Used Tabe Agb-12 for sale (50,882)

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 223A011235002, warranty duration: 12 months, year of last overhaul: 2024, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235002 Condition: Refurbished Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) Cgjlim Tjubuyketyst • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side • Identical machine available for parallel or cross strapping at high speed

Condition: good (used), Functionality: fully functional, machine/vehicle number: BVE6368, Year of construction: 2011, operating hours: 4,397 h, load capacity: 3,000 kg, lifting height: 5,020 mm, free lift: 580 mm, fuel type: electric, mast type: standard, Battery overhauled in 2018 TECHNICAL DETAILS Motor: Electric Lift capacity: max. 3,000 kg LSP: 600 mm Mast & Lifting System Lift height: 5,020 mm Free lift: 580 mm Mast type: Standard, fork carriage tilt Mast height: 3,260 mm Platform width: 1,200 mm Platform height: 520 mm Forks Fork dimensions: 150 mm x 50 mm x 1,200 mm Fork positioner: 410 / 3,610 mm Battery Voltage: 48 V Capacity: 930 Ah Battery year of manufacture: 2018 MACHINE DETAILS Dimensions Length: 2,850 mm Width: 2,350 mm Height (total): 2,550 mm Weight: 8,322 kg EQUIPMENT - Loader - Fork carriage tilt Cjlim Tjv S Eufotysgt

Condition: used, Year of construction: 2016, operating hours: 87 h, lifting height: 5,660 mm, fuel type: electric, load capacity: 227 kg,

Condition: used, Year of construction: 2018, operating hours: 74 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, gearing type: automatic, overall weight: 716 kg, empty load weight: 495 kg, color: red, mileage: 74 km, first registration: 12/2018, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The used Toyota SWE 080L pallet stacker is a 2018 model, equipped with a battery from December 2022. It has a mileage of only 74 kilometers and 74 operating hours. The pallet stacker features electric drive technology that enables environmentally friendly and efficient operation. The vehicle comes in a metallic red paint finish and offers automatic transmission control. It is designed for a single operator and is suitable for a wide range of applications in industry or logistics. The pallet stacker has a gross vehicle weight of 716 kg and is in used but well-maintained condition. Colim Tov Tqx Sstysgt Viewings can be arranged without prior appointment, and delivery within Germany is possible for an additional charge. For further information or inquiries, please contact us by phone or email. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: good (used), Year of construction: 1989, - Year of construction : 1989 - capacity up to 12 to/h - With squeezing rollers - Feed hopper 820 x 820 mm - With underframe H: 900 mm Cgjlim Toum Tbrotyot - Dimensions: L 2200 x W 550 x H 1800 mm (incl. underframe) - Machine in good condition

Condition: used, Year of construction: 2013, Technical details: Cgelisuyp Ensm Ttyet faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: used, Year of construction: 2021, Aluminum DN 2-12 bucket separator / incl. OilQuick OQ65 / 12 - 28 tons / Year of manufacture: 2021 / in stock & available immediately Price: €25,890.00 net / €30,809.10 gross - Operating weight (kg): 1,260 - Excavator class (t): 12 - 28 - Cutting width (mm): 1,200 - Volume (m³): 0.52 - 0.66 - Oil flow (l/min): 95 - 160 Equipment: - incl. OilQuick OQ65 attachment We have a very large selection of different attachments in stock, all available immediately! Mr. Herden (Tel.) will be happy to assist you. Celim Ttjv Tgbveyogt We would also be happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are also one of the largest commercial vehicle dealers in Germany with 800 used vehicles. Subject to errors and prior sale! Internal No.: 221009

Condition: ready for operation (used), Year of construction: 1996, General Data Measurements width 950 mm Measurements depth 1500 mm Measurements height 1650 mm Machine weight 950 kg Control Unit Brand FANUC Model Series 21-T Main Drive Number of axis 4 Tools Number of index 5 Additional Equipment Celiov Db E Rsm Ttyegt Bar feeder Coolant pump Transformers New, unused oil mist collector CM300 set + HEPA H13 This 4-axis STAR MICRONICS SH-12 swiss type turning machine was manufactured in 1996. It offers precision and efficiency for complex turning operations. Ideal for intricate parts production in industries requiring high precision. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Spindle mount Bt 40 Spindle speed 12000 rpm Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Axis B 360 degrees Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Cgelstr Um Toim Ttyot Equipped with Internal spindle cooling Chip conveyor

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: SPOV-XS50, total length: 2,455 mm, total width: 1,804 mm, total height: 2,365 mm, controller model: Siemens HMI, TECHNICAL DETAILS Material: Stainless steel Performance Preparation area: 6 m² Preparation methods: Steaming, roasting, baking (or combination) Control and operation Temperature control: PID Cgslim Ttjv S Hnyoyot User interface: Siemens HMI (Human Machine Interface) Adjustment options: Temperature, steam percentage, air circulation speed MACHINE DETAILS Length: 2,455 mm Width: 1,804 mm Height: 2,365 mm FEATURES - Insulated and hermetically sealed - Clean-In-Place cleaning system - Automatic belt cleaner - Integrated fire extinguishing system

Year of construction: 1975, Condition: refurbished (used), - Flow rate: up to 12 to/h - With integrated piston pumpe Celioix Nlnjm Ttyogt - Completely overhauled in 2020

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Cgslimel Twcuo Ttyjt Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: like new (used), Year of construction: 2017, operating hours: 2,902 h, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,440 mm, lifting capacity: 1,200 kg, Manufacturer + model:LINDE R 12 B Mast:3F5400 ID:25032.5126 Cat.:Used Mast:3F5400 Lowered height:2440 mm Lifting height:5400mm Capacity:1200kg Year:27 Hours:2902 hours Cgelijv Si Aaem Ttyot Capacity:48v / 620ah

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 578/08, number of drawers: 12, Storage system for jumbo sizes of 6000mm with 12 positions. Cslimjv E Iz Is Ttyegt

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible Cgelim Teuxfucetyot External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm Cslim Tsv Skzkjtysgt engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: used, Year of construction: 2014, operating hours: 1,240 h, Field of application: Construction Please contact Martin Gervink for more information Cgslim Tsv Sirnjtyjt

Condition: excellent (used), Recutting circular saw FR 12 Cutting height 285mm Saw shaft fixed at bottom Saw shaft adjustable at top Squared timber ruler installed Main motors 2 x 160kW incl. hydraulic unit without electrics Converted Linck roller unit as infeed device for squared timber Cgoleim I Dnjim Ttyjt General overhaul of the machine possible.

Condition: like new (used), Year of construction: 2017, operating hours: 3,813 h, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, lifting capacity: 1,200 kg, Manufacturer + model:LINDE R 12 B Mast:3F4500 ID:25024.71 Celsv Siz Njim Ttysgt Cat.:Used Mast:3F Lowered height:2120 mm Lifting height:4500mm Capacity:1200 kg Year:27 Hours:3813 hours Capacity:48v / 465ah

Condition: good (used), Year of construction: 1998, total height: 4,800 mm, installation height: 1,400 mm, total width: 2,600 mm, total length: 2,100 mm, pressing force: 65 t, table width: 1,100 mm, table length: 1,600 mm, overall weight: 9,000 kg, clearance between the columns: 1,100 mm, stroke distance: 500 mm, drop-through hole in table: 550 mm, Hydraulic Deburring Press, 4-Columns, capacity 65 to, stroke 500 mm, table size 1100x1500 mm, fall opening 450x550 mm, motor 15 kw, control SPS Dialog 11; dimensions 2600x2100x4800 mm, weight ca. 10'000 kgs Cslist U Dazsm Ttyogt

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, ----* Lift axle * Disc brake * Knorr brake * Air suspension * Storage box ----* Tire dimensions: 385/65 R22.5 * Total weight: 39,000 kg * Load capacity: 9,000 kg * Length (in mm): 13,950 mm * Width (in mm): 2,550 mm Colijudubtem Ttyjgt ----Internal vehicle number: 7473----Subject to errors and prior sale.

Year of construction: 2008, Condition: used, Jackhammer, Atlas Copco BBD 12 TS 01 Cjlimegrt Rqs Ttyegt Used condition, function tested, year of construction 2008, for drilling or chiselling

Condition: ready for operation (used), Bosch SE-B2.020.060 brushless servo motor, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Cgjlei D Hcioim Ttyet

Condition: ready for operation (used), Heidenhain QSY 155D 339 881-84 Feed motor SN: 13071242, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos The agreed sales discounts do not apply to this item. Please ask for price separately! Celim Ttsvc Nnwjyogt

Condition: ready for operation (used), Siemens 6AV7726-1BA10-0AD0 Panel PC 670 12" Touch SN:Z, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please ask for price separately Cgjljtvcunjim Ttyot