stored under tipping body * 600 mm rear wall * FASSI F135AC.0.24 loading crane * Hydraulic outriggers * Radio remote control We are happy to provide you with further information.

Condition: good (used), - Used machine Ceb Exswhvfxsp Tksrb - Passage width: 1350 mm - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Condition: good (used), mileage: 908,767 km, power: 338 kW (459.55 HP), first registration: 10/2015, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 385/55, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2015, = Additional options and accessories = - Hydraulic tilt system Crebjwg Alcs Exp Tkeb - Power take-off (PTO) = Additional information = AdBlue system: Yes Transmission: I-shift, 15-speed, automatic Front axle: Tire size: 385/55; Steered; Left tire profile: 65%; Right tire profile: 65%; Suspension: Leaf spring Rear tire size: 315/70 Body make: Volvo Technical condition: Good Visual condition: Average Damage: Damaged vehicle (not drivable) Contact Maarten Busser or Niels Busser for further information.

Year of construction: 2012, Condition: ready for operation (used), A Scharmann bench drilling and milling machine is available. The machine was completely overhauled in 2012, travel X/Y: 6150mm/3500mm, digital display: Heidenhain, including a setting table. An on-site inspection is possible. Ceb Exewhfpasp Tksrb

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Crsb Exswcnb Ujp Tksb Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, vertical cnc glass drilling + milling machine MRX 130 roto 10 voltage 3 x 400 V 50 A power : 23 Kw Creb Exp Tswg Ax Asksb + vertical glass washing machine top clear TC16 super-4 ( max. 20 mm glass ) 3 x 400 V 30 A power : 12 Kw machine catalogue on demand .

Condition: used, mileage: 55,587 km, power: 235 kW (319.51 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, first registration: 04/2022, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, MAN TGM 18.320 4x2 BB with Fassi F135 Meiller tipper * Wheelbase 3,875 mm * Rear frame overhang 1,125 mm * MAN TipMatic 12 12 OD transmission * 150-liter fuel tank, right-hand side * 35-liter AdBlue fuel tank * VP-09 driven front axle * 7.5-ton parabolic front springs * 11.5-ton parabolic rear springs * Hydraulic steering * Height and tilt adjustable steering wheel * MAN BrakeMatic * AP axle ratio i=4.83 * Rear axle differential lock * Front axle differential lock with buzzer * MAN EasyStart with TipMatic * C cab 2,240 mm wide, 1,620 mm long * Air-suspended driver's seat with lumbar support, shoulder adjustment, and heating. Static passenger seat with storage compartment * Vico fan * EDC engine control * Oil pan for gradeability up to 30% * Transmission functionality: Efficient Roll * N-drive NH/1C without flange f=1.22 * Fuel pre-filter (oil-water separator) * Meiler axial pump 270/45 * Actuator for tipping bridge in the cab with loading crane * Front-wheel drive can be engaged * Comfort driver package * Air conditioning with automatic Temperature control * Engine brake with additional brake pedal actuation * Flame start system Creb Exowg Stcep Tkjb * Rear underride protection * Rockinger 400G150A trailer hitch * Steering wheel lock * Multifunction steering wheel for cab * Drum brakes front and rear axle * Coil-sprung cab suspension * Headlight range adjustment * Halogen twin headlights H7 * 2 work lights on cab roof * Central locking * Remote control for central locking * TollCollect preparation * 24 V 15-pin trailer socket at the end of the frame * Trailer socket for ABS at the end of the frame * 2 x 12 V 180 Ah batteries * Audible warning system can be deactivated * Cruise control * MAN sound system * MAN Media Package Navigation * Navigation SD card Europe Total * Digital radio reception DAB+ * Hands-free functionality Comfort * MAN CameraView preparation for rear view camera (2 cameras) * AUX-in/USB in the Dashboard * 2 halogen rotating beacons * Rear axle stabilizer * Front axle stabilizer * Tinted laminated glass windshield * Tinted door windows * Electric door windows for driver and passenger * Folding sun visor * Sun visor in front of windshield * Right-hand curb mirror, heated and electrically adjustable * Heated and electrically adjustable rearview and wide-angle mirrors * Spray mist reduction * 1 wheel chock * Smoking kit * 600 mm side walls * Folding side walls * 800 mm front wall * Access ladder stored under tipping body * 600 mm rear wall * FASSI F135AC.0.24 loading crane * Hydraulic outriggers * Radio remote control We are happy to provide you with further information.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, total height: 2,317 mm, pressing force: 36 t, total width: 2,140 mm, total length: 2,740 mm, throat depth: 410 mm, overall weight: 3,600 kg, operating speed: 20 mm/s, distance between stands: 960 mm, bending length: 1,300 mm, retraction speed: 20 mm/s, throat depth of stand: 410 mm, working length: 1,300 mm, input voltage: 200 V, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Crsb Exjwgw Hhop Tksb Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg

Condition: used, Year of construction: 1985, operating hours: 891 h, Empty weight: 12.365 kg Dimensions (LxBxH): 916 x 244 x 317 cm Serial number: 078 Crob Exewckrpjp Tksb Condition undercarriage: 90% Ex-army Caterpillar 130G Motor Grader, Only 891 hours on meter! Machine is in as-new condition, Low profile E-rops cab, 6F-6R powershift transmission, 12ft (3.65 Mtr) moldboard with new cutting edge, hydr. tip control, rear ripper with full set of teeth, scarifier, centershift, engine enclosures, 14.00R24 Firestone tyres on average 90% remaining, front and rear work lights. Machine is in very clean condition. Machine can be repainted in original Cat colors at extra costs. Inspections are welcome. Multiple units available from stock!

Condition: used, Functionality: fully functional, machine/vehicle number: #1039, Year of construction: 2019, operating hours: 983 h, load capacity: 3,500 kg, lifting height: 12,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, fork length: 1,200 mm, engine type: Deutz TD 3.6 L ( 75 PS ) Stage 5, drive type: Diesel, Diesel forklift Chassis number: #1039 Mast type: Telescopic Transmission: hydrostatic Technical condition: very good Sideshift, Creb Exswg Ng Tjp Tkjb 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, exterior mirrors, windshield wipers, 20 KM/H, CE certificate

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 1300V/315 V-R / Vertical injection molding machine with rotary table Year of construction: 1997 Crob Expswcm Igo Tkjb Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 454x740 mm Size of the clamping platens: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/width/height: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating output: 8.98 kW Total output: 27.48 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 55,587 km, power: 235 kW (319.51 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2022, emission class: euro6, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN TGM 18.320 4x2 BB with Fassi F135 tipper trailer * Wheelbase 3,875 mm * Rear frame overhang 1,125 mm * MAN TipMatic 12 12 OD transmission * 150 l fuel tank, right * 35 l AdBlue fuel tank * VP-09 driven front axle * 7.5 t parabolic front springs * 11.5 t parabolic rear springs * Hydraulic steering * Height and tilt adjustable steering wheel * MAN BrakeMatic * AP axle ratio i = 4.83 * Rear axle differential lock * Front axle differential lock with buzzer * MAN EasyStart with TipMatic * C cab 2,240 mm wide, 1,620 mm long * Air-suspended driver's seat with lumbar support, shoulder adjustment, and heating. Static passenger seat with storage compartment * Vico fan * EDC engine control * Oil pan for gradeability up to 30% * Transmission functionality: Efficient Roll * N-drive NH/1C without flange f=1.22 * Fuel pre-filter (oil-water separator) * Meiler axial pump 270/45 * Actuator for tipping bridge in the cab with loading crane * Front-wheel drive can be engaged * Comfort driver package * Air conditioning with automatic Temperature control * Engine brake with additional brake pedal actuation * Flame start system * Rear underride protection * Rockinger 400G150A trailer hitch * Steering wheel lock * Multifunction steering wheel for cab * Drum brakes front and rear axle * Coil-sprung cab suspension * Headlight range adjustment * Halogen twin headlights H7 * 2 work lights on cab roof * Central locking * Remote control for central locking * TollCollect preparation * 24 V 15-pin trailer socket at the end of the frame * Trailer socket for ABS at the end of the frame Cob Expjwg Srxe Tksrb * 2 x 12 V 180 Ah batteries * Audible warning system can be deactivated * Cruise control * MAN sound system * MAN Media Package Navigation * Navigation SD card Europe Total * Digital radio reception DAB+ * Hands-free functionality Comfort * MAN CameraView preparation for rear view camera (2 cameras) * AUX-in/USB in the Dashboard * 2 halogen rotating beacons * Rear axle stabilizer * Front axle stabilizer * Tinted laminated glass windshield * Tinted door windows * Electric door windows for driver and passenger * Folding sun visor * Sun visor in front of windshield * Right-hand curb mirror, heated and electrically adjustable * Heated and electrically adjustable rearview and wide-angle mirrors * Spray mist reduction * 1 wheel chock * Smoking kit * 600 mm side walls * Folding side walls * 800 mm front wall * Access ladder stored under tipping body * 600 mm rear wall * FASSI F135AC.0.24 loading crane * Hydraulic outriggers * Radio remote control We are happy to provide you with further information.

Condition: used, Functionality: fully functional, machine/vehicle number: 4034, Year of construction: 2016, operating hours: 380 h, load capacity: 1,300 kg, lifting height: 8,000 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, fork length: 1,200 mm, drive type: Elektro, Narrow-aisle forklift truck Chassis number: 4034 Csb Ejwg Nd Eexp Tkerb Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Polyurethane Front tires Condition: 60 - 80% Rear tires Type: Polyurethane Rear tires Condition: 60 - 80% Battery Volt: 80V Battery type: PzS Battery condition: 60 - 80% Sideshift, 3rd valve,

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Crsb Expjwcna Rs Tksb Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 30,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Creb Expewcm Dhj Tkeb Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Control system with hot runners Hardened injection unit - bimetal Main machine motor - Servomotor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever Crob Eswcm Hcsxp Tkob control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Creb Exp Tjwcm Awjkob Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition Crob Exowcm H Aep Tkjb 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Cob Exp Tswcna Djkerb Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Cob Exp Towcnbzeksrb Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Arburg 520A 1300-170 Alldrive / Electric machine / Operating hours: 28,847 in automatic mode Year of manufacture: November 2007 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 cc Clamping unit: Clamping force: 130 t Type distance: 520 x 520 mm Clamping platen size: 728 x 728 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Machine in very good technical condition Electric machine: high-speed, energy-saving, and very quiet Operating hours: 28,847 in automatic mode Euromap 67 Robot interface Hydraulic core pull x 1 Control system with hot runners x 12 Hardened bimetal injection unit Main machine motor - servo motor driven by an inverter - energy saving Crsb Eswcncloxp Tkeb The injection unit is driven by a servo motor controlled by an inverter Central lubrication Proportional valve on the injection unit for precise injection Built-in sorting flap Complete Priamus system for mold pressure control (available for an additional charge) Dimensions: Weight: 7100 kg Length/Width/Height: 3.98 x 1.88 x 2.11 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Csb Exp Tswcnmkjkjrb Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Injection pressure: 2000 bar Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Csbjwcnmws Exp Tkjrb Clamping unit: hydraulic Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request