Used Doosan Gc18S-5 for sale (326)

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. Hedpfxeullmdo Abrenu * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, machine/vehicle number: 13724, Year of construction: 1999, operating hours: 2,951 h, load capacity: 3,000 kg, lifting height: 3,850 mm, load center: 500 mm, construction height: 2,520 mm, fork length: 1,200 mm, front tire size: 8.15-15, rear tire size: 6.50-10, enginetype: LP Gas, manufacturer: Doosan Hsdoxfdypspfx Abronu

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Year of manuf. : 2022 Control : Siemens 828D - ShopMill Speed : 12000 rpm Hnodpfx Absw U Ia Terou Movement X/Y/Z : 1300/670/625 mm Tool holder : SK40 Spindle: Technology:Directdrive Speed (max.):12.000 rpm Power (max.):21,8 kW Torque (max.):152 Nm Taper:SK40 Workingtable: Clampingsurface:1.500 x 670 mm Tableloading (max.):1.300 kg In general: Toolmagazine:30 Stations Rapid travers in X/Y/Z:36/36/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor with oil skimmer Coolingmanagement:Internal coolant pump with Cyclon-filter and High-pressure, 20 bar Workpiecemeasurement:Touch probe, BLUM TC 50 Setup operations:Electronic handwheel Oilmistseparation:Mechanical extraction, Dormatec AF-20 Preparation 4th-Axis:Cable + plug Further Equipment:Spindle chiller, Trafo

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,690 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm Hedsw Afrdjpfx Abronu

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 530 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Hnodpfx Abeukxcvsrju Speed class: 20 Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, half-cabin, full free lift, twin tires,

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, Hnedpfow Npz Iox Abrou 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production. Hedpfx Aoxdwayobrsnu

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours Hjdpfoxcyd Ejx Abrjnu = Additional Information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 3517 mm Measurements depth 2300 mm Measurements height 2805 mm Machine weight 12000 kg Control Unit Hnedpfjw Uah Ajx Abreu Brand FANUC Model FANUC 31i-B Main Drive Number of axis 9 Workpiece Workpiece drm over bed 750 mm Additional Equipment Full licenses for MasterCam software available for programming Mastercam Lathe Mastercam Mill 3D Mastercam Multiaxis Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price This 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN MX2100ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, There are two of the same machine available. Hjdpfowzxcajx Abronu

Condition: new, Year of construction: 2019, load capacity: 6 kg, arm reach: 900 mm, Coobot Doosan M0609 Load capacity: 6 kg Reach: 900 mm Repeatability: ±0.05 mm Hnedpfx Absquqrvorju Condition: New

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Hnodpfx Abow I Tnisrou Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Hodpfjxcfgrsx Abrenu Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2010, operating hours: 4,500 h, Well-maintained Doosan DX 55 W wheeled excavator Technical data: * Engine: Yanmar 4TNV98Z * Engine power: 40.8 kW * Transport length: 5,850 mm * Transport height: 2,560 mm * Transport width: 1,880 mm * Reach: 6,150 mm * Max. digging depth: 3,780 mm Equipment includes: * Twin tires 8.25-15-14 PR * Dipper stick 1,900 mm * Hammer and two-way auxiliary piping * Grapple auxiliary piping * Dozer blade at the rear, storage at the front * Pipe rupture safety valves * Electric refueling pump Hnsdpfxsw D Nlws Abrju * Cab with air conditioning and heating * Comfort driver's seat with seat belt * Mechanical quick coupler MS03 * Rotating beacon Miscellaneous: * Attachments are NOT included – sale upon request !!! ATTENTION, sale only to commercial customers and for export !!!

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 Control Unit Brand FANUC Model 0i-TD Hedpfxow Tnqce Abrjnu Main Drive Number of axis 4 This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: 20220914015 Weights Empty weight: 5.650 kg Functional Hsdpfx Abjxbwvcersnu Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: new, Year of construction: 2018, load capacity: 15 kg, arm reach: 900 mm, Coobot Doosan M1509 Load capacity: 15 kg Reach: 900 mm Repeatability: ±0.05 mm Item condition: New Hnodpfxjquqrcj Abreu

Condition: used, Torni CNC Doosan Puma TW2600 Hnjdpew Slx Ujfx Abrju 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Hnodpfx Ajxcfglsbrju Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2006, Doosan Daewoo Ace-VC500 Twin Pallet Horizontal Machining Centre with Fanuc Series 21i-MB CNC Control, Table Size 860 x 570mm, CAT40 Spindle Taper, 34 Tool ATC, Travels X Axis 760mm, Y Axis 510mm, Z Axis 570mm, Hexagon Tool Eye. S/No. AV5C0692 (2006) Please Note: Dismantling and Loading will be carried out by our own supplier Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Hedpfx Abexdbv Eerenu

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 6500 kg Control Unit Hnsdew U E S Hspfx Abreu Brand FANUC Model i-Series Main Drive Spindle speed range 12000 rpm Movement X-Axis Movement 1050 Y-Axis Movement 570 Z-Axis Movement 510 Table Outer length 1300 mm Outer width 570mm Media Internal cooling Yes Additional Equipment Magazine capacity: 30 tools Holder type: ISO 40 This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2021. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the DOOSAN DNM 5700 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2010, Engine Power: 245kw Weight: 47500kg Maximum range: 12.15m Digging depth 7.8m Breaking Strength 30.8 kN Hnjdpeuf E Utefx Abrou Engine Manufacturer: Doosan Engine Type: DV11 Demolition Cage: Included

Condition: used, Year of construction: 2010, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model A CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Coolant Filtration System, Spindle Chiller, Machine Weight 31,000kg. S/No. HM12500058 (2010) - CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier Hedpfjxdbr Tsx Abrenu Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2014, Engine Power: 209kw Hodpfx Asuf E Uyobrjnu Weight: 34980kg Track Width: ~600mm Digging depth 7.3m Demolition Cage: Included

Condition: used, Year of construction: 2016, Doosan HM1250 Twin Pallet Horizontal Machining Centre with Fanuc Series 31i - Model B CNC Control, Travels X Axis 2100mm, Y Axis 1500mm, Z Axis 1500mm, Pallet Size 1250mm x 1250mm, CAT50 Spindle Taper, 60 Tool ATC, Renishaw Probe, Hydtec Hipreco KHS-375 High Pressure Coolant Filter Unit, Spindle Chiller, Machine Weight 31,000kg. S/No. MH0014 - 000201 (2016) - CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Hedpfxjxda D Io Abrsnu